trans problems

[camaromike95]

i have a 95 z28 camaro with a t56 trans, so i was driving back from work taking it easy on it when i shifted into forth and rolled to a stop light it was stuck in 4th gear and wouldnt come out without real force to it and now everytime i drive it third doesnt go in it jus pops out and 4th grinds real bad. any1 have any ideas what it could be??

[JSPERFORMANCE]

Sounds like either the shift fork wear pads are worn out or the fork is bent.

[sweetbmxrider]

sorry to throw this thread off topic, but nice car! what is done to it?

[camaromike95]

Sounds like either the shift fork wear pads are worn out or the fork is bent.

Is that an easy fix. Im not to familiar with t56s.

[camaromike95]

sorry to throw this thread off topic, but nice car! what is done to it?

and its a stock corvette motor outta a 93 vette with brand new bearings and gaskets, full exhaust, and nitrous

[JSPERFORMANCE]

basiclly the trans is probably going to need a rebuild. Wouldnt make sense to remove the trans and dissasemble it to just replace 1 or 2 parts...

[camaromike95]

basiclly the trans is probably going to need a rebuild. Wouldnt make sense to remove the trans and dissasemble it to just replace 1 or 2 parts...

could u send me a price to get that rebuilt

[JSPERFORMANCE]

Basic rebuild starts at around $750 and it goes from there depending on upgrades you may choose to do and the amount of damage to hard parts..

[NJSPEEDER]

I have a rebuilt trans and custom clutch from Josh. Top notch stuff, fair price, and the work got done quickly.