First 05 mustang in the 11's N/A

[Koll]

http://www.hardcore50.com/race_coverage/NMRA-Bradenton/2005/P3118870.jpg

http://home.comcast.net/~wicked46/jb051199HQ.WMV


Bassani X pipe
Axle back Bassani
Underdrive pulleys
Diablo Tuner
Centerforce Clutch
Cyn-R-G Flywheel
Motive 4.56 gears
Bogart D10 rims
M/T Drags
C and L intake and Mass air meter
H and R lowering Springs
Metco Control arms

[BrandonDrecksage]

damn....god as drive he banged 2nd and 3rd nicely

[Koll]

Probably has a top end of like 120 with thoes 4.56 gears tho

[bad64chevelle]

who cares as long as he doesnt top out until JUST after 1320 ft.

[bad64chevelle]

i think i only counted 4 gears there. If so he has ALOT more to go....Later on ill put my headphones on and listen better!

[Squirrel]

yeah only 4th he got into....since hes shifting like a maniac :D, you can see the tailights hop up and down when he goes into 4th

[enRo]

Ahaha but that stang does sound hella nice

[12secondv6]

Bad ass driver!

1.58 60 foot
113.5 MPH
11.994 ET

[Ant'sWS6]

Ahaha but that stang does sound hella nice

:werd: :drool:

[Squirrel]

i didnt wanna be the first to say it 8)....sound meannnnn

[kamikaz]

all this Mustank talk makes me want to :barf:

Later,

Santos

[Fasterthanyou]

That sounded nice?!?!?! If I weren't so damn mature I'd come over there and slap you guys silly. That car sounded like crap. Went like stink but that didn't sound at all like a Mustang. Ford is almost as picky about their exhaust sound as Ferrari and it doesn't take much to make a stang sound like arse... that fast 05 gt doesn't sound nearly as cool as a stock gt. Also, what's up with the hoping... did the notoriously crappy ford shocks already give up because that isn't normal unless his springs are super soft (which might be the case).
His burnout was really nice. but the sound, YUCK. Sounded like 2 ecotecs next to eachother trying their hardest to pull out into traffic.

[BlueFBird]

ya really i thought it sounded like crap too

[Batman]

i think i only counted 4 gears there. If so he has ALOT more to go....Later on ill put my headphones on and listen better!

Ideally you want to cross the line at the very top of the gear that is 1:1, which in his case is 4th, so he is right on. After that the overdrive gears kill your acceleration. I agree a stocker sounds better and I could drive a golf cart into teh 11's with 4.56's, butt still for bolt ons and gears, not too shabby.....for a stang.

[j0n]

so what did it take to put an ls1 into 11s?

[MonmouthCtyAntz]

yes very nice

[foff667]

so what did it take to put an ls1 into 11s?

there have been stock internal zo6's in the 11's with just tires. Magnus from hptuners ran high 10's stock internals in his 4.1 gen ls1 powered firebird.

[Fasterthanyou]

i think i only counted 4 gears there. If so he has ALOT more to go....Later on ill put my headphones on and listen better!

Ideally you want to cross the line at the very top of the gear that is 1:1, which in his case is 4th, so he is right on. After that the overdrive gears kill your acceleration. I agree a stocker sounds better and I could drive a golf cart into teh 11's with 4.56's, butt still for bolt ons and gears, not too shabby.....for a stang.
That 1:1 gear thing is too simplistic and generally incorrect. The fastest way down a 1/4 mile with an automatic or SUPERMAN shifting is with the most gears before the shifting time becomes detromental. Example, if I had a 0 time between shifts and a .5 overdrive and had the horsepower to trap 120mph then I'd want some crazy high gears in the rear to let me use all my gears. With more gears you can keep the engine closest to it's peak power. Ideally we'd all have CVT's that kept our engines at the RPM that makes enough horsepower with traction.
I've broken down gear selection to a science, it's what I do with just about everything related to cars :) .

[foff667]

i think i only counted 4 gears there. If so he has ALOT more to go....Later on ill put my headphones on and listen better!

Ideally you want to cross the line at the very top of the gear that is 1:1, which in his case is 4th, so he is right on. After that the overdrive gears kill your acceleration. I agree a stocker sounds better and I could drive a golf cart into teh 11's with 4.56's, butt still for bolt ons and gears, not too shabby.....for a stang.
That 1:1 gear thing is too simplistic and generally incorrect. The fastest way down a 1/4 mile with an automatic or SUPERMAN shifting is with the most gears before the shifting time becomes detromental. Example, if I had a 0 time between shifts and a .5 overdrive and had the horsepower to trap 120mph then I'd want some crazy high gears in the rear to let me use all my gears. With more gears you can keep the engine closest to it's peak power. Ideally we'd all have CVT's that kept our engines at the RPM that makes enough horsepower with traction.
I've broken down gear selection to a science, it's what I do with just about everything related to cars :) .

and all this time i thought you were just supposed to overpower the car and get the lowest numerical gearing you could find like my 2.73 geared Z or my 2.93 geared gtp :lol:

[BigAls87Z28]

WOOWOWOWOWOWOWOWOWOWOWOWOW!!
11's!! Man, these Ford guys are right were Fbody guys were back in 99!! DAMN, they are catching up!! Only 6 years behind now!!

[Tru2Chevy]

and all this time i thought you were just supposed to overpower the car and get the lowest numerical gearing you could find like my 2.73 geared Z or my 2.93 geared gtp :lol:

Wow....I thought the GTPs got more gear than that. Even the Lumina has a 3.33 final drive :D

- Justin

[foff667]

and all this time i thought you were just supposed to overpower the car and get the lowest numerical gearing you could find like my 2.73 geared Z or my 2.93 geared gtp :lol:

Wow....I thought the GTPs got more gear than that. Even the Lumina has a 3.33 final drive Â*:D

- Justin

yah alot of the guys go to 3.29's

[12secondv6]

WOOWOWOWOWOWOWOWOWOWOWOWOW!! Â*
11's!! Â*Man, these Ford guys are right were Fbody guys were back in 99!! Â*DAMN, they are catching up!! Â*Only 6 years behind now!!

:lol:

Ford > GM

[enRo]

Ford > GM

Talking about local junkyards, correct? :lol:

[Ian]

Ford > GM

Talking about local junkyards, correct? Â*:lol:

or percentage of average income spent on repairs!