NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - Getting my new 406 SBC installed, running, and driving

IROCZman15 · 06-09-2020, 09:59 AM

3,440 pounds without me in it, but with a completely full tank of fuel

I didn't think of it during the time at the track on saturday, but I forgot to check the DA density altitude. Luckily I used the TRC "That Racing Channel" phone app during two of the passes, and saved the info, and it logged the DA on it. it was hot and humid saturday so the DA was 2792 ft at 12:30pm and 2920 ft at 1:40pm that day. I put that number into the DA calculator/adjuster and learned that my 12.202 pass would be an 11.775 pass, at 116 mph. so thats promising, but I won't truly be happy until I have a few paper slips with and 11 second pass on them.

06-09-2020, 09:59 AM	#100
IROCZman15 10 Second Club / Meet Coordinator Join Date: Dec 2004 Location: Roxbury, NJ Posts: 2,101 iTrader: (8)	3,440 pounds without me in it, but with a completely full tank of fuel I didn't think of it during the time at the track on saturday, but I forgot to check the DA density altitude. Luckily I used the TRC "That Racing Channel" phone app during two of the passes, and saved the info, and it logged the DA on it. it was hot and humid saturday so the DA was 2792 ft at 12:30pm and 2920 ft at 1:40pm that day. I put that number into the DA calculator/adjuster and learned that my 12.202 pass would be an 11.775 pass, at 116 mph. so thats promising, but I won't truly be happy until I have a few paper slips with and 11 second pass on them. __________________ 1987 IROC-Z - modified Last edited by IROCZman15; 06-10-2020 at 09:33 PM.