zraffz
12-23-2012, 05:42 PM
Looking for the fuel injection setup off a 1990-1992 Camaro or Firebird with a TPI 305 or 350. Will take a totaled car/seized motor/trans/rear car for the right price.
Looking to convert a carbed motor to TPI so otherwise I will need the following parts:
TPI Upper/Lower Intake + Runners
Throttle Body
Fuel Rails & Injectors
TPS Sensor
MAP Sensor (Not interested in a MAF setup TPI motor)
Wiring Harness
IAC, Coolant Temp Sensor, Intake Air Temp Sensor, Knock Sensor
ECM
PROM/MEMCAL
I can do without some of the parts (upper/lower intake/runners, fuel rail & injectors and various sensors but the biggest thing is the harness and ecm/prom need to be for a MAP TPI motor - upgrading the manifold/fuel rails anyway).
Looking to convert a carbed motor to TPI so otherwise I will need the following parts:
TPI Upper/Lower Intake + Runners
Throttle Body
Fuel Rails & Injectors
TPS Sensor
MAP Sensor (Not interested in a MAF setup TPI motor)
Wiring Harness
IAC, Coolant Temp Sensor, Intake Air Temp Sensor, Knock Sensor
ECM
PROM/MEMCAL
I can do without some of the parts (upper/lower intake/runners, fuel rail & injectors and various sensors but the biggest thing is the harness and ecm/prom need to be for a MAP TPI motor - upgrading the manifold/fuel rails anyway).