[Blackbirdws6]

Quick update. Still getting the P0327 knock sensor low input code. Car drives perfectly fine but I see the 3.9 degs of knock retard on part/full throttle with load on the engine. Revving it in place doesn't trigger it unless I really just whack the the throttle but it's inconsistent. This makes me think that under load, the drivetrain is flexing like it will and something is touching/tapping.

Maybe something shifted just ever so slightly when the pan was done since the K member/motor mounts were unbolted. Something may be touching that wasn't before causing audible noise. Both driver and passenger lifter preload was redone recently so I guess she needs to go back in the air to see what may be causing the knock sensor to trigger.