 |
05-11-2010, 06:55 PM
|
#1
|
Join Date: Jul 2006
Location: Hamilton, Nj/Glassboro, Nj
Posts: 799
|
Clutches
Im stuck between a spec stage 2 and a centerforce dual friction. Which one do you guys recommend? Also should i replace the slave/master cylinder and rear main seal?
__________________
93 Civic HB 1.5L-70hp :-p-Sold
94 Camaro Z28-CAI with bellow, LCAS, 3.73 gears, A4, 275/40/zr17-silver Zr1's, Magnaflow Stainless steel exhaust. For Sale-This Spring Best 1/4 Time-13.5-Sold
CURRENT RIDE- 99 Z28 with Ground Effects Slp intake Exhaust and Short Throw shifter- best 1/4 -13.34@105.6 New mods yet to be tested->Pacestter long tubes--->Tune by TTP= 349 RWHP 362 Ftlbs
|
|
|
|
05-11-2010, 07:02 PM
|
#2
|
Join Date: Apr 2008
Location: Delran
Posts: 6,785
|
i do not recommend a centerforce clutch. never had any experiences with a spec. theres been a ton of threads over clutches on this site...the search button is a good start 
and before anyone else says it......ive heard good things about josh's clutches 
|
|
|
|
|
05-11-2010, 07:09 PM
|
#3
|
Join Date: Jul 2006
Location: Hamilton, Nj/Glassboro, Nj
Posts: 799
|
yeh i would go josh's route its a fair price but not something i can afford right now. im going to have to do it myself i was just wondering which is better of the 2
__________________
93 Civic HB 1.5L-70hp :-p-Sold
94 Camaro Z28-CAI with bellow, LCAS, 3.73 gears, A4, 275/40/zr17-silver Zr1's, Magnaflow Stainless steel exhaust. For Sale-This Spring Best 1/4 Time-13.5-Sold
CURRENT RIDE- 99 Z28 with Ground Effects Slp intake Exhaust and Short Throw shifter- best 1/4 -13.34@105.6 New mods yet to be tested->Pacestter long tubes--->Tune by TTP= 349 RWHP 362 Ftlbs
|
|
|
|
|
05-11-2010, 07:10 PM
|
#4
|
Join Date: Nov 2009
Location: Oldbridge
Posts: 701
|
I've heard bad things about Spec on LS1.com ive heard good things about the LS7 clutch kit.. that may be where im headed
and Ive also read to change ur slave while your down there...might as well do the master too so ur good to go
__________________
2001 Camaro SS M6 LMII w/ LID (currently DD)
1987 Camaro IROC-Z 5.7 TPI RIP
1991 BMW 325i RIP
|
|
|
|
|
05-11-2010, 07:16 PM
|
#5
|
Join Date: Apr 2008
Location: Delran
Posts: 6,785
|
i liked the ls7 clutch that was in my t/a. really smooth, easy to push down and a nice engage point. its probably one of the nicer clutches ive ridden in terms of driveability. having an ultra stiff clutch is bad for someone like me with a bad knee 
out of those two clutches id rather go with an OEM or stock style clutch (ls7).
|
|
|
|
|
05-12-2010, 08:23 AM
|
#6
|
Join Date: Jul 2009
Location: barnegat nj
Posts: 1,340
|
centerforce no no no no no..... see josh for a clutch setup, or if you want to do yourself, the spec stage 3 works great! very little chatter excellantdrivability and pedal is near stock feel
__________________
Quote:
Originally Posted by SRGN
I never pulled into the staging beams at the track and saw a dyno in the other lane.
|
South Jersey Racecraft
|
|
|
|
|
05-12-2010, 04:52 PM
|
#7
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
make sure you budget flywheel resurfacing
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
|
|
05-12-2010, 04:59 PM
|
#8
|
Join Date: Feb 2005
Location: Orange County NY
Posts: 579
|
The Spec stage 2 is not a bad choice. I just installed one in a 98 TA and I honestly can't say anything bad about it. Give me a call/pm if you're looking for an install quote.
__________________
2000 Camaro 25.5 Turbo car  X275
|
|
|
|
|
05-16-2010, 07:59 PM
|
#9
|
|
13 Second Club
Join Date: Aug 2006
Location: Edison, NJ
Posts: 887
|
I just installed a stage 2 clutch from Diamond Clutches. Its rated to stand up to 600 rwhp and is still easy on the clutch pedal. I have it in my ride and I must say I am in love with it. I have had the Spec 2, Spec 3, LS6, CenterForce dual friction and none compare to this one. Right from the get go absolutely no chatter, and I fried my tires at 1st, 2nd, and 3rd gear. None of my other clutches have done that. He also has his own Master clutch cylinder cheaper then the Tick one. Either way I recommend you change it when you switch clutches to be safe.
|
|
|
|
|
05-17-2010, 01:16 PM
|
#10
|
Join Date: Aug 2005
Location: Blackwood, NJ
Posts: 2,295
|
I had a spec stage 3 in my V6 firebird and it was awesome. I made 370rwhp and 430rwtq and it was fine with that. Easy to drive but when you beat the hell out of the car it held great! I put about 75,000 miles on it!
I have a Spec Stage 2 plus in my 02 WS6. It is not as good as my Stage 3 was. I installed it at 58,000miles and now the car has 92,000 miles. It grabs good but I need to remove it to resurface the flywheel! If I did it again I would have gotten the stage 2 or stage 3. When I got the stage 2 + I had a set of LS6 heads and a 228r cam along with my nitrous kit off my V6 I was going to use! Then the baby came and I just wanted a reliable car so I put an extended warrenty on it and sold all the parts! The cluch is def overkill for a pretty much stock LS1!
__________________
Jeff
2002 WS6 T/A.. M6..Built 383 TMR tune..461rwhp,458rwtq
2009 G8 GT. Bone stock 13.6@103.. Vararam Intake, GXP Axlebacks, LS2 FRC's
1998 Corvette Convertible, Vararam Intake+Power Duct, Fast 90/90, Ti Axleback..12.8@110
2003 Cobra Convertible 10th Anniversary
http://www.fquick.com/slow-v6
Local car cruise schedule..
http://www.cliffscalendar.com/
|
|
|
|
|
05-18-2010, 10:23 PM
|
#11
|
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
Maybe it was just me, but i hated my Spec, i have a Textralia now, i love it.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
2001 Firebird, Formula M6 purchased brand new.
