help me out right quick

[TransAm619]

ok, so im nightshading my turn signals today.. i got all the bolts off the front signals but i cant wiggle the damn things out. Taking the headlight out isnt an option so does anyone have any ideas or what im doing wrong? i mean, its off.. i just cant wiggle it out of its hole.. it moves all over but not enough to take all the way out...

-adam

[qwikz28]

this is what i used adam...

http://www.ls1tech.com/forums/showth...orner+write+up

good luck homie

[ar0ck]

It should just be the three bolts one on each side and on in the middle and they push out not in.

[enRo]

Ummm... removing headlights are like 80% mandatory, unless u can use a cheerio as a bracelet... i took my headlights out... takes 5 minutes each headlamp, and about 5 minutes to remove the turn signals. Its a hellova lot easier, especially on the paint.

[qwikz28]

Originally Posted by BigDaddyKane

Ummm... removing headlights are like 80% mandatory, unless u can use a cheerio as a bracelet... i took my headlights out... takes 5 minutes each headlamp, and about 5 minutes to remove the turn signals. Its a hellova lot easier, especially on the paint.

i used masking tape