[IROCZman15]

Got the vacuum canister installed today. Mounted it under the drivers side inner fender. Used 3/8" hose from the snipers 3/8" vacuum port routed to the 1-way valve at the tank. then 3/8" hose from the tank to the brake booster which also has a 1-way valve. There is a n unused port on the vacuum canister that I put a pipe-plug in to seal it off, but I am considering maybe buying a small vacuum gauge to put in there and then maybe setup my Go-Pro camera nearby so I can see some numbers during street, strip, and autoX driving. maybe. Thoughts?




Took the car out for a good 45 minute drive. Certainly much more consistent brakes. I took a bunch of highway exit ramps where I purposely went heavy and long pumps on the brake pedal and I was able to get a lot more long brake pedal pushes compared to how it used to be. Awesome!