Are DSM's easy to work on?

[Squirrel]

been thinkin about pickin one up when i sell the TA...i know about all their common problems and such, but how long do spark plug changes take? etc. etc....anyone ever own one?

[enRo]

I think Tsar owned one at some point... and in my opinion, DSM's are the easiest and cheapest to mod and make 11 second cars.

[project89]

easy to work on.i almost bought one the other day.theres a mint 95 turbo talon awd here a few blocks from my house.looked already to have a upgraded turbo and fmic,along with some other stuff.guy wants 4,200. if ur looking for one pm me and ill give ya directions.unless ya already found one lol

as far as common problems the transmissions arent that good

[Ian]

plug changes would be pretty easy considering they go in through the top of the head.

[GP99GT]

yeah theyre pretty easy to work on. respond well to mods as well. common problems are timing belt - CHANGE IT EVERY 60K! transmissions, the first gens had problems with the synchros, making it grind the 1-2 and 2-3 shifts usually. general maintenance stuff is easy to do. other than that stuff they are actually fairly reliable if you take care of it.

[Squirrel]

i figure ill buy one and throw a couple hundred at it, run 12's and be satisfied for a while, while gettin 25mpg lol

[Squirrel]

if anyone knows of any for sale, let me know, the closer to stock the better...i actually prefer 1g's but a 2g is fine

[project89]

do u want the guys phone number of the one buy me?i didnt get a chance to talk with him i just had a chance to look at walk around the car.looks well cared for

[Savage_Messiah]

You know you dont wanna sell the TA...

[GP99GT]

oh and get a 1g. 90-92 6 bolt motor FTW, the later years have the 7 bolt which makes more power but can crankwalk.

3" turboback exhaust
2g ported exhaust manifold
all the free mods
manual boost controller (and supporting fuel mods)

and youll be running pretty quick. Also see if you can find a 92 with the 4 bolt rear, 90-early 92 have the weaker 3 bolt. very hard to find a 6 bolt motor/4 bolt rear combo car.

[Koll]

See Crank walk. Walk Crank walk.

[Squirrel]

You know you dont wanna sell the TA...
i want something smaller, easier to work on, and still have some go juice...of course i wanna keep the TA but idk...eh

[Tsar]

See Crank walk. Walk Crank walk.
:roll: in years that ive been arounf DSM i've yet to meet ONE person who had an actually crankwalk... but hey i hear on the interweb its quite the problem. Ohh BTW crankwalk is not dsm only thing, sure it happens in 2gs 7bolt more of then then not but even almighty MKIV has that problem. :laugh:

Um...what gen dsm are u gonna buy? they are easy to work on, certainly much better then an LT1 especially when it comes to plugs. it will take you like a whooping <2 minutes to change them. 6bolt engine and 4 bolt rear seems to be the favorite among the peeps but they come pre 92.5 in a package that is. u can of course find them separate. If some one claims that they have a 6 bolt there's an easy way to check, look under the car and see if the oil pan is indented on the side its not a 6 bolt...

As far as tranny goes, if u beat on it it will break especially AWD :laugh:. easy but expensive solution is Shep tanny. Mods are pretty easy to do if you have half a brain. DSM own all. thats it.


ohh and ill give another :rofl: at the crankwalk peeps

[GP99GT]

http://img327.imageshack.us/img327/6662/crankwalk34sa.jpg :lol:

[Tsar]

someone posted that on tooners ages ago...

[GP99GT]

i know, its a very old picture. but i felt it was appropriate

[Squirrel]

Um...what gen dsm are u gonna buy?
either would be fine, im just trying to find one that isnt beat to **** or a car with huge mods and problems...its like trying to find a clean notch

[12secondv6]

http://img327.imageshack.us/img327/6662/crankwalk34sa.jpg :lol:
:laugh: :laugh:

You could always install a 2JZ?

[NJSPEEDER]

before my bro got rid of his car i read a lot about them overcoming the crank walk issues by eliminating the counter shafts. something about they were trying to turn more mass than the bearings were capable of centering against.

basic maintenance isn't too bad on them. everything is pretty much within reach. doing clutches on AWD cars is a gigantic pain in the ass and rather pricey to have a shop do because of the time invovled.

[shane27]

i had a first gen TSI AWD not to long ago, had a few minor belt issues when i first got it which were later resolved with the help of GP99GT.

also i let this kid drive it once, he over reved it a few times and bent the valves cuz hes an effing idiot. my auto shop class and i took about 2 months and 300 bucks but we finally got her running again.

the engine had about 30k give or take a few thousand and ran really good, the body had 173,xxx and i never had to replace anything body wise...except for a few PS/WP belts :laugh:.

the trans wasnt great, but then again i wasnt the best 5spd driver either. overall it was a good car and decently easy to work on, i guess thats one of the advantages to DOHC.

i bought a turbo back buschur racing exhaust off of NJSPEEDER which

edit: my avatar says R.I.P cuz it got hit by a truck :-x:?

[GP99GT]

yeah the alternator is the tensioner basically cause it has seperate belts for each accessory. and its a bitch to tension the belt but of course every time we were wrenching on it it was like 45 degrees and dark outside :lol:

and yeah dont over-rev it. interference motor FTL

edit: and oh yeah, shanes car hung with a stock LS1 trans am (automatic) up to about 80mph. all shane had was a turboback exhaust and free mods

[Squirrel]

yeah, i know im not gonna find a clean notch so i figure a turbo matchbox car would be fun :p

[project89]

want a twin turbo 3rdgen instead? lmfao

[Tsar]

want a twin turbo 3rdgen instead? lmfao
sadly i think a dsm will be more reliable :lol:

[project89]

lol yeah ur right but twin turbo 3rdgen > talon
heh if only had a single turbo on for a short time now,and i think ive ended up spending more time fixing it then driving it

[Tsar]

lol yeah ur right but twin turbo 3rdgen > talon

depends what kinda dsm

[Squirrel]

want a twin turbo 3rdgen instead? lmfao
lol good one..

well...unless you have a TTA youre not telling anyone about :)

[project89]

nope just whats in my sig

[LT!freak94]

well if your interested i got a 93 eclipse 5speed it grinds a very little goin into second ther then that has not a single problem that i know of its got a ebay intake and brand new exhaust from header back done at minikie like a month and a half ago i still got the riciept or how ever you spell that its got a 6 bolt in it its fwd and i know were you can get a doner car awd with out the turbo for 600 i want at least 3000 for mine the body has 94 thou on its and the motor has about 26 thou on it the tranny has the same as body no rust 2 dents in front left fender other then thats its a real reliable car

[Squirrel]

how far away is b-mills from ewing?

[Tru2Chevy]

:google: says about 1 hour....

Map (http://maps.google.com/maps?f=d&hl=en&saddr=bear+tavern+road,+ewing,+nj&daddr=browns+mills,+nj&ll=40.325608,-74.705658&spn=0.558029,1.112366&om=1)

- Justin

[LT!freak94]

if your anywere near paterson i could drive the car up their and set up a meetin spot orsomethin i could meet you half way i am drivin the car right now

[Tru2Chevy]

if your anywere near paterson i could drive the car up their and set up a meetin spot orsomethin i could meet you half way i am drivin the car right now

See "Map" in the post above yours to know about where he lives....Ewing is just outside of Trenton

- Justin

[Squirrel]

if your anywere near paterson i could drive the car up their and set up a meetin spot orsomethin i could meet you half way i am drivin the car right now
i have no clue what paterson is but ill let ya know when i got a free day

[Savage_Messiah]

you dont know p-town nukka?!?!

[Squirrel]

you dont know p-town nukka?!?!
neg...sounds like a ****** place to be:)