Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Camaros, Firebirds and the People that own them > Member's Rides > The Later Years 93-present

Notices


Reply
 
Thread Tools
Old 05-17-2018, 05:26 PM   #201
wretched73
 
wretched73's Avatar
 
Join Date: Nov 2007
Location: Jackson, NJ
Posts: 1,715
iTrader: (2)
I'm interested in your LT1 style T56 if you decided to sell it
__________________
1983 camaro- Scrap
1988 camaro- Also scrap
'05 Silverado- You guessed it, scrap
1988 TRX 250R- Ported w/ high compression on 110 octane- Out 60' your LT1

Jersey Shore Street Car Takeover (JSSCT) Founder

Quote:
Originally Posted by LS1ow View Post
and once i get PHB, what do i ajust it too?
Quote:
Originally Posted by Jersey Mike View Post
Seven.
wretched73 is offline   Reply With Quote
Old 05-17-2018, 06:15 PM   #202
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
Quote:
Originally Posted by wretched73 View Post
I'm interested in your LT1 style T56 if you decided to sell it
I'll keep you in mind. I may try to fix it myself or have it refurbished.
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is online now   Reply With Quote
Old 05-17-2018, 07:03 PM   #203
sweetbmxrider
Meet Coordinator
 
sweetbmxrider's Avatar
 
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,339
iTrader: (12)
Quote:
Originally Posted by Blackbirdws6 View Post
I'll keep you in mind. I may try to mount it myself or have it stuffed.
__________________
sweetbmxrider is offline   Reply With Quote
Old 05-20-2018, 05:27 PM   #204
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,892
iTrader: (8)
So, is that a negative on the powerglide shens?
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline   Reply With Quote
Old 05-20-2018, 05:41 PM   #205
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
Quote:
Originally Posted by LTb1ow View Post
So, is that a negative on the powerglide shens?
Affirmative
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is online now   Reply With Quote
Old 05-24-2018, 09:49 AM   #206
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
A few more updates with a general game plan.

Trans removal:
- Plan is to remove the trans/bell/clutch from the car this Saturday at the house.

- If nothing else looks screwed up that will cost me an additional arm/leg, then all aboard the wallet destroying train next week when I order all the things.

Part Selection:
- The T56 big boy will be the trans of choice with the stronger 9310 gear set. I plan on going with a slightly shorter 5th gear so if I ever decide to do another 1/4+ event, I will actually be able to see reasonable RPM/power in 5th. 6th will remain the same to maintain a nice highway cruising RPM. I'm told this trans will hold 1,200hp. I may splurge a bit and have them powdercoat the case. The current fluid pump system will be maintained.

- I spoke to a few clutch companies and I'm pretty set on a Monster LT1-S triple organic disc setup. The cost will be comparable to most any other reputable clutch plus they have done a few unicorn high powered LTx cars. The clutch should hold 1,000hp and drive similar to stock. One added benefit is they can make the slave hydraulic line length to my needs. The alternative would be replacing the master to slave line with a new one from Tick since the LS version is longer. The fitting style will still need to be converted though but this will be much less a PITA vs replacement of the line...much cheaper too.

- The driveshaft will likely need to be shortened and I will need a new yoke for the trans output. My current trans used a 30 spline output, this one will be a 31. A billet piece will get the nod.

- Next is a new bellhousing from QuickTime to convert the LS style trans to my archaic engine.

So that's the current plan. Since no core is needed for the trans, I'm told it would be about 2-3 weeks to build. I asked if I could visit the shop and see that process in action but I'm not sure if schedules will align.

Lastly, what does someone upgrade while their car isn't really driveable? The head unit of course! I swapped out the rock solid Alpine unit I had in and tossed in a Pioneer 4100NEX. This came from my wife's sold Lexus so rather than get low balled on it during resale, I got this into the firebird for less than $30 in parts. I reused the Axxess steering wheel control box which gave me some heartache. Turned out the wiring connector for it had the wire pinned in the wrong slot. Repinned and viola, all worked perfectly. It's strange but I'd say the sound is well improved as well. This head unit does Android Auto and a few other tricks. The look is much cleaner as well. Dare I say there was a bit of weight savings too!

__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA

Last edited by Blackbirdws6; 07-09-2018 at 05:51 PM.
Blackbirdws6 is online now   Reply With Quote
Old 05-24-2018, 10:11 AM   #207
sweetbmxrider
Meet Coordinator
 
sweetbmxrider's Avatar
 
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,339
iTrader: (12)
I like that list of parts and love that I don't see the bill!
__________________
sweetbmxrider is offline   Reply With Quote
Old 05-24-2018, 10:29 AM   #208
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,892
iTrader: (8)
You should hydrodip the trans.

__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline   Reply With Quote
Old 05-24-2018, 10:49 AM   #209
LS1ow
Power Member / trans break does not equal transbrake
 
LS1ow's Avatar
 
Join Date: May 2009
Location: The Meadowlands
Posts: 4,512
iTrader: (15)
Social Networks:

If there is1 thing im sure of, its that your going to spend the extra coin to cherry the trans.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
LS1ow is offline   Reply With Quote
Old 05-24-2018, 11:54 AM   #210
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
Quote:
Originally Posted by sweetbmxrider View Post
I like that list of parts and love that I don't see the bill!
And here I thought Pal Performance was finally going to become a sponsor.

Quote:
Originally Posted by LTb1ow View Post
You should hydrodip the trans.

Not bad but I'd like to see the $$ be on fire.

Quote:
Originally Posted by LS1ow View Post
If there is1 thing im sure of, its that your going to spend the extra coin to cherry the trans.
The only time I will want to see this trans is when it's flashing it's belly at Racewars.
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is online now   Reply With Quote
Old 05-25-2018, 06:37 PM   #211
IROCZman15
10 Second Club / Meet Coordinator
 
IROCZman15's Avatar
 
Join Date: Dec 2004
Location: Roxbury, NJ
Posts: 2,100
iTrader: (8)
whew, that sounds like a good (but expensive) trans setup. hopefully there isnt too much internal damage. a shortened 5th gear sounds like a good plan. keep us updated!
__________________
1987 IROC-Z - modified

IROCZman15 is offline   Reply With Quote
Old 05-25-2018, 08:09 PM   #212
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
Quote:
Originally Posted by IROCZman15 View Post
whew, that sounds like a good (but expensive) trans setup. hopefully there isnt too much internal damage. a shortened 5th gear sounds like a good plan. keep us updated!
Yes my wallet will be lit on fire come Tuesday but I seem to have to pay a lot to play.

I don't think the current trans is hurt that bad. I expect maybe a shift fork and some synchro replacement will be the main items. I doubt the major hard parts are damaged but we will see once I dissect it.
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is online now   Reply With Quote
Old 05-26-2018, 02:42 AM   #213
ThoR294
^^^Lover of bad cars^^^ Meet Coordinator
 
Join Date: Aug 2007
Location: Whitehouse Station
Posts: 2,244
iTrader: (1)
I love the parts list as well.

So wait monster makes a clutch for our cars? That's nice to know.

Cheaper to just get a new driveshaft or it's reasonable to change it up like that?
__________________
1986 Honda VFR750 - 89.3HP to the wheel
2000 Trans Am M6 - Mods: Yes.
2018 Durango R/T - AFE Intake, JLT Catch Can, Stainless Works Catback, Vinyl Dodge Racing Stripes
2003 Toyota Matrix XRS M6 - Lol
ThoR294 is offline   Reply With Quote
Old 05-26-2018, 07:24 AM   #214
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
Quote:
Originally Posted by ThoR294 View Post
I love the parts list as well.

So wait monster makes a clutch for our cars? That's nice to know.

Cheaper to just get a new driveshaft or it's reasonable to change it up like that?
Monster doesn't make a clutch for our cars. I'm converting to essentially a LS style drivetrain from the bell to the trans. The clutch fork will be gone and replaced with the internal slave. The only change to the clutch will be the flywheel.

As for driveshaft, once we measure it all and see if a change is needed, I will see what a new one costs vs shortening the one I have. Most folks who have a S60 already have a new shaft since they need it so I'm not sure how well it would resell.
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is online now   Reply With Quote
Old 05-28-2018, 10:13 AM   #215
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
So this weekend was generally productive. On Saturday. the car was put in the air to fix the bent drivers side LCA relocation bracket, realign the rear and remove the trans. Maybe the clutch and bellhousing depending on time.



Rear LCA relocation bracket out. I'd say that was a bit bent. I replaced both sides just to make sure everything was in good order. Measured, measured and measured so everything should be nice, straight and centered. Took me what felt like forever but I'm relieved that's all that got wrecked with the suspension. It was also a good reminder to go through a nut/bolt check. I noticed a few attachment points to be not loose but not tight either.




Next was the trans. No real progress pics here. Just out! Everything went pretty smoothly, almost as if it's been done before.... I'm happy with myself for not laying down a thick bead of RTV for the shifter base plate. It popped off pretty nicely. I used an assortment of lengthy extensions to grab the top bolts on the trans. Overall, time consuming but not horrendous. I had it out in about 2.5-3hrs. Again, really pleased I went with quick disconnects for the trans fluid lines. I think maybe a couple drops trickled out on the initial yank but that was it. I was pretty surprised to notice the Y-pipe I painted with high temp black paint a couple seasons ago has returned to it's natural color. Everything was cleaned and prepped so am I to assume heat burned it off? I may wrap the pope later on. As for the trans, there is not much to look at but the input shaft tip looked perfect but lateral slop in the input felt def "out of spec".

Pictured below - That could be trans fluid or blood.... My hands must be baby soft as I managed to remove quick a bit of skin even with gloves on.




New radio still looks good!



The last schlepping of the trans off the trans jack to the dolly properly tired me out so I was done for the day. I honestly couldn't believe how filthy. I threw out my shirt and took a very long shower.

Sunday arrived and it was time to get the bell and clutch out. Everything was going well until I hit the two upper bolts on both sides of the tunnel. I recall the install happening with the engine in the car but I'm not quite sure how we did it. No tool I had would get to the allen head bolts. Sockets and even an allen wrench were too long. I tried a bit of prying to angle the engine back to get something on but no luck. Ginger anger ensued. Out came the cutoff wheel (thanks Adam) and I shorted both the allen wrench and the socket with the allen. I didn't bother measuring and just hacked away. To my surprise, my modified tools were able to get the job done and out came the bell.

Next came the clutch. Feeling the end of the effort ahead, this thankfully went super smooth. My cordless impact (Thanks again Adam) made quick work of the flywheel bolts and it was done. The clutch looks worse than it really is. The metal surfaces can be cleaned up and the discs show a good amount of material remaining. I showed my Dad and immediately blamed him for the hot spots likely caused during his 1.4x 60' pass .








So that's it for now. The clutch and bell are for sale. Once I see what's up with the current trans, that will be for sale as well.

Time to order new parts.....
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is online now   Reply With Quote
Old 05-28-2018, 05:31 PM   #216
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,892
iTrader: (8)
I have 25ft of DEI wrap in the garage I am not using if you wan to wrap the Y
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline   Reply With Quote
Old 05-28-2018, 06:24 PM   #217
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
Quote:
Originally Posted by LTb1ow View Post
I have 25ft of DEI wrap in the garage I am not using if you wan to wrap the Y
Sweet. I will take you up on that.
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is online now   Reply With Quote
Old 05-28-2018, 08:06 PM   #218
sweetbmxrider
Meet Coordinator
 
sweetbmxrider's Avatar
 
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,339
iTrader: (12)
Excellent work, sirs.
__________________
sweetbmxrider is offline   Reply With Quote
Old 05-28-2018, 10:09 PM   #219
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
Quote:
Originally Posted by sweetbmxrider View Post
Excellent work, sirs.
See that's the funny thing about assumptions.
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is online now   Reply With Quote
Old 05-29-2018, 05:04 AM   #220
Jersey Mike
Power Member/NJFBOA Bookie/Moderator
 
Jersey Mike's Avatar
 
Join Date: Jun 2009
Location: North Jersey = Best Jersey.
Posts: 4,435
iTrader: (12)
Social Networks:

Good stuff. Kudos for tackling this on your back! You're a better man than me... I held off until I had access to a lift Hopefully this motivation means you won't miss too much of the season.
__________________

1995 Firebird... Stock-ish.
Quote:
Originally Posted by LS1ow View Post
Good. He microwaved my phone 6 years ago, i hope his intake erupts.
Jersey Mike is offline   Reply With Quote
Old 05-29-2018, 06:42 AM   #221
ThoR294
^^^Lover of bad cars^^^ Meet Coordinator
 
Join Date: Aug 2007
Location: Whitehouse Station
Posts: 2,244
iTrader: (1)
Quote:
Originally Posted by Jersey Mike View Post
Good stuff. Kudos for tackling this on your back! You're a better man than me... I held off until I had access to a lift Hopefully this motivation means you won't miss too much of the season.
its not that bad of a job, just need really long extensions and an impact gun. hell i did it on stones in my parents driveway.
__________________
1986 Honda VFR750 - 89.3HP to the wheel
2000 Trans Am M6 - Mods: Yes.
2018 Durango R/T - AFE Intake, JLT Catch Can, Stainless Works Catback, Vinyl Dodge Racing Stripes
2003 Toyota Matrix XRS M6 - Lol
ThoR294 is offline   Reply With Quote
Old 05-29-2018, 07:17 AM   #222
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
Quote:
Originally Posted by Jersey Mike View Post
Good stuff. Kudos for tackling this on your back! You're a better man than me... I held off until I had access to a lift Hopefully this motivation means you won't miss too much of the season.
I had access to a lift but decided doing it at the house was a better situation for multiple parties. The reinstall will be done on a lift. I'm sure the car will be ready in the hottest of weather but it can't be helped if I want to drive it around before the fall/winter.
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is online now   Reply With Quote
Old 05-29-2018, 07:45 AM   #223
sweetbmxrider
Meet Coordinator
 
sweetbmxrider's Avatar
 
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,339
iTrader: (12)
Quote:
Originally Posted by Blackbirdws6 View Post
See that's the funny thing about assumptions.
Just showing my respects for dat X5R, sir.
__________________
sweetbmxrider is offline   Reply With Quote
Old 05-29-2018, 08:03 AM   #224
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,892
iTrader: (8)
Quote:
Originally Posted by ThoR294 View Post
its not that bad of a job, just need really long extensions and an impact gun. hell i did it on stones in my parents driveway.
Quote:
Originally Posted by ThoR294 View Post
Idk how to word it. I want to jack up the car and put weight back on the wheels. I see some ramps on Amazon but they have bad reviews. I figured I can just jack up each corner then rest the wheels on something. Do I just get some wood and place it under the wheels?

What do you guys do?
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline   Reply With Quote
Old 05-29-2018, 08:15 AM   #225
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
Quote:
Originally Posted by ThoR294 View Post
its not that bad of a job, just need really long extensions and an impact gun. hell i did it on stones in my parents driveway.
I did enjoy an extension taking a good shot at my head but you brave taking an impact to super long extensions for bell to trans bolts. The work isn't hard but don't read that as I think I'm any good at this. If I worked on cars for a living, I'd lose my a$$ on every job.

Quote:
Originally Posted by sweetbmxrider View Post
Just showing my respects for dat X5R, sir.
WE know what you meant and FYI, the only step where assistance was needed/requested is getting the trans off the trans jack to the dolly.
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is online now   Reply With Quote
Reply

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Camaros, Firebirds and the People that own them > Member's Rides > The Later Years 93-present

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 03:51 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.