 |
02-14-2006, 04:45 PM
|
#1
|
Join Date: Aug 2004
Location: North Jersey
Posts: 3,047
|
Any Interest in a Roller 305 Shortblock?
Well, my 350 will be back from the machine shop tomorrow, and should be assembled in the next couple weeks. That means I need to unload my 305 shortblock (because I'm keeping the heads) that's in the car. You can hear it run for now, and even get a ride in the car. Here's the specs -
'87 roller 305 motor, redone about 25K miles ago. At the time, we installed new rings/bearings/freeze plugs, new roller lifters, fresh oil pump, had the crank turned .010 and polished, Cloyes double roller timing chain, and swapped in a Crane 2031 Compucam (208 / 214 duration, .438 intake / .452 exhaust lift on a 112 LSA). With S/R Torquer 305 heads and a TPI on top, it made 223 hp and 277 ft. lbs/tq to the rear wheels on a lean factory tune.
Would like to get $300 for the shortblock; will come with a balancer and stock timing cover. The cam and lifters alone cost over that much. I need to keep the oil pan for my 350. Post or PM with questions/offers!
__________________
Seeya,
Steve R. in North Jersey
'16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car!
Former Toy - '88 Monte SS - had lots of mods...
Last edited by The Fixer; 02-14-2006 at 04:50 PM.
|
|
|
|
02-15-2006, 11:05 AM
|
#2
|
Join Date: Apr 2005
Location: East Stroudsburg,PA
Posts: 55
|
PM sent
__________________
1987 Firebird Formula
SLP Headers,3in. Flowmaster Catback, l69 dual snorkel intake,SSM sub-frames, 4th gen power leather seats
|
|
|
|
|
02-15-2006, 11:42 AM
|
#3
|
Join Date: Aug 2004
Location: North Jersey
Posts: 3,047
|
PM responded to.
__________________
Seeya,
Steve R. in North Jersey
'16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car!
Former Toy - '88 Monte SS - had lots of mods...
|
|
|
|
|
02-16-2006, 09:24 AM
|
#4
|
|
10 Second Club
Join Date: Aug 2004
Location: Hatfield, PA
Posts: 1,292
|
its a great addition for any nautical enthusiast for a boat anchor
|
|
|
|
|
02-16-2006, 12:15 PM
|
#5
|
Join Date: Aug 2004
Location: North Jersey
Posts: 3,047
|
Quote:
|
Originally Posted by camaroracer1992
its a great addition for any nautical enthusiast for a boat anchor
|
Hahahaha.  I figure if someone is set on keeping a 305, or needs a good-running engine quickly, this is just the ticket.
__________________
Seeya,
Steve R. in North Jersey
'16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car!
Former Toy - '88 Monte SS - had lots of mods...
|
|
|
|
|
02-24-2006, 10:54 PM
|
#6
|
Join Date: Nov 2004
Posts: 3,530
|
still got that 305 might be needing one in a week or so.
|
|
|
|
|
02-25-2006, 05:30 PM
|
#7
|
Join Date: Aug 2004
Location: North Jersey
Posts: 3,047
|
Quote:
|
Originally Posted by camaro2you
still got that 305 might be needing one in a week or so.
|
Yep, it's still in the car, and you can hear it run if you want. Again, this is for a complete shortblock (block, crank/rods/pistons/cam, timing chain, oil pump). I can even arrange a delivery for ya if you have an engine hoist at your place, since a shortblock will fit in the back of my Cherokee.
__________________
Seeya,
Steve R. in North Jersey
'16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car!
Former Toy - '88 Monte SS - had lots of mods...
|
|
|
|
|
02-26-2006, 07:07 PM
|
#8
|
|
10 Second Club
Join Date: Aug 2005
Location: lake hopatcong
Posts: 331
|
i have a friend who neds a 305 roller motor for his boat as a core for a re-build.pm me if you will seperate bottom end, no heads,cam or intake.
|
|
|
|
|
02-26-2006, 09:55 PM
|
#9
|
Join Date: Aug 2004
Location: North Jersey
Posts: 3,047
|
PM sent to camaroAL.
__________________
Seeya,
Steve R. in North Jersey
'16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car!
Former Toy - '88 Monte SS - had lots of mods...
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
