Chevy S10 Question - NJFBOA - Home of New Jersey's Camaros and Firebirds

karr95 · 06-20-2005, 02:59 PM

I recently picked up a 1995 Chevy S-10. The problem I am having is the tranny, it is definatly on its way out and needs to either be replaced or rebuilt. However, will an f-body transmission work in there? It is a 4L60E in there, I wonder if either the V6 or V8 Trans has the same bellhousing and would work for this application.

Thanks

Mike · 06-20-2005, 03:02 PM

im sure foff will know....

but......details, what motor do you have, 2x4 or 4x4 etc......

foff667 · 06-20-2005, 03:09 PM

yah i think it would depend on if its a 4x4 or 4x2 but the bolt patterns should be the same from most fbody applications except ls1's.

karr95 · 06-20-2005, 03:38 PM

Its a 2wd model. Thats why I was thinking it might work.

Slow Z · 06-20-2005, 11:40 PM

pretty sure its the same bellhousing unless in the mid90's they put something other than the 4.3 motor in there...

foff667 · 06-21-2005, 06:47 AM

Quote:

Originally Posted by Slow Z

pretty sure its the same bellhousing unless in the mid90's they put something other than the 4.3 motor in there...

there was a 4.3 early vortec motor which was crap...not sure what the 4 cyl motor was at the time.

karr95 · 06-21-2005, 07:59 AM

Thanks for all the replys guys. I forgot to mention that it is a 4.3 V6.

foff667 · 06-21-2005, 08:43 AM

Quote:

Originally Posted by karr95

Thanks for all the replys guys. I forgot to mention that it is a 4.3 V6.

good luck with that motor...maybe we should have another bbq at al's house

see if it brings the same luck hehe