84 Trans Am conversion/mod

[Punkmaster 98]

Another one of my projects that i have going on. This is the second of the three thirdgens I own. Im converting it to an 84 exterior cause i personally thats my favorite looking. Though many dont approve Im using this 87 GTA :facepalm: as my start point cause i received on a trade as a gutted shell.

https://lh3.googleusercontent.com/-TIsDfbmBQ_0/VEAUm0N3zZI/AAAAAAAAIm4/yS3Nh-mwYxk/w751-h563-no/20141016_144836.jpg

[Punkmaster 98]

This is the end result im going for. but with a nice powerplant and a manual transmission.

https://lh5.googleusercontent.com/-aK0b8sWlfM0/VT15-mb98BI/AAAAAAAAKi4/6S8BwJ7pUe0/w751-h563-no/ta_0029_LG.jpg

[Punkmaster 98]

Previous owner put some sort of rubberized coating on the interior so i will leave it alone for the time being. the body for the most part is straight. and relatively rust free. Im gonna be using Tan gta interior plastics and 84 recaro seats.

https://lh6.googleusercontent.com/-o0yetW4Mnzs/VFMKlw1V9TI/AAAAAAAAIvo/BRz_nGaqNok/w998-h563-no/2014-10-30_16-49-34_1

https://lh4.googleusercontent.com/-S9T9BGOgZkk/VEHmpM_oHbI/AAAAAAAAInY/f8ARMXufTk4/w422-h563-no/IMG_6671.JPG

[1320B4U]

Nice job so far john. The recaro seats will be a pretty penny to get redone but worth it.

[greenformula92]

I could only complain about you using that car if it was all there and a 350 car. But since its gutted already its a perfect start for a new build. So I say build a way. Should be real nice when its done

[Punkmaster 98]

Gonna go a different route with my spoiler and use this shorted wrap around made by wings west. A lot cheaper than a brand new full size one too.
https://lh6.googleusercontent.com/--UvorfKsIUE/VPdbHZc8oLI/AAAAAAAAKMk/NzNy8YxRLu0/w422-h563-no/20150304_141036.jpg
https://lh6.googleusercontent.com/-XxrdOQVetn0/VPdbIWEYSjI/AAAAAAAAKMs/wrD9ETnZXbg/w422-h563-no/20150304_141318.jpg

[Punkmaster 98]

Finally got an 82-84 nose that is an excellent shape. Took me forever to find an OEM one.
Anyone know the best way to remove the factory decals?

https://lh6.googleusercontent.com/-UmOhcN6wM00/VT1wp1v-0hI/AAAAAAAAKiE/lUr43MaQxAs/w998-h563-no/2015-04-25_17-45-13_511.jpg

Font end is almost completely stripped for blasting.
https://lh6.googleusercontent.com/-9-cFF-BdoaQ/VT1wpwmn_hI/AAAAAAAAKiI/D2LtBeCqmzU/w998-h563-no/2015-04-25_17-45-29_859.jpg

[NJSPEEDER]

I have never found a good way to remove stickers from urethane. Biggest thing I will say is avoid heat or anything that will put excessive heat into the material. Once it warps there is no getting it back.

You may wanna ask on Thirdgen.org. Since removing the factory graphics is a popular thing to do I'm sure someone has figured out a reasonable solution.

[BonzoHansen]

try 3m decal & woodgrain remover

http://www.amazon.com/3M-08908-Woodgrain-Adhesive-Remover/dp/B000PENLSE

[Punkmaster 98]

Engine for the GTA has been aquired. 6.0 with 65k miles. Heads rebuilt and fresh cam bearings with hone. Looking forward to putting this one together. Dont mind the green that will be the first thing to go.
https://lh3.googleusercontent.com/iFX40hZcQxfYZL4rPDRI3wefjk5_5-Wbci12HarC8xY=w528-h937-no

[Blackbirdws6]

I think the fact that you have an engine block in your passenger seat is kind of awesome. Better put on its seat belt.

[Punkmaster 98]

Seeing that I had a 6hr drive home from my job to my house in NJ there was no way i would even risk having the block go fling forward if i stopped short.

Safety First lol

https://lh3.googleusercontent.com/do6OhA8MjuDszliu7LxQSjWtixil0YZ4L0DJyIrH7i0=w960-h770-no

[Punkmaster 98]

Got my longtubes, Racing innovation 1 3/4 LS headers for thirdgens. These are a little bigger than the ones on my 92 as the others were from the first run of headers.

https://lh3.googleusercontent.com/xksKOaQ7BuwLSpb2a8tVEcCWjbI8_uHdWoDnqc_nDoM=w1024-h576-no

[Punkmaster 98]

would anyone happen to know of a reputable machine shop that i can send my crank to?

[Dudbird113]

Got windsor machine, bammann machining near ya

[IROCZman15]

nice project. quick question. Did you get that car from another board member here who may have bought it from my younger brother about 6 years ago? My brother bought an 87 GTA when he was 15 and never got it on the street because he bought a 93 Trans Am in the meantime and used that as his project. THe 87 was boogered up and slapped together by a mechanic named Mark in Hillisde or Irvington Nj and was a real pile. It was originally a red car that the guy painted black (a poor job of it) and had a grey interior which was trashed and the digital gauge setup. He claims it had a 350 in it, but it definitely DID have a 700R4 auto. The wiring was a mess allover too so my brother sold it cheap, and I want to think my memory serves me right.. that it was to a member on here of some sort... maybe If not, my bad.. but I had always been curious about that cars fate

[L695speed]

Hey John,

I have been using 3M pads to take the decals off of mine. Seems to work ok. Though I put that project on hold. Good to see you've made some progress since I saw you. I slapped the taillight into the GTA. It looks better than tape and plastic.

I do have a good question for you... WHERE ARE YOU FINDING THESE 6.0s? LOL. You need to hook me up with one. I am looking for my own car lol.

[Punkmaster 98]

nice project. quick question. Did you get that car from another board member here who may have bought it from my younger brother about 6 years ago? My brother bought an 87 GTA when he was 15 and never got it on the street because he bought a 93 Trans Am in the meantime and used that as his project. THe 87 was boogered up and slapped together by a mechanic named Mark in Hillisde or Irvington Nj and was a real pile. It was originally a red car that the guy painted black (a poor job of it) and had a grey interior which was trashed and the digital gauge setup. He claims it had a 350 in it, but it definitely DID have a 700R4 auto. The wiring was a mess allover too so my brother sold it cheap, and I want to think my memory serves me right.. that it was to a member on here of some sort... maybe If not, my bad.. but I had always been curious about that cars fate

thats interesting cause this car was originally red. When i got it from my friend down the road it had a black interior. was pretty clean actually. the wiring isnt too bad as ive hooked up a power probe to get everything to work. so far things work but the radio is hacked. My friend got it from someone in PA who frequently gets these cars.

[Punkmaster 98]

Hey John,

I have been using 3M pads to take the decals off of mine. Seems to work ok. Though I put that project on hold. Good to see you've made some progress since I saw you. I slapped the taillight into the GTA. It looks better than tape and plastic.

I do have a good question for you... WHERE ARE YOU FINDING THESE 6.0s? LOL. You need to hook me up with one. I am looking for my own car lol.

hey nice to hear from ya man. These motors are literally everywhere. there are a few locally in the junkyards as well. Im very active on some of the LS pages and TGO and these do pop up. I jumped when i saw a good deal. Let me know and ill try to help you out.

[L695speed]

hey nice to hear from ya man. These motors are literally everywhere. there are a few locally in the junkyards as well. Im very active on some of the LS pages and TGO and these do pop up. I jumped when i saw a good deal. Let me know and ill try to help you out.

I'll let you know for sure. I'm definitely after one, just gotta take care of a few things first. Chances are I'll be hunting over the winter for one. But keep an eye out anyway, if you find one let me know, and if I have the funding to throw at getting it, we'll see what I do.

So two LS powered third gens... The blue one is an auto, is this one going to be the same?

[Punkmaster 98]

I'll let you know for sure. I'm definitely after one, just gotta take care of a few things first. Chances are I'll be hunting over the winter for one. But keep an eye out anyway, if you find one let me know, and if I have the funding to throw at getting it, we'll see what I do.

So two LS powered third gens... The blue one is an auto, is this one going to be the same?

This one will be manual. gotta change things up lol

[L695speed]

This one will be manual. gotta change things up lol

When you get it done, I'll start the clock on how long it is, before you rip the auto out of the other car. lol.

[Punkmaster 98]

When you get it done, I'll start the clock on how long it is, before you rip the auto out of the other car. lol.

Nah i wont rip it out. That car is a daily. Been dailying it for 4 years now. And currently I work in VA so its good for my commute. doing about 800 miles a week driving back and forth on weekends. Currently get 22 mpg with it so i have no complaints.

[L695speed]

Nah i wont rip it out. That car is a daily. Been dailying it for 4 years now. And currently I work in VA so its good for my commute. doing about 800 miles a week driving back and forth on weekends. Currently get 22 mpg with it so i have no complaints.

Ok, fair enough, I've been daily driving a manual for the past 6 years. So for me, it is second nature, and every time I get in an auto, I have to make a special effort, not to slam the clutch. Sometimes it happens with predicibly hilarious results; such as hitting the left side of the brake pedal and going through the windshield. What are you doing in VA that you're living down there for the week? Just wondering.

[Punkmaster 98]

Ok, fair enough, I've been daily driving a manual for the past 6 years. So for me, it is second nature, and every time I get in an auto, I have to make a special effort, not to slam the clutch. Sometimes it happens with predicibly hilarious results; such as hitting the left side of the brake pedal and going through the windshield. What are you doing in VA that you're living down there for the week? Just wondering.

Currently working as an engineer on the MV Cape Ray. a ship stationed in norfolk. Its a Mon-fri job.

https://scontent-lga1-1.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/11707534_10153134766162545_6992164547086458449_n.j pg?oh=4e17d5208c8a5916bd3a1d827ee59e54&oe=564155CC

[Punkmaster 98]

aquired another piece to the puzzle. Gto t56 with 22k miles. Was pulled from an las swapped thirdgen.

https://lh3.googleusercontent.com/I6vGuEfySv4F6Wts9wakMxjGQaQZfK0H4t6kZLiCBly_Lk6mIl 7mMR6xUAYqDZO9m-bZ-kWrN8_mhZScHjlw7a4rmy1j3Rs2CBI2lfKo04MALT8D8zHNFoS ohWOOtHeP61fL-XO_PuoGsllRtP7_dJxf4gQo0XI5vqzOLwnHyMWUL-HPwbvA-x91GQKBhKrtHN4Z_l9FTKc6aWgU7NzycNYD2ypH0YIFWKRDRO6 d0TR5KWZpZRpEUE_h-OBggqWrHBpq5AhjtX0AbSHOhJp7ykmZ7wCV37a2ZjgN7CM7_sF 08G1qxzhBJ4ehgG91oU35rWOTBmShupkrPZA1WdnD7J0n2IGxP VxEx4UAv6F8RkLd8sYso-A85e4AgkE_pa2R0z35NH1UTNjgxSy668zZx1QPBo8LEsV9y1PX P8A5e1lHcUG0hXYDzDIASTzBrlOag6Jjqa32TNyW9YluNayvRr 3yRg-NWfQEsU8QSO3-SQxxrhXQR7L9NzU_oE7QzqYa1Mo-_23CBgo8cdB_UF_wNeQ=w1024-h576-no

[Punkmaster 98]

Didnt want to hack the wiring in the car so i got a 5 speed dash and harness. It was part of a grey dash. So i found a black one and pulled it apart to swap out the auto for a manual harness. Took some time to clean out the ducting for the ac/heat as well. Slowly getting there.

https://lh3.googleusercontent.com/tr2uxDPUlp7TehXKu2Uo2w79Owdo23sg6BGtombGqsoFTy_qGa B-3UN1WM4RwC2BWmSaOp_O-3jZaV51Yykb6Oj1M7ml3CR7m9O9aQ1sPBHcG2Px3QVYzU5i0Eq fhL9FIbilP-uBiAMgVU4s8HnJ32Lm9AauN_yjQdkKoBsAOcqPZWyhiocAeNMm RQn6vM6TGxis-EmmZDNF16ViTr-3b1w8D75sZsrAKh2-Cg5a35oaClJIJ-Z1V79xD1z3AviRSJxR5N8w5NB5cjt6lEMt57KC2KocqwXYovC2 IUihcqYeQMXG8EhN2sBs25R2X4cMxONDP4dPnEqMX_Ah54DF8d UrA0WvMgMBsoC6VoCrfqrmGmBOE4NgkciwmVTNt4NTKfk2z6RK 74lSEqsvR3cCmKLSi52zZQfWR0Q4MxK7qC_LKf6kTydjINqkVL mcDOPQo8b58our4hHmYdZHEgpM-eLHa_782NhrH_xT8KSTONPF_YQwX-3f-LtIE_SljH2vchOZ9EdGvvXTTTnzPFY954cTG0Sf26VeCKyAhqB t7P0=w1024-h576-no

[NJSPEEDER]

Car is going to be great once you are done. Just keep plugging away, the more time you spend getting it right now is that much less time you will have to spend worrying and fixing s*** later.

[Punkmaster 98]

Just an example photo, but i received my ICT Billet aluminum accessory drive brackets in the mail. this is the routing i will be doing since im not going to notch the kmember for 4thgen AC. I will be using the factory thirdgen ac mounted up high instead.

https://lh3.googleusercontent.com/AWP_NjujhWXXc493SfSYTD4uPIYz8HfGzxs00zoan3Yo7BOKpK YXHTs6nbUyHuFHUmli6W3NK5UrUDx2jX0bAPmMV1dBFArZNWoT nV2AhTMjqFYU8EaGM5gOHKDaeSYbWTEQ9wpJq1_5vV1KCT7oqq eTQamXNAyoP4ALYopsn3BFgA0bwi5apfXDT1SUF-Cbxvz9vc1KqUs-jTOC6WGUk9ZAxgdjORd68WMxZZJ38-fDcI01L103hgHaX796_mf89VTm_aT9N09p6CTAM9rV_lsGlqbY x8IkkMjWA_8RMj8MZugSRKumYIybkzLHPh9LiEwzfJuXBqGwfI EIcnqLF0eFWPyOIGJjdNc3VxVVv9KIrEe4aYfXAQYR2IT15IpT vA6ZVf0GVs6fXy49cksh6w3klnEyiQvUl1DFjZd2hhp52sf3u0 xvGx4KNkMJPyfgMRJLZAK_Zk5pogayw7zFK2zUZxAuk248Nbv9 _gGfrOrwRM2cgjXUdysUkQLX4HbrrlQ9_ZbRLsul7REUONsQ39 5a6l6LX9x4f9IXQPrgZc8=w943-h657-no

[L695speed]

Looks like you're moving right along, I finally got in touch with Pocket on TGO, he is working on my harness now. I may just say the hell with it and notch my crossmember. I'm not going to be running for a bit anyway. Just a heads up, but if you're going full 84, including the interior, some of the wiring is different, and the gauge arrangement is different.

[Punkmaster 98]

Looks like you're moving right along, I finally got in touch with Pocket on TGO, he is working on my harness now. I may just say the hell with it and notch my crossmember. I'm not going to be running for a bit anyway. Just a heads up, but if you're going full 84, including the interior, some of the wiring is different, and the gauge arrangement is different.

I initially thought about making the interior period correct, but i easily aquired a tan gta interior to stick with. the only thing that will actually be "84" on the interior will be the recaro seats. Sadly they dont reproduce the 2 line dash pads either. :cry:

[L695speed]

I initially thought about making the interior period correct, but i easily aquired a tan gta interior to stick with. the only thing that will actually be "84" on the interior will be the recaro seats. Sadly they dont reproduce the 2 line dash pads either. :cry:

Yeah Jon, that is like the holy grail, or one of them as far as parts go for the early cars, you'd think they'd produce a few now and then to sate the demand even if they charge 500 a pop for them. I'd replace mine if someone repopped them. Funny how everyone says 82-92 when 82-84; 85-90; 91-92 is a more appropriate breakdown of the third gen run as far as parts go. Don't mean to bust your bubble, but there is a black and gold 84 for sale somewhere down there. Don't recall the details. But the price was off the scale I think.

[Punkmaster 98]

Ive actually come across at least 10 black and gold 82-84 cars for sale that were decently priced and were hardtops. But I cant do much from the middle of the ocean. Ive been away at work since dec 7th :cry: . Thankfully Im going home on the 21st which means I can get the ball rolling again with the car. Im staying committed to the project and not gonna deviate from the plan. 8-)

[Punkmaster 98]

Slowly getting more parts. Scored a great deal on this lightly used exhaust. Will require modification to the body to make it work how I want. Looking forward to hearing it!
https://lh3.googleusercontent.com/2OmjWLfv_mJL_vNhK3bOp_52YCnHbrfGnovfgiG1JfiFTBARJq zDd724JOx-eTJGCZBLPubYDPrJXy0d2v7mmgVLjQ8ce8iU88Rb4pAD5arIKP-xaQ9XugESCLT5n5XMxUr7Z_ITl1M6o6FTEacSTLw0sQAXqX1Pd jj0ijZs-NNA_NwWbvQle7HK7UYuEPuZWvtiL05Ue-5vDWfwYg0FMenQOfvakkcSzguYkJsfdR1DixSm8MlxI1zZPBIP EtW3SFlypEc-d1XSMrPa2MSyt5nHhVJrMTILd5knpAG1uhec3LYQTZbA66w3IJ DWGf_Lwl64ZzZHwyPB8bbu-ZyS3doG7i25zHbljzgmtbJD0No8NA_cfEMjMSEOCjIy6Zg6f8J pGchW6kPa6w5P9gpGPiscELvJ_NHvmRkDw_PIgD_zvqt06qTh-7UKHwg4LkkpVLnkgq0EunApPYNBV901YURYQOYLwWrkF_6mRXA qZIEVKTif1y8DoQo9RYfXjmpKg7QsCJGYDJ-PjZEcdbBRKH6Mu0Qqj6hB3RpP2_3JCZBnqZSPX7uWv-X6W-NnzFAg5PGAAWRmBpepx6d01HuFDc6-P78t1oA=w1024-h576-no

[Punkmaster 98]

After more than a month my tubular kmember is arriving today. Looking forward to starting to work on the body. Progress has been slow. My fbody buddy got a shot of it being loaded onto the delivery truck

https://lh3.googleusercontent.com/uzRQBGHM0oIXqL6S9OgLiK32WkORk0y1_ZK45-OXLR_-StVeoHQVIGcEdnml7HF8lRCBUeo1yyvZPOW4EULDwn53o0JLAn CYSGBNQ59qNiVeRQUd6yRRdKECJsjm_vNXc_EIriAXLGcSnCXi rTMmLhHRro_MyjoYWewtXbNtS9j1txmn6tS2gJ2xSlyYsDTuOa IIdju8Zc1odCMkyXPEi1LqwlCgB6mIWAJQs_wGiYqUZUl4v1BQ Z98dYi9M5My8YE8NcXAIbZmWEswsEU0vC1Vc7i_RnjI6M1NSeU CZmP9tQurwZn9bVZCH7qxnNbd2AAdlluPnOPzoFEdu5uGd4vnV eCmci9jTeaY6MeDlrn09axwYniwoneU4TQgCnzkHnvOauZiZs8 FN5fcthb8cY2Yj7P3sDsut3E3-aCrAbNmAiHCugWufwegTDsUGdaJ17LL27FCf8Tre5qcmE6HuH3 79XUWb2dnpkgeadFV05k_KcrFQCrHylc9bEjszWbxvPapnR4LU UxwLsdPjL5grtov8en2xJ32Aazz48ZSFLkmDhbck6xO8dT7B-K1BlvDxXEtT6L55s2XkgFDO0tAcIB9Bxe6Yf9Y=w529-h939-no

[Punkmaster 98]

https://lh3.googleusercontent.com/5IiU2rsTfVNsoiZ1NKngit6bWEQYt9HkHFSVgPtbrjZT2vaNkp ei4oQn5mALa2f5R41jCdASa23lYf5iKuzeh5UTOZGT3BhfGRbY CuOekEB3bVzMZ893VBYEG6_GGEXt3dMma5AsVAptqidRE7zhuB SlnCnr28NONohb_eYnyhEw3GdxZVZDSEECX_nTEo7vOdPlRFFe vYAhOU5eS8w7waW3sIvBlp3vgQBlm_yPlGp5BUonE1EwIU8yDs nQcuy94koRstScpaKuFztu_fqrCHD8JqyBpVJRssNhDnQSJw3J 2Wvr_PrsgwxdO2V_sIuD4t79xVO15dXgRN_lOm9Z5yqllM1D9r S2Hxtpt78Gmzc-1gaMJYbUbCxQiwYEz3wl085jvl0943G3WXOfbnwfg4CVFRbkrj RalJ3yj3kqqFJY-5g8wLBQGmwe6L7SSbkCxeQdU41vG7cVaDawC4e5pxBlQLL0JZ1 2BQHp2wKqmQ_gP7k392r2cgePEcYqN4uHqCXJiidbY_j1nXn8m 4dY2fLa1ygPz8I0G8taK0j07RJ0xNxUlBLd1v23iP5lOhZQSxl ItnM-fDPOnnN3cNZbmcipV4YRzSk=w1024-h576-no

[ar0ck]

Thats a solid looking chunk of metal!

[Punkmaster 98]

Rear seats are finished. Quite pleased with the outcome. I did my best choosing a vinyl close to the original beechwood as possible. Looks just about on the money. Looking forward to getting the fronts finished and all stored away. I want the interior done (but not installed) before i start messing with the body of the car.

https://lh3.googleusercontent.com/lgI5jwxx0CtWWpSgjK4QLFNAs0L-mrODiKpmispIUnbYc9sfttqU5ysB7Qwdm6pu5bP1FKNYtOko5y oPQBjv6SaYIxPI0QAFaYdXxWNds_2gIKxoC6HL1Tgk4ISid8xp HPatTEOmxIhOSvVxWvFOHKDCkTEItrIViB9QModzElycUzJHQg ThomK7D6vltTgeMCvMPtYB-QCGQ2Vp2tr0oF19uJ8CdHbBuaErqhgH4ATxHLy8ZH3FYPjH4-0xyuFxEUFquSabplMoPikh8mlOtedk0T0CYQ4QCUz7yz04ovVN-IAPvr-vMup2in36UDf61Dkp_0Nyx25r9bRHwHyRL8TZrfVET5PX8blpL lX9tEfFvv_seyrI6ZY4NkYQMWHqLQy4yC2Uw_AnC7v-3CygP1HfLbIFOrIYUgykRjRRFqfSuaRXcixbx6kIGXEFfyazx9 6JI415YEkMTkzokst9UoPHDZxzwea_rbzs-fHLwIEG56mub5tuonbbq6TGM3xc82AXSFDzLp6FCs1wisBSZir 7joHkQveWRNZaD_p-fQoC70vE-NJyBxYWTA-2A_vh7JnGwE3yR6C-oA0Vt9CxVoEhVFRb0eYKTzm7a4vUtPNRnVVw=w1024-h576-no
https://lh3.googleusercontent.com/fQRd0-LXG_DB7EsEYycHP9Eq3P9x9LHTxygDucqpP-5wzitkk89ClU3JshbzOr3M1o5YBpcZavLcknWrUBdqCP086l0d 8iattIexe537mvJ9RFs8prdaQ68e4eQ9V8mlvssAaaCVbyA7_p nYZ344lIWJie_y22ZXK5AMMoYkKXbfadr0mxDBpZzh2nYiMxO_ EAIfxBd81fxLji-IF6J9FJGif6UHhGnRMWgJAcskWgSoeVmWYebW6Ia2GQcsHrf62 sLwRl8YJlvhGBRyJcKYwyewfH6r9R5gF6n4qyPSYH2jeWwj57U tw9lbB02jnekKLrRFG_QemhffDeoga275TcIjAiz3QfP2DBCJK IaJdioKY94J7xAlmcVSvO5rhY6WZ8iKt8D-mI1eEMFfQGwGe59bsfipc2WZrIqIfLdcfwtADq94dIb6OpWxeC 2PIig0gg57Y72gd1Y8v0--mTg5HypwTsA0ajjQG4PctLpNJ9Aa3baydoqdTHgNo9Gmdz3Y-7nh0kI-7PIeQHCcTQ_w7gyz7Kbov1syC1nh5sbg9_p9z4R7Hv92e_NwiF w7gsSH-oL4bmSgACpi20593d8krP9FFyrj12JcsCunWM-d8GmexNU1=w529-h939-no

[Jersey Mike]

Yeah, I'd say so! Came out looking good!

I did my best choosing a vinyl close to the original beechwood as possible. Looks just about on the money.

https://lh3.googleusercontent.com/fQRd0-LXG_DB7EsEYycHP9Eq3P9x9LHTxygDucqpP-5wzitkk89ClU3JshbzOr3M1o5YBpcZavLcknWrUBdqCP086l0d 8iattIexe537mvJ9RFs8prdaQ68e4eQ9V8mlvssAaaCVbyA7_p nYZ344lIWJie_y22ZXK5AMMoYkKXbfadr0mxDBpZzh2nYiMxO_ EAIfxBd81fxLji-IF6J9FJGif6UHhGnRMWgJAcskWgSoeVmWYebW6Ia2GQcsHrf62 sLwRl8YJlvhGBRyJcKYwyewfH6r9R5gF6n4qyPSYH2jeWwj57U tw9lbB02jnekKLrRFG_QemhffDeoga275TcIjAiz3QfP2DBCJK IaJdioKY94J7xAlmcVSvO5rhY6WZ8iKt8D-mI1eEMFfQGwGe59bsfipc2WZrIqIfLdcfwtADq94dIb6OpWxeC 2PIig0gg57Y72gd1Y8v0--mTg5HypwTsA0ajjQG4PctLpNJ9Aa3baydoqdTHgNo9Gmdz3Y-7nh0kI-7PIeQHCcTQ_w7gyz7Kbov1syC1nh5sbg9_p9z4R7Hv92e_NwiF w7gsSH-oL4bmSgACpi20593d8krP9FFyrj12JcsCunWM-d8GmexNU1=w529-h939-no

[Punkmaster 98]

Front seats are complete. Quite happy with how they came out. Back in Time Upholstery did a great job. I will be having them do the door panels and interior plastics in febuary.
https://lh3.googleusercontent.com/EH7ViCXMefiTBWatjVMchYSSwL_eTRCTNB9_aPfK5DJ8OLQ3Qu 3zQ5EVV6E4kQabtYL1eGFn7ehKdfq9kVRGF9pHxsue8ES8ELND 6Zgo2ZUK9PqLfvOXX_SbqTKz2PrRMhYsTRI-mcgs5ugYRfyPRzwRiB6eIU6MslZhSSSYf0KBN55FYTHibjrHJI QZmIYH2IsXlpFDL-mZB2fjx0PlGVSt8Gkma0MGzGu7zUDoPwbZw4mcSqm2SqrxrD3A O7ydkeTuFJKQB55IlCEk9h_IMwQL2JUxItqNvcCTwV4ggaSc2t i4Wp_JkRBGIf5-9IO78bXxsYNpfz7VWprzyam8gSVNFZ8gtxjCXRCoTmexE6fyLX MtHOaQtA5_VfIbEMUk7pasmIbo9Oz7Xd7QqfDD_mOtUKMvBlW1 9Q3v9ZvQq9msFTgRlP5jiLjY0PINn8hrHgqOd-mQbDpT2D66mekFEQox7SM9PG_vHWTHVBYW2oksC36TvNoAG80g wPziFV0z0w8iSLM_Tc1yz1yY659UrI3vTghdiVzlMim-8CZJmG1E-kZysDrO382xOoasLToyr0ftUs459ch-w6AK8sZ_jWJpdo7y5KEVimnrjTPoOW5j6GsY=w1024-h576-no