NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

V · 11-13-2012, 12:30 PM

Donor is a true stock '94 LT1/4l60e setup(trans am).
Project is a '93 z28 roller (was lt1/t56).

What would be my best bet to make this swap work?

-option 1: use '93 dash harness, 94 engine harness and custom wire up the auto shifter. will the firewall connectors even plug together, '93-'94?

-option 2: use '94 T/A dash/interior harness and modify all gauge and dash connectors to work with the camaro dash components. a lot of work but doable.

-option 3: buy and install a '94 automatic Camaro dash harness and use that to connect to the '94 T/A engine harness. That should work right?

11-13-2012, 12:30 PM	#1
V Stalker Join Date: Aug 2004 Posts: 12,082 iTrader: (12)	94 LT1 in a 93 z28.... Donor is a true stock '94 LT1/4l60e setup(trans am). Project is a '93 z28 roller (was lt1/t56). What would be my best bet to make this swap work? -option 1: use '93 dash harness, 94 engine harness and custom wire up the auto shifter. will the firewall connectors even plug together, '93-'94? -option 2: use '94 T/A dash/interior harness and modify all gauge and dash connectors to work with the camaro dash components. a lot of work but doable. -option 3: buy and install a '94 automatic Camaro dash harness and use that to connect to the '94 T/A engine harness. That should work right? Last edited by V; 11-13-2012 at 12:31 PM.