New Machine Shop Opened !!!!

[jrsfast84]

Me (JR Newman) & My Engine builder have opened a Bigger Machine Shop, Call " Homer Racing Engines ", we can do any type of machining, flow bench (heads), from stock to Wild, we are located in Easton,PA, were looking to get work, and we are very reasonable, and we will work with everyone, i been doing it for 7yrs, my engine builders been doing it for 30yrs. e-mail me, pm's. Thanks.

[foff667]

you guys gonna do an ls1/ls2 stuff?

[jrsfast84]

you guys gonna do an ls1/ls2 stuff?
what do you need done. JR.

[foff667]

just asking what you are willing to do just for referal sake...heads, rebuilds, whatever really...just would be nice to know what you guys will be working on since theres not many ls1 machine shops in the area.

[jrsfast84]

sure we will do them, not a problem. just let me know. JR

[jrsfast84]

do you think you 's could make this a sticky for a couple of days or a week, that would be great. JR.

[Koll]

YGPM

[ShitOnWheels]

do you think you 's could make this a sticky for a couple of days or a week, that would be great. JR.
There aren't any admins around. Justin and Tim are both away.

[Tru2Chevy]

There aren't any admins around. Justin and Tim are both away.

True, but the hotel has free wireless internet ;)

Good luck with it JR!

- Justin

[jrsfast84]

Thanks, Justin for making a sticky. JR.

[Ian]

wow, thats awesome! I'm glad to hear you have something going for ya after you lost your job. If I need any machine work done, you're at the top of the list. :)

[qwikz28]

this is odd... i was thinking last nite to post up if anyone knew of anyone who did good head work for reference sake. congrads on the shop and i wish you the best of luck.

ps- you should post some contact info and bring cards to the meets and stuff for members like us to distribute

[jims69camaro]

time to get cracking on this 400. you've got a PM.

yeah, company name and contact info would be cool to pass along to others.

[jrsfast84]

Info. for New Shop coming soon. thanks. JR.

[2001orangess]

can you fix my car :(

[jrsfast84]

can you fix my car :(
what wrong with it. JR

[Mike]

hmm if you get into lt1/ls1/ls2 business good, and set somthing up with bill as your tuner once the motors are done.....lil ole njfboa could be the breeding ground of a sucessfull tuning business.......

goodluck

[Ian]

what wrong with it. JR

#7 cylinder is very low when performing a compression test. At least, thats the last thing I heard.

[2001orangess]

#7 cylinder is very low when performing a compression test. At least, thats the last thing I heard.

yup, that;s what wrong with it. i did a compression test and every other cylinder was in the 150-160ish range, but cylinder 7 was i think 35. pm me if you can work on it

[slasherbarb]

i take it you do porting jobs? If so, about how much are we looking for on a full port job on an LT1 intake? Full job as in fully ported and ready for a 58 mm TB

[jrsfast84]

i take it you do porting jobs? If so, about how much are we looking for on a full port job on an LT1 intake? Full job as in fully ported and ready for a 58 mm TB
are the heads ported,if they are, we can match the intake gaskets and fully port the manifold for you, no problem,if heads are not ported we could work something out. give me a day, what yr. manifold or car is it.i'll get back to you., just finished up a full port job on a 4.6 ford w/a supercharger,heads lower intake,and upper intake, should make close to 500hp rwd. JR1.

[jrsfast84]

just to let everyone know that, Feb. 1st. looking to be in new building and hopefully going from there. with an Address,Phone #'s, sorry if i was too high on some prices for people, plus right now we're every busy refreshing motors, for past customers, which we do over the winter only, but we're willing to help everyone, at anytime. JR1.

[camaroracer1992]

wonder how much magic you could work on my motor but keep it pump gas friendly hmmm

[jrsfast84]

wonder how much magic you could work on my motor but keep it pump gas friendly hmmm
heads, and other tricks, let me know. we could talk about. JR.

[V]

can you give me a rough idea of a price to do a .030" bore and install cam bearings on a brand new LQ4 block? it doesnt have to be an exact estimate just an idea, i wont hold you to it.

[jrsfast84]

wonder how much magic you could work on my motor but keep it pump gas friendly hmmm
forgot to ask you, what heads do you have and a manifold. maybe pm me i'll call you sat. Thanks. JR.

[jrsfast84]

can you give me a rough idea of a price to do a .030" bore and install cam bearings on a brand new LQ4 block? it doesnt have to be an exact estimate just an idea, i wont hold you to it.
Do you have the piston your going to be using, we like to bore & hone with the piston. thanks. JR.

[V]

yes id have the pistons at the time, i just havent bought the rotating assembly yet

[jrsfast84]

yes id have the pistons at the time, i just havent bought the rotating assembly yet good, i'll say my builder for breakfest at 7am, i'll get one for you. i'll PM you.thanks. JR.

[camaroracer1992]

i have brodix race ready 180's with cnc work on them (optioned fully from brodix) and i run the edelbrock pro flo 1000cmf system efi. im looking for an "upgrade" at the end of the season

[TheWraith]

give me your contact info for the business - send to thewraith@techcessive.com. I'm in allentown, and i'm always looking for someone to do machining for me. I actually could have brought you some simple stuff today even.

I work with a bunch of car guys too, and i have a huge circle of friends who are into cars (tons of thirdgen people), so if you do good work, I can definitely make recommendations.

[jrsfast84]

give me your contact info for the business - send to thewraith@techcessive.com. I'm in allentown, and i'm always looking for someone to do machining for me. I actually could have brought you some simple stuff today even.

I work with a bunch of car guys too, and i have a huge circle of friends who are into cars (tons of thirdgen people), so if you do good work, I can definitely make recommendations.
well for right now we are on union blvd. call Glen's Car Care. only at night after 6pm. look for white enclosed trailer says Homer Racing on it.(till we move to easton off of 10th st. on Northampton St. starting soon.) stop in, we could chat. or call me (610)597-6459. JR.

[jrsfast84]

i have brodix race ready 180's with cnc work on them (optioned fully from brodix) and i run the edelbrock pro flo 1000cmf system efi. im looking for an "upgrade" at the end of the season
well we would flow them and go from there, but maybe you would want to get a different set by then,that flow more, but if we were to work on them we could get them better. could you PM me some motor specs. cam sizes, what gears,converter, just to get an idea. thanks. JR.

[jims69camaro]

time to get cracking on this 400. you've got a PM.


since i seem to have gotten lost in the shuffle, how about an idea what it will cost to clean the block up and i'll start looking for a rotating assembly?

[jrsfast84]

since i seem to have gotten lost in the shuffle, how about an idea what it will cost to clean the block up and i'll start looking for a rotating assembly?
I didn't forget you, there were 9 people who need info., and i'm so busy working from 6:30am till 11pm every night, i just need an hour i'll get back to you before friday, i'll PM you. thanks. JR.

[jrsfast84]

i take it you do porting jobs? If so, about how much are we looking for on a full port job on an LT1 intake? Full job as in fully ported and ready for a 58 mm TB
do you have the manifold ready to be ported, its hard to match manifold to heads without have the heads, but PM me let me know,mite have to look at manifold, and go from there. JR.

[jrsfast84]

yes id have the pistons at the time, i just havent bought the rotating assembly yet
what's the block from,and what year. PM me with the info. thanks. JR.

[jrsfast84]

well for right now we are on union blvd. call Glen's Car Care. only at night after 6pm. look for white enclosed trailer says Homer Racing on it.(till we move to easton off of 10th st. on Northampton St. starting soon.) stop in, we could chat. or call me (610)597-6459. JR.
Off airport road south to union blvd. turn left at wawa,is about 1/2 miles or so on left, White 30ft enclosed trailer, HOMER RACING on side thats it. after 6pm.thanks. call me if you plan to stop.thanks. JR.

[V]

what's the block from,and what year. PM me with the info. thanks. JR.
its a iron 6.0l block, i believe around 2002, LQ4 engine. its brand new, never machined or assembled.

[jrsfast84]

its a iron 6.0l block, i believe around 2002, LQ4 engine. its brand new, never machined or assembled.
do you want to bore,hone w/plate,align hone,install cam bearings,are you going to balance the assembly. JR.

[V]

yeah all that and i guess i might as well have it balanced at the same time while its all there