NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

emolineaux · 07-16-2010, 06:36 PM

hey guys. im doing a water pump job on a 1994 Camaro 3.4L v6 automatic. i pulled the stock intake off and found this connector laying on the frame. Any clue what it could be to? i looked around and didnt see any disconnected sensors(other than the ones i disconnected) or any where it would even plug in at. wiring goes back behind the abs unit and ties into the main harness that runs under the abs unit.

3 prong connector 2 red and 1 black wire.

07-16-2010, 06:36 PM	#1
emolineaux Join Date: Jan 2008 Location: Aberdeen,nc/columbus,nj Posts: 1,449 iTrader: (17)	any ideas what this is to? hey guys. im doing a water pump job on a 1994 Camaro 3.4L v6 automatic. i pulled the stock intake off and found this connector laying on the frame. Any clue what it could be to? i looked around and didnt see any disconnected sensors(other than the ones i disconnected) or any where it would even plug in at. wiring goes back behind the abs unit and ties into the main harness that runs under the abs unit. 3 prong connector 2 red and 1 black wire. __________________ Eric 07 Silverado 1500 5.3 01 Z28 6 speed Last edited by emolineaux; 07-16-2010 at 06:38 PM.