PDA

View Full Version : Underside of door rusted to hell...

_87TA_
05-09-2010, 02:29 PM
Like usual my doors were sagging so I fixed them. Then I notice, from them sagging for so long and me and previous owner constantly slamming the door to get it shut, the ground effects weren't really attached:
http://img121.imageshack.us/img121/5605/img1139vk.th.jpg (http://img121.imageshack.us/i/img1139vk.jpg/)http://img710.imageshack.us/img710/4438/img1138l.th.jpg (http://img710.imageshack.us/i/img1138l.jpg/)
And I also notice some scratching on the door sill:
http://img686.imageshack.us/img686/5871/img1127m.th.jpg (http://img686.imageshack.us/i/img1127m.jpg/)
So I look underneath and what do I see?
http://img340.imageshack.us/img340/1387/underdoorpanorama.th.jpg (http://img340.imageshack.us/i/underdoorpanorama.jpg/)

Made a panorama of it... :D

My original plan to fix the GFX was to just re mount it... but since this came up, I can't decide to either replace whole door or attempt to fix it.
Does any one else have any suggestions?
see poll.
Thanks.
NastyEllEssWon
05-09-2010, 03:30 PM
get yourself a new door or at least some door hinge pins. it wont sag like that.
BonzoHansen
05-09-2010, 03:42 PM
I have a nice RH door for you, $40!
_87TA_
05-09-2010, 04:56 PM
get yourself a new door or at least some door hinge pins. it wont sag like that.

I already replaced the hinges. The damage is from before. It 'stretched' out the metal.

I have a nice RH door for you, $40!

It's driver side....
deadtrend1
05-09-2010, 10:38 PM
It's driver side....

If Bonzo doesn't have one, I do
V
05-10-2010, 08:24 AM
yea, dont waste ur time trying to fix it... just replace.
Mark42
05-10-2010, 08:55 AM
With that kind of rust on the door, I bet there are rust issues in other places. Do a full assessment of the frame and chassis and determine if its worth fixing before spending any money on it.
V
05-10-2010, 10:36 AM
With that kind of rust on the door, I bet there are rust issues in other places. Do a full assessment of the frame and chassis and determine if its worth fixing before spending any money on it.


the frame rust is the worst on these cars
sweetbmxrider
05-10-2010, 11:54 AM
i hate unibody frame rust :-x

i'd throw on a door
Tru2Chevy
05-10-2010, 06:05 PM
With that kind of rust on the door, I bet there are rust issues in other places. Do a full assessment of the frame and chassis and determine if its worth fixing before spending any money on it.

Actually, it's highly likely that there is little to no rust on the rest of the car (aside from what is pictured) if it was cared for halfway decent. If you read the first post, you'll know that this was caused by the door actually rubbing on the door sill due to sagging hinges. It'll obviously rust much faster when you scrape it down to bare metal.

- Justin
The Fixer
05-11-2010, 12:28 PM
I agree, time for a new door. It'll be cheaper than trying to fix the rust, that's for sure. The passenger front door on my Cherokee was rotted from the inside out, so I scored one at a junkyard in the same color as my truck. Bolted it on, and didn't even need to paint it!
TheV6Guy
05-11-2010, 12:30 PM
replace the door.