Need a Rear End Shop that does C Clip Eliminators
 

Does anyone know of a shop that does good work on rears? I have a second gen rear and I want to have C-Clip eliminators welded on the end of the tubes.How much does this generally cost? I would like a good shop since I am not interested in dying. Anyone know where I can get the rear end powdercoated for a good price?

Do you mean you want a 9" ford style housing end done? C clip eliminators usually just bolt to the out side of the flange.

It looked like Moser had two types of C-Clip eliminators. The bolt on type that required you modify the backing plate for the drum brake setup and a weld on type that replaced the current ends. I posted the link to the page that has the ends I am talking about. If I am wrong please tell me so I don't continue to go dow the wrong path here.
http://www.moserengineering.com/Page...usingends.html

Like I said that is a totally new housing end which uses a old Ford style bearing. Definately better than a c-clip eliminator kit but may require changine the axles.

If the axels do need to be changed do you know of a shop that can do this kind of work? Would you happend to know how much this costs?

We can do the work for you.

If the axels need to be changed, you may have to upgrade your carrier as well.

Installing the housing ends, new axels, and new posi unit will cost around $1400 parts and labor

Obviously, if you do not need everything the price will be lower.

What are the labor charges on putting the ends on and setting up the carrier?

Somewhere around $500

any shop with a press can press the c-clip elims on for you....then just bolt everything back together....problem solved....

He is not asking about c-clip eliminators, he asked about 9" ends which require alot more work but are stronger and do not have the leaking problems traditionally associated with the retro fit kit..

Josh, you do this work in house? I am thinking about doing the same thing for my 73 camaro with the 8.5" rear

Yes we do 9"ends and c clip eliminator kits..