|
10-19-2009, 05:11 PM
|
#1
|
Join Date: Dec 2004
Location: Browns Mills NJ/ Rotondo West FL
Posts: 3,054
|
Looking to tighten up the suspension...
I have a STB, springs and lca's...still feel some roll coming out of a turn what would you do next...Just looking for a nice tight feel...Im thinking SFC's...
__________________
AI HCR 241's , Lunati 223/236 .615/.626 114+2 , Full Exhaust , Ported Fast 92 , Ported LS2 TB , Veraram , 85mm MAF , Circle D 4000 , 3.42's , GTP 36# , CSP Dyno tune. More on the way
420 HP/367 TQ on a Unlocked Converter & still climbing.
|
|
|
10-19-2009, 05:13 PM
|
#2
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
sway bars help body roll. could get an autocross style torque arm but i doubt you wanna spend that money.
|
|
|
10-19-2009, 05:18 PM
|
#3
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,151
|
Do you have decent shocks?
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
10-19-2009, 05:26 PM
|
#4
|
Join Date: Dec 2004
Location: Browns Mills NJ/ Rotondo West FL
Posts: 3,054
|
Yes upgraded them when I did the springs a few mths back.
__________________
AI HCR 241's , Lunati 223/236 .615/.626 114+2 , Full Exhaust , Ported Fast 92 , Ported LS2 TB , Veraram , 85mm MAF , Circle D 4000 , 3.42's , GTP 36# , CSP Dyno tune. More on the way
420 HP/367 TQ on a Unlocked Converter & still climbing.
|
|
|
10-19-2009, 05:29 PM
|
#5
|
Join Date: Jan 2008
Location: Aberdeen,nc/columbus,nj
Posts: 1,449
|
i have weld in sfc on my 98. it helped a little. but i need to upgrade my stock torque arm and sway bars.
__________________
Eric
07 Silverado 1500 5.3
01 Z28 6 speed
|
|
|
10-19-2009, 05:35 PM
|
#6
|
Join Date: Dec 2004
Location: Browns Mills NJ/ Rotondo West FL
Posts: 3,054
|
Quote:
Originally Posted by emolineaux
i have weld in sfc on my 98. it helped a little. but i need to upgrade my stock torque arm and sway bars.
|
Yea looks like thats what i need to concentrate on....took the car to work today, car felt strong in the cold air but like garbage when i came outta the circles(damn autos )...Ft. Dix and Mcguire have alot .....
__________________
AI HCR 241's , Lunati 223/236 .615/.626 114+2 , Full Exhaust , Ported Fast 92 , Ported LS2 TB , Veraram , 85mm MAF , Circle D 4000 , 3.42's , GTP 36# , CSP Dyno tune. More on the way
420 HP/367 TQ on a Unlocked Converter & still climbing.
|
|
|
10-19-2009, 05:57 PM
|
#7
|
Join Date: May 2008
Posts: 817
|
speaking from my personal experience, I think sfc's are a little bit hyped up. they make the car feel a bit more stable and definitely more rigid, but as far as cornering improvement they're not a huge difference. without a doubt a good idea for the sake of your car, but not one of the first things I'd do for handling.
if i were you i'd do swaybars. those and shocks made the biggest differences for me. 35 front, 21 or 22 rear. it's a pretty huge improvement over stock. well worth the money.
__________________
|2000 Trans Am|T56 swap|Bolt Ons| Suspension|
|
|
|
10-19-2009, 06:03 PM
|
#8
|
Join Date: Dec 2004
Location: Browns Mills NJ/ Rotondo West FL
Posts: 3,054
|
Quote:
Originally Posted by creeper
speaking from my personal experience, I think sfc's are a little bit hyped up. they make the car feel a bit more stable and definitely more rigid, but as far as cornering improvement they're not a huge difference. without a doubt a good idea for the sake of your car, but not one of the first things I'd do for handling.
if i were you i'd do swaybars. those and shocks made the biggest differences for me. 35 front, 21 or 22 rear. it's a pretty huge improvement over stock. well worth the money.
|
Yea im going to look into swaybars...
__________________
AI HCR 241's , Lunati 223/236 .615/.626 114+2 , Full Exhaust , Ported Fast 92 , Ported LS2 TB , Veraram , 85mm MAF , Circle D 4000 , 3.42's , GTP 36# , CSP Dyno tune. More on the way
420 HP/367 TQ on a Unlocked Converter & still climbing.
|
|
|
10-19-2009, 06:12 PM
|
#9
|
11 Second Club
Join Date: Feb 2008
Location: Edison, NJ
Posts: 4,619
|
Make sure you dont have a broken sway bar mount up front... one of mine broke and it handled like ****
__________________
1999 Z28 Convertible. 6 speed swap, wide cowl hood, full hockey stripes, and a whining 10 bolt.
2008 Sierra Vortec Max. 6.2 swapped, headers, Magnaflow catback, GMPP CAI, NHT optioned tow package.
2006 GTO, 11.48 @ 118.3
|
|
|
10-20-2009, 10:07 AM
|
#10
|
Sliderule / Moderator
Join Date: Oct 2004
Location: Catawissa PA
Posts: 2,294
|
Look for a WS6 swap bar, bit thicker then the stock Zs. Also, don't forget about upgrading the swaybar mounts from the stock rubber to Poly mounts. One of the problems with F-bodies is that the rubber bushings in the A-arms wear out. Bit of a PITA to replace, but good poly bushing will help allot.
Also what tires are you running. I have the Nitto 555s up front and they handle well.
__________________
93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada
1) Build it
2) Race it
3) Break it
4) Repeat!!!
|
|
|
10-20-2009, 10:26 AM
|
#11
|
Join Date: May 2008
Posts: 817
|
I upgraded to a 32mm front bar and it was a slight improvement. then i went to 35/21 and it made a huge difference. unless you're able to find one cheap (got mine for free) i would go bigger. definitely go poly bushings though.
__________________
|2000 Trans Am|T56 swap|Bolt Ons| Suspension|
|
|
|
10-20-2009, 10:27 AM
|
#12
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Sway bars will make a big difference. The stiffness is not linear as well- it is to the 4th power. So small size changes have a bigger impact.
|
|
|
10-20-2009, 12:10 PM
|
#13
|
Join Date: Oct 2007
Location: Sewell, NJ
Posts: 1,044
|
3 PT subframe conectors - did notice a difference in roll
|
|
|
10-20-2009, 04:53 PM
|
#14
|
Join Date: Dec 2004
Location: Browns Mills NJ/ Rotondo West FL
Posts: 3,054
|
Alot of good Info...thx guys...Im running continentals up front but im getting another set of 18in. wheels to match the rears soon...I have ran Nitto 555s in the rear but never upfront.
__________________
AI HCR 241's , Lunati 223/236 .615/.626 114+2 , Full Exhaust , Ported Fast 92 , Ported LS2 TB , Veraram , 85mm MAF , Circle D 4000 , 3.42's , GTP 36# , CSP Dyno tune. More on the way
420 HP/367 TQ on a Unlocked Converter & still climbing.
|
|
|
10-25-2009, 05:09 PM
|
#15
|
Join Date: Jul 2004
Location: West Long Branch
Posts: 13,598
|
Sway bars would be the best move. Biggest improvement I noticed when I put on a set of 1LE 36mm hollow sway bar up front, and 25mm solid in the rear. Too bad the tires couldn't max it out till recently.
__________________
2/20/2013: They Day the ****s Stopped
|
|
|
10-26-2009, 09:41 AM
|
#16
|
11 Second Club
Join Date: Aug 2008
Location: Hagerstown, MD
Posts: 1,566
|
what are the stock ws6 sway bar sizes? i may look into some new suspension parts when i get home. also what are some good shocks?
__________________
J E R S E Y S H O R E O W N S Y O U
12 Sonic Turbo
07 Malibu SS
04 Silverado SS - Sold
00 Trans Am WS6 - Sold
-.:: United States Marine Corps ::.-
|
|
|
10-26-2009, 11:24 AM
|
#17
|
Join Date: May 2008
Posts: 817
|
32/19
and Koni's are pretty unanimously agreed to be the best
__________________
|2000 Trans Am|T56 swap|Bolt Ons| Suspension|
|
|
|
10-27-2009, 08:22 PM
|
#18
|
9 Second Club
Join Date: Dec 2004
Location: Merchantville
Posts: 518
|
Quote:
Originally Posted by MonmouthCtyAntz
Yes upgraded them when I did the springs a few mths back.
|
What shock do you have. Shock will improve the handling of the car more so than any other suspenion mod.
__________________
Twisted Minds Racing
2000 SS M6
9.71 @ 142
|
|
|
10-28-2009, 10:12 AM
|
#19
|
Join Date: Dec 2005
Posts: 396
|
springs and swaybars limit the amount of roll. shocks control the rate or how fast it rolls.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|