NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

grazi · 07-04-2011, 09:56 AM

The fans work when I ground plug #2 on #3 relay. The fans also work when I plug in my OBD1 code reader under dash. I swapped relays and still dont work. I also replaced ECT sesnor with nothing. I checked all of the relay grounds/power and all seemed good. The only thing that wsa weird was on SHObox website they had the relay plugs labeled differently than is on my U/H fuse panel.

07-04-2011, 09:56 AM	#3
grazi Join Date: Mar 2011 Location: Morris County Posts: 1,033 iTrader: (2)	The fans work when I ground plug #2 on #3 relay. The fans also work when I plug in my OBD1 code reader under dash. I swapped relays and still dont work. I also replaced ECT sesnor with nothing. I checked all of the relay grounds/power and all seemed good. The only thing that wsa weird was on SHObox website they had the relay plugs labeled differently than is on my U/H fuse panel. __________________ 94 Trans am 25th anniversary 86 Buick Regal T-type 73 camaro 454/T56 work in progress.