NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- General Tech (http://www.njfboa.org/forums/forumdisplay.php?f=37)

- - LT1 fuel line relo (http://www.njfboa.org/forums/showthread.php?t=44278)

LT1 fuel line relo

Anyone attempt it or have pictures of a success?
Something along these lines....
http://www.lt1engine.com/tech/factor...ne-relocation/

no but doooooooo itttttttt!!!!!!

Maybe, you have the fuel line disconnect tool?

So is it ok to delete the EVAP line and solenoid?

Quote:

Originally Posted by Shownomercy (Post 593836)

So is it ok to delete the EVAP line and solenoid?

I don't have an answer that I can say is 100%. There is allot of debate over if you should or shouldn't. People say that with it deleted you can get gas fumes in the car? Not sure about that? Maybe some type of vent/check valve installed off the canister?

On my car, to clean up the look I made a bracket and mounted the selonoid behind the intake where the EGR was and ran a braided line back up to the TB. If you did the same you could run the EVAP line with the fuel lines to the back on the intake as well.