I ran mine in the pressure port for awhile when I was rocking the 60e.
Treat it like any other gauge on the cluster, its a go/no go and not for real data numbers.
Drive around with HPT and get a good feel for pan temps compared to the pressure port numbers, then when you are comfortable with how the pan to port relationship is, ditch the laptop.
Biggest thing is to get a solid reference to OAT and ATF temps, and establish, "normal", then just check is everything is good to go.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|