NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - Anyone install a poly torque arm bushing?

Tru2Chevy · 04-18-2010, 07:05 PM

Lowering the cross member should get the tail of the trans low enough that you can get those long bolts out (that's how I swapped the bushing and tq. arm in my 3rd gen). I can't say for sure in a 4th gen if you will be able to get those long bolts out with the trans in place.

- Justin

04-18-2010, 07:05 PM	#3
Tru2Chevy Co-Founder / Site Admin Join Date: Jul 2004 Location: Ewing, NJ Posts: 22,476 iTrader: (8) Social Networks:	Lowering the cross member should get the tail of the trans low enough that you can get those long bolts out (that's how I swapped the bushing and tq. arm in my 3rd gen). I can't say for sure in a 4th gen if you will be able to get those long bolts out with the trans in place. - Justin __________________ 1999 Camry - Beigemobile DD 2002 Suburban - Wife's DD 2004 Grand Cherokee - Not running / Project / Selling?