Wife had a day off and took over baby duties, so out to the driveway.
Pulled the bumper cover off, and "fixed" the intercooler mount. I had caught something with the lower brackets and it bent the thing inwards towards radiator.
So bent stuff back to where it should be, replaced the 90* aluminum I had as a base with a straight steel piece. (you can see the aluminum on the ground).
The hope is that the opening from air dam is now larger and maybe it runs cooler on highway.
Used some of the radiator fan mounts to mount trans cooler to intercooler.
Also wired in a relay so the low oil sensor will work properly now via Holley dash.
Tmmr is oil change, curious how this stuff works.