NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

Mezzy · 12-02-2012, 10:35 PM

So I'm going to be installing all new components in the chasis front and rear.

. I'm looking to retain the stock feel as I'm not interested in a poly feel. So I've gotten whatever GM parts I was able to get thru my local Chevy dealer, and the rest are U.S.A. made Moog parts. Here's what I've purchased so far just after replacing all fuel and all brake lines:
1. Bilstein Tuned Shock and Spring kit
2. Rear Spring Pads
3. Lakewood Rear Control Arms
4. Moog Rear Sway Bar bushings
5. GM Rear Sway Bar stabilizer links
6. Lakewood Adj. Panhard Rod
7. Polyurethene Torque Arm Mount
8. GM Goodwrench Trans Mount
9. GM Goodwrench Front Stabilizer Links
10. GM Front Sway Bar Bushings
11. Moog Inner Tie Rods
12. Moog Outer Tie Rods
13. Moog Control Arm Bushings
14. Moog Ball Joints
15. Gm Goodwrench Fuel Pump
16. GM Goodwrench Sending Unit.

12-02-2012, 10:35 PM	#1
Mezzy Join Date: Dec 2012 Location: North Jersey Posts: 222 iTrader: (0)	Chasis Overhaul on my 94 Z28 So I'm going to be installing all new components in the chasis front and rear. . I'm looking to retain the stock feel as I'm not interested in a poly feel. So I've gotten whatever GM parts I was able to get thru my local Chevy dealer, and the rest are U.S.A. made Moog parts. Here's what I've purchased so far just after replacing all fuel and all brake lines: 1. Bilstein Tuned Shock and Spring kit 2. Rear Spring Pads 3. Lakewood Rear Control Arms 4. Moog Rear Sway Bar bushings 5. GM Rear Sway Bar stabilizer links 6. Lakewood Adj. Panhard Rod 7. Polyurethene Torque Arm Mount 8. GM Goodwrench Trans Mount 9. GM Goodwrench Front Stabilizer Links 10. GM Front Sway Bar Bushings 11. Moog Inner Tie Rods 12. Moog Outer Tie Rods 13. Moog Control Arm Bushings 14. Moog Ball Joints 15. Gm Goodwrench Fuel Pump 16. GM Goodwrench Sending Unit.