NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - Getting my new 406 SBC installed, running, and driving

IROCZman15 · 07-15-2020, 07:53 PM

got the fuel pressure gauge installed in the fitting and oriented straight up like I wanted. some Jb-weld on the threads and let it cure. safe for fuel.

Was going to order the crank pulley bolts from Summit, but since I was running errands near Rockaway, I stopped at Bruce's Speed Shop and they had one pack left on the rack. Got them installed with red-lock-tite and will continue to check on them often. I will probably paint mark them. Would really love to find a nicer aluminum crank pulley instead of the UGLY painted stock steel one, but no need to do that now. maybe winter time

07-15-2020, 07:53 PM	#125
IROCZman15 10 Second Club / Meet Coordinator Join Date: Dec 2004 Location: Roxbury, NJ Posts: 2,101 iTrader: (8)	got the fuel pressure gauge installed in the fitting and oriented straight up like I wanted. some Jb-weld on the threads and let it cure. safe for fuel. Was going to order the crank pulley bolts from Summit, but since I was running errands near Rockaway, I stopped at Bruce's Speed Shop and they had one pack left on the rack. Got them installed with red-lock-tite and will continue to check on them often. I will probably paint mark them. Would really love to find a nicer aluminum crank pulley instead of the UGLY painted stock steel one, but no need to do that now. maybe winter time __________________ 1987 IROC-Z - modified Last edited by IROCZman15; 07-15-2020 at 07:54 PM.