NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- For Sale - Automotive Parts (http://www.njfboa.org/forums/forumdisplay.php?f=27)

- - Need 3rd Gen Prop Valve (http://www.njfboa.org/forums/showthread.php?t=24681)

deadtrend1

03-31-2007 12:21 AM

Need 3rd Gen Prop Valve

For a 89-92 Rear Disc Car. The 87 one I got in now doesnt seem to get enough pressure to the rears. Thanks

camaroracer1992

03-31-2007 03:09 PM

FWIW; i bought a factory rear disc valve for mine when i did the ls1 rear brake swap from the drums. i didnt notice anybit of difference in stopping from when the brakes were on there for a week with teh old prop valve.

deadtrend1

03-31-2007 09:29 PM

Maybe I need to bleed them again or something. But with the rear in the air, car in gear and brake pedal mashed ..... the rear tires were still spinning some

Iroc-z86

03-31-2007 10:07 PM

how new are the brakes/calipers? when i did my rear swap with new calipers, pads, and rotors it took a little while for my brakes to break in and stop on a dime. the e brake works just as good. just a suggestion to drive it around a little and do some hard stops. might help?

All times are GMT -5. The time now is 06:00 PM.