Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > NJFBOA Forums > Site Sponsor and Group Purchases

Notices


Reply
 
Thread Tools
Old 11-02-2007, 02:45 PM   #1
TTPMatt
NJFBOA Supporting Sponsor
 
Join Date: Oct 2005
Location: Clifton, NJ
Posts: 98
iTrader: (0)
* Alignment rack is in & ready to go...

The alignment machine is up and running. Here is a quick pic of the machine.





4-Wheel Alignment: $105 (Must be stock suspension)

2-Wheel Alignment: $65 (Must be stock suspension)

Full custom street/strip, drag race, road race, alignment setups. All completed at "normal" labor rate of $85.00 per hour. A lot of cars will fall into the custom category because if you have adjustable panhard, adjustable lower control arms, etc. we can complete the alignment specs based on your specifications.

- Matt
__________________
www.ttperformance.net - 973-256-1234
5 Cardinal Drive
Little Falls NJ 07424

- TTP Race Car Fabrication: Custom fabrication completed in-house. Taking orders for winter; Pro-Mod, Pro-Stock, Top Sportsman, Outlaw.
- Full custom alignments completed in-house
- Full Custom Exhaust Setups. All bending done in-house.
TTPMatt is offline   Reply With Quote
Old 11-02-2007, 02:48 PM   #2
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,353
iTrader: (3)
very nice.

-Brian
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is offline   Reply With Quote
Old 11-02-2007, 03:47 PM   #3
WildBillyT
Ayatollah of Rock N Rolla / Admin
 
WildBillyT's Avatar
 
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
iTrader: (10)
Can you do an alignment on a C3 Vette? It would be to Vette Brakes' specs.
WildBillyT is offline   Reply With Quote
Old 11-02-2007, 04:30 PM   #4
Tru2Chevy
Co-Founder / Site Admin
 
Tru2Chevy's Avatar
 
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,473
iTrader: (8)
Social Networks:

Looks good Matt!

- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?

Tru2Chevy is offline   Reply With Quote
Old 11-05-2007, 04:47 PM   #5
TTPMatt
NJFBOA Supporting Sponsor
 
Join Date: Oct 2005
Location: Clifton, NJ
Posts: 98
iTrader: (0)
WildBilly: Sure. Bring your own custom specs we have no problem working with them. You can speak directly to my shop manager/suspension guru Jay Partyka about any custom alignments. Give us a call at 973 365 2270.
__________________
www.ttperformance.net - 973-256-1234
5 Cardinal Drive
Little Falls NJ 07424

- TTP Race Car Fabrication: Custom fabrication completed in-house. Taking orders for winter; Pro-Mod, Pro-Stock, Top Sportsman, Outlaw.
- Full custom alignments completed in-house
- Full Custom Exhaust Setups. All bending done in-house.
TTPMatt is offline   Reply With Quote
Old 11-05-2007, 06:46 PM   #6
BonzoHansen
Admin.
 
BonzoHansen's Avatar
 
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
iTrader: (27)
Billy IIRC those old vettes use odd shims for adjusting rear toe. Make sure they have them before you go.

I might have some here. If I do you can have them.
__________________
Vent Windows Forever!

The looser the waistband, the deeper the quicksand. Or so I have read.

Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.

Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
BonzoHansen is offline   Reply With Quote
Old 11-06-2007, 01:12 PM   #7
WildBillyT
Ayatollah of Rock N Rolla / Admin
 
WildBillyT's Avatar
 
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
iTrader: (10)
Quote:
Originally Posted by BonzoHansen View Post
Billy IIRC those old vettes use odd shims for adjusting rear toe. Make sure they have them before you go.

I might have some here. If I do you can have them.
Thanks for the heads up. I've already got the shims from installing the new traling arms, so I should be all set. Once I figure out my schedule over the next month or so I'll make an appointment.
WildBillyT is offline   Reply With Quote
Old 11-06-2007, 03:23 PM   #8
TTPMatt
NJFBOA Supporting Sponsor
 
Join Date: Oct 2005
Location: Clifton, NJ
Posts: 98
iTrader: (0)
Ok Bill let me know when you are ready we'll take care of you.
__________________
www.ttperformance.net - 973-256-1234
5 Cardinal Drive
Little Falls NJ 07424

- TTP Race Car Fabrication: Custom fabrication completed in-house. Taking orders for winter; Pro-Mod, Pro-Stock, Top Sportsman, Outlaw.
- Full custom alignments completed in-house
- Full Custom Exhaust Setups. All bending done in-house.
TTPMatt is offline   Reply With Quote
Reply

  NJFBOA - Home of New Jersey's Camaros and Firebirds > NJFBOA Forums > Site Sponsor and Group Purchases


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 01:50 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.