Log in

View Full Version : A/F gauge problem

GP99GT
08-08-2006, 07:42 AM
i didnt know which forum this should be under, so ill just post it here. Just got an autometer A/F gauge from another forum. went and hooked it up, having a bit of a problem...gauge reads full lean, and the car will start running like it has a vacuum line pulled off and will stall. If i unhook the gauge again, it runs perfect. I can leave the signal wire connected and it runs fine, but as soon as a connect the power wire, it starts to run like ****. any ideas?
Tru2Chevy
08-08-2006, 08:52 AM
Are you 100% sure that you have it wired up correctly?

- Justin
WildBillyT
08-08-2006, 09:15 AM
Are you 100% sure that you have it wired up correctly?

- Justin

I agree. It sounds like you are sending power over the signal wire or something like that.

Is this in your GP? Are you using the A/F pigtail?
GP99GT
08-08-2006, 09:54 AM
99.9% sure its wired correctly, red wire to positive, black to ground, and the signal wire to the purple wire off the O2 sensor. not using the pigtail, used a scotch connector to connect to the wire so i didnt have to cut it.
WildBillyT
08-08-2006, 10:01 AM
Do you have a good ground (i.e is it grounded to something unpainted, with a star washer, etc)?
GP99GT
08-08-2006, 10:32 AM
Do you have a good ground (i.e is it grounded to something unpainted, with a star washer, etc)?

yep. i even tried taking it out of the pod and connecting it directly to the battery, same thing happens. maybe something came loose inside the gauge itself and is shorting on the signal wire?
project89
08-08-2006, 10:56 AM
the gauge is shot,but just to be sure unhook the signal wire fromth eo2 sensor.and prob the wire with a volt meter.if there is voltage at the signal wire the gauge is no good.

i had this problem with myold a/f gauge.took me a whole dam day to figure it out.and probably wouldnt have it if wasnt for kasey lol
GP99GT
08-08-2006, 02:50 PM
just tested it with a multimeter. 29mV on the signal wire, i guess thats enough to throw it off. is it possible to take these gauges apart? i could send it back to autometer for repair but i didnt pay much for the gauge to begin with, so its not really worth it
WildBillyT
08-08-2006, 02:53 PM
I've got a new sport comp gauge, cup, and pigtail that I could part with if you are interested... I was going to put it in my GTP but I've got no room. None of the stuff has been used, just taken out of the packaging.
GP99GT
08-08-2006, 03:04 PM
how much ya want for it? im cheap :lol: and i have various GP parts you might want in trade too
WildBillyT
08-08-2006, 07:48 PM
Well, the original prices of the stuff are:

From Summit:
Autometer Sport Comp 2 1/16 AF gauge- 51.88
Autometer 2 1/16 gauge cup - 12.95

From ZZP:
Casper's AF gauge pigtail - 15.00

So the original prices total 79.83 without shipping.

Everything is brand new but out of package. You can have it all for $60 shipped or if you've got other GP parts, let me know what you have. I may be intrested.
Tru2Chevy
08-09-2006, 11:13 AM
Matt, did you try letting the person you bought it from know that the gauge is messed up? You might have an honest seller that will give your money back....

- Justin
GP99GT
08-09-2006, 11:16 AM
Matt, did you try letting the person you bought it from know that the gauge is messed up? You might have an honest seller that will give your money back....

- Justin

yeah i sent him a PM on clubgp, still waiting for one back