iron block in a gen 4 LSX

[the big kahuna]

I wanted to ask if any one could tell me if I stuck a iron block LS6.0 in my 98 Z28 how will it handal ok the same or bad i know the 93to97s have a iron lt1 so I would think it would be good im toying with the idea of doing that

[j0n]

i'd imagine you may want to get some qa1 springs designed for an lt1 car

[98tadriver]

i'd imagine you may want to get some qa1 springs designed for an lt1 car

i have brand new 275lb "drag" springs from QA1. i paid 100 for em never used em. sell em to ya cheap. you would also need QA1 coilovers to go with the springs, if u dont have them already

[the big kahuna]

i have brand new 275lb "drag" springs from QA1. i paid 100 for em never used em. sell em to ya cheap. you would also need QA1 coilovers to go with the springs, if u dont have them already
no thanks im a stock sup guy maby a set of factory lt1 springs i geuss ill see how it sits thanks for the input

[Batman]

If you re-locate your battery you will hardly notice the difference. It will nose-dive a little more with stock springs, but it isn't too bad.

[ins0mnia24]

The stock front springs on V8 4th gens was the same from 93-02
(51 N/mm, 292 lbs/in) gm# 22077197
Same with the rear springs (19.9 N/mm, 114 lbs/in) gm#22077421 were the same from 93-02 the v6's from 98-02 also used the same rear spring.
Same with all the 4th gen SS,WS.6 and 1LE's used the same
Front (360 lbs/in) spring rates and Rear (130-170 lbs/in) springs

The front shocks were different or they atleast have different part numbers but i don't know what may be different about them except for part numbers.

[1984camaroz28]

you will not even notice it