Here ya go incase you didn't get my e-mail. Took me a while to figure out how to use only 2 relays but I got it all checked out. Also, this is the safest circuit possible. The Delay box is powered off the WOT switch since I didn't know if just removing the input would "cancel" the output delay or not. It would suck if you were going down the 1/4, lift for whatever reason and then a couple seconds later stage 2 kicks in. Hence the insurance of no screw ups. Also, it would be best to test your wiring (and this circuit) BEFORE going to the track. Just install a couple LED's with some resistors and do a WOT run with no bottle.
__________________
, Jon
Owner of a Red Sled.
If it\'s EFI I can tune it. Specialize in 82-95 GM (yes Lt1\'s)
\"If you can leave black marks on a straight from the time you exit a corner till the time you brake for the next turn.......Then, you have enough horsepower\" - Mark Donohue
