NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - 98 trans am mod questions any help would be appreciated

KirkEvil · 10-24-2010, 12:12 PM

SLP products are overrated. Their lid is cheap and fitment sucks, the 85mm MAF is a stock delphi with a slp sticker, and the bellow needs to be cut to properly fit a stock TB. I run all three products so maybe Im a hypocrite but I now know better.

A lid is the easiest mod to do on these cars, but dont expect to feel a big difference. The MAF and bellow will not be worth it until you get into big modifications. You are better off porting the stock MAF ends.

As for the TB, just get the stock one ported. I believe most places charge around $60 with core for that. It will give you a more responsive throttle feel.

10-24-2010, 12:12 PM	#9
KirkEvil 10 Second Club Join Date: Feb 2008 Location: Eatontown Posts: 1,647 iTrader: (11)	SLP products are overrated. Their lid is cheap and fitment sucks, the 85mm MAF is a stock delphi with a slp sticker, and the bellow needs to be cut to properly fit a stock TB. I run all three products so maybe Im a hypocrite but I now know better. A lid is the easiest mod to do on these cars, but dont expect to feel a big difference. The MAF and bellow will not be worth it until you get into big modifications. You are better off porting the stock MAF ends. As for the TB, just get the stock one ported. I believe most places charge around $60 with core for that. It will give you a more responsive throttle feel. __________________ 1999 C5 FRC: 12.7@114 2008 TBSS: 12.48@108 2017 Silverado 2500 do you even lift breh?