NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

Green_Phoenix_LT1 · 07-14-2010, 11:32 AM

Ok I have tried just about everything to find this short in my dads 1996 Blazer 4dr 2wd. The ctsy fuse(fuse #2) blows on contact. i have unplugged everything on that circuit checked all the usual pinch points and grounds. And it still shorts out. This fuse powers the lift glass release, the dome lights, the power mirrors and the power seats. Beofre i give up and have a shop charge me out the ass to find it is there any advice anyone can give me. Again I cant stress enough that EVERYTHING on that circuit is unplugged. The fuse connectors are drawing enough power to melt the tips of the fuses on partial contact. I have also removed the fuse panel and looked inside of it to see if the short is in there and everything appears to be normal.

Please help

07-14-2010, 11:32 AM	#1
Green_Phoenix_LT1 Join Date: Oct 2009 Location: Sicklerville, NJ (South Jersey) Posts: 450 iTrader: (8)	Need help ASAP Ok I have tried just about everything to find this short in my dads 1996 Blazer 4dr 2wd. The ctsy fuse(fuse #2) blows on contact. i have unplugged everything on that circuit checked all the usual pinch points and grounds. And it still shorts out. This fuse powers the lift glass release, the dome lights, the power mirrors and the power seats. Beofre i give up and have a shop charge me out the ass to find it is there any advice anyone can give me. Again I cant stress enough that EVERYTHING on that circuit is unplugged. The fuse connectors are drawing enough power to melt the tips of the fuses on partial contact. I have also removed the fuse panel and looked inside of it to see if the short is in there and everything appears to be normal. Please help __________________ 1994 Z28 M6 Cat Back Last edited by Green_Phoenix_LT1; 07-14-2010 at 11:33 AM.