 |
09-11-2008, 11:25 AM
|
#1
|
Join Date: Oct 2006
Posts: 929
|
Carb parts for sale
All of this stuff is new or very close to new with LESS than 700 miles on it, i decided to go a different direction with my motor and switch to TPI so all of the carb stuff has to go:
Black ‘Chevrolet’ air cleaner with 3in k&n air filter and bowtie nut - $60 SOLD
Demon road demon carb 625 cfm, stock jets, has 400 miles on it, with dual feed line, vacuum secondaries - $250
1” carb spacer adapter spread bore to square bore -$10 SOLD
Tall plain chrome valve covers perimeter bolts very clean no scratches -$20
Generic aluminum Dual plane intake manifold -$40
Black 100 amp Alternator V-belt, one wire, works great only 2000 miles on it - $75
Chrome alternator brackets for 86 style sbc - $10
Aluminum water pump pulley, needs a little cleaning but overall great shape, v- belt -$10
V-belt Chrome Crank pulley - $10
Brand new 2 groove v-belt Power steering pulley has maybe 300 miles on it press on style - $10
305 heads, off early- mid 80’s 305, freshly rebuilt, they have maybe 1k on them after rebuilt, they do NOT smoke - $100
Crane Cams Gold 1.6, 1.5 roller rocker arms about 20k on them, they work fine, no ticking or visible damage - $150
Chrome Water neck early style for v-belt very clean no scratches - $10
GM HEI stand alone Dizzy recently tested by professional shop and passed, new vac advance mechanism, accel ignition chip included - $50
New stock Carter mechanical fuel pump self regulated at 6 psi, no return, - $25
Carb throttle cable and bracket - $15 SOLD
Holley 600 CFM spread bore Carb, vac seconds, comes with remainder of rebuild kit - $50
Local pickup is prefered, but can work with buyer for shipping. Thanks
__________________
1986 IROC-Z - 305- .030 over, Voodoo cam, 113 vette heads, tpi, hedman torque steps, GMMG 3in catback, custom chip, t56, 3.27s 9 bolt, rest of the car is stock.
2011 Camaro - 2lt/rs red jewel tincoat, m6 - SOLD
2014 Camaro SS - bolt ons
1998 Jimmy - the beater
Last edited by Iroc-z86; 11-07-2008 at 08:19 AM.
|
|
|
|
09-11-2008, 11:54 AM
|
#2
|
Join Date: Oct 2006
Posts: 929
|
__________________
1986 IROC-Z - 305- .030 over, Voodoo cam, 113 vette heads, tpi, hedman torque steps, GMMG 3in catback, custom chip, t56, 3.27s 9 bolt, rest of the car is stock.
2011 Camaro - 2lt/rs red jewel tincoat, m6 - SOLD
2014 Camaro SS - bolt ons
1998 Jimmy - the beater
|
|
|
|
|
09-12-2008, 09:07 AM
|
#3
|
Join Date: Oct 2006
Posts: 929
|
tttt
__________________
1986 IROC-Z - 305- .030 over, Voodoo cam, 113 vette heads, tpi, hedman torque steps, GMMG 3in catback, custom chip, t56, 3.27s 9 bolt, rest of the car is stock.
2011 Camaro - 2lt/rs red jewel tincoat, m6 - SOLD
2014 Camaro SS - bolt ons
1998 Jimmy - the beater
|
|
|
|
|
09-12-2008, 11:44 PM
|
#4
|
Join Date: Oct 2006
Posts: 929
|
i want to add a SBC 350, has rotating assembly still installed, needs machine work, the bearings on the crank are bad, its 4 bolt mains, 10066036 i believe off the top of my head is the casting number. would like to get $100 for it, open for offers. will try to get pics this week.
__________________
1986 IROC-Z - 305- .030 over, Voodoo cam, 113 vette heads, tpi, hedman torque steps, GMMG 3in catback, custom chip, t56, 3.27s 9 bolt, rest of the car is stock.
2011 Camaro - 2lt/rs red jewel tincoat, m6 - SOLD
2014 Camaro SS - bolt ons
1998 Jimmy - the beater
|
|
|
|
|
09-15-2008, 12:31 PM
|
#5
|
Join Date: Oct 2006
Posts: 929
|
ttt
__________________
1986 IROC-Z - 305- .030 over, Voodoo cam, 113 vette heads, tpi, hedman torque steps, GMMG 3in catback, custom chip, t56, 3.27s 9 bolt, rest of the car is stock.
2011 Camaro - 2lt/rs red jewel tincoat, m6 - SOLD
2014 Camaro SS - bolt ons
1998 Jimmy - the beater
|
|
|
|
|
09-15-2008, 10:39 PM
|
#6
|
Join Date: Apr 2006
Location: Point Pleasant
Posts: 1,809
|
PM sent.
__________________
-Vinnie
94 2wd SBSC Gmt400. 330CI LSX, Fast 102, Trickflow 205s, close ratio nv3500, 4.30/trutrac.
|
|
|
|
|
09-15-2008, 11:05 PM
|
#7
|
Join Date: Oct 2006
Posts: 929
|
replied.
all parts located in southern sussex county for future reference.
__________________
1986 IROC-Z - 305- .030 over, Voodoo cam, 113 vette heads, tpi, hedman torque steps, GMMG 3in catback, custom chip, t56, 3.27s 9 bolt, rest of the car is stock.
2011 Camaro - 2lt/rs red jewel tincoat, m6 - SOLD
2014 Camaro SS - bolt ons
1998 Jimmy - the beater
|
|
|
|
|
09-18-2008, 10:59 PM
|
#8
|
Join Date: Oct 2006
Posts: 929
|
still for sale
__________________
1986 IROC-Z - 305- .030 over, Voodoo cam, 113 vette heads, tpi, hedman torque steps, GMMG 3in catback, custom chip, t56, 3.27s 9 bolt, rest of the car is stock.
2011 Camaro - 2lt/rs red jewel tincoat, m6 - SOLD
2014 Camaro SS - bolt ons
1998 Jimmy - the beater
|
|
|
|
|
10-16-2008, 08:47 AM
|
#9
|
Join Date: Oct 2006
Posts: 929
|
havent had this up top in a while
__________________
1986 IROC-Z - 305- .030 over, Voodoo cam, 113 vette heads, tpi, hedman torque steps, GMMG 3in catback, custom chip, t56, 3.27s 9 bolt, rest of the car is stock.
2011 Camaro - 2lt/rs red jewel tincoat, m6 - SOLD
2014 Camaro SS - bolt ons
1998 Jimmy - the beater
|
|
|
|
|
11-07-2008, 03:04 AM
|
#10
|
Join Date: Mar 2008
Location: Shreveport Louisianna Barksdale AFB
Posts: 1,415
|
Still got the 600cfm holley? Does it need to be rebuilt? Im looking for a cheap carb to see if the problem with my motor is my 750 being to big for my car or not.
__________________
USAF Jet Propulsion Specialist
 1985 383 Camaro-nothing special I promise 
2000 NBM z28-also nothing special
|
|
|
|
|
11-07-2008, 08:18 AM
|
#11
|
Join Date: Oct 2006
Posts: 929
|
yeah i still have it. I did rebuild it a few years ago...used it for about 3 months then replaced it with the demon and its been sitting in my garage for a few years now. as far as i know it should be ok, its just old and cosmetically doesnt look good.
__________________
1986 IROC-Z - 305- .030 over, Voodoo cam, 113 vette heads, tpi, hedman torque steps, GMMG 3in catback, custom chip, t56, 3.27s 9 bolt, rest of the car is stock.
2011 Camaro - 2lt/rs red jewel tincoat, m6 - SOLD
2014 Camaro SS - bolt ons
1998 Jimmy - the beater
|
|
|
|
|
11-12-2008, 10:15 PM
|
#12
|
Join Date: Oct 2006
Posts: 929
|
Still have it all, open for offers, need this stuff gone
__________________
1986 IROC-Z - 305- .030 over, Voodoo cam, 113 vette heads, tpi, hedman torque steps, GMMG 3in catback, custom chip, t56, 3.27s 9 bolt, rest of the car is stock.
2011 Camaro - 2lt/rs red jewel tincoat, m6 - SOLD
2014 Camaro SS - bolt ons
1998 Jimmy - the beater
|
|
|
|
|
12-20-2008, 12:14 AM
|
#13
|
Join Date: Oct 2006
Posts: 929
|
still got them, open for offers!
__________________
1986 IROC-Z - 305- .030 over, Voodoo cam, 113 vette heads, tpi, hedman torque steps, GMMG 3in catback, custom chip, t56, 3.27s 9 bolt, rest of the car is stock.
2011 Camaro - 2lt/rs red jewel tincoat, m6 - SOLD
2014 Camaro SS - bolt ons
1998 Jimmy - the beater
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
