|
The caliper bracket bolts are 74 ft lbs
Guide pins 23 ft lb on the front and 27 on the rear
Just changing the rotors and pads you will not be messing with the parking brake on the rear backing plates unless you want to readjust the tension on the parking brake
Then there is a pin wheel on the inside of each backing plate
__________________
2002 Z/28 = Firemutt Racing 370 w/ Cam, Trick Flow heads, TPIS 90mm Intake & 90mm T.B., Vigilante 3600 t.c., Michael's Transmissions Built 4L60E.
QTP Headers, Mufflex Stainless Y-pipe, Pypes Performance Exhaust, Moser 12-bolt w/ 33 spline axles,Truetrac & 3:73's., Spohn.
Cartek Tuned...
Last edited by ins0mnia24; 11-05-2012 at 10:40 PM.
|