 |
03-22-2006, 02:25 PM
|
#1
|
Join Date: May 2005
Location: Jackson, NJ
Posts: 59
|
Rattling/Buzzing from shifter...
Ever since I got my car the shifter, (factory Hurst), has made a rattling and buzzing sound at full throttle. I don't think it's anything serious but it is annoying as hell. I've heard that it could possibly be the throwout bearing...Anybody have any ideas? I'm just trying to figure out if it's something worth tearing into it to try to stop the noise or if it's something normal I have to live with.
__________________
1997 Camaro Z/28: Hurst shifter, 1LE intake mod, Lingenfelter Super Tube CAI, BMR sway bars, !stock exhaust...
|
|
|
|
03-22-2006, 02:27 PM
|
#2
|
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,476
|
May be a stupid question, but did you check to make sure that the shifter is bolted down tight?
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
|
|
03-23-2006, 01:24 PM
|
#3
|
Join Date: May 2005
Location: Jackson, NJ
Posts: 59
|
Well, the actual stick itself is bolted down tight...I've never looked at anything below that...The car has been doing it since day 1. At first I figured it was normal but it's becoming progressively more irritating to me...I'd have to break the silicone that's sealed around the base down there, think it's worth a look? The previous guy said the dealer put the shifter in, so maybe something is loose...
I'm just having a hard time believing that the mechanic who did it would be so incompetent that he couldn't manage to bolt it down correctly  ...
__________________
1997 Camaro Z/28: Hurst shifter, 1LE intake mod, Lingenfelter Super Tube CAI, BMR sway bars, !stock exhaust...
Last edited by slayerxxx213; 03-23-2006 at 01:29 PM.
|
|
|
|
|
03-23-2006, 10:00 PM
|
#4
|
Join Date: Aug 2005
Location: Millville & Little ferry New Jersey
Posts: 454
|
Does the vibration go away when your up to the speed you are going for and after your rpm's drop?? Do you have an aftermarket exhaust?? sometimes certain rpm's set off different vibrations in your car depending on how low or the frequnecy of the exhaust.
__________________
2002 Z/28 = Firemutt Racing 370 w/ Cam, Trick Flow heads, TPIS 90mm Intake & 90mm T.B., Vigilante 3600 t.c., Michael's Transmissions Built 4L60E.
QTP Headers, Mufflex Stainless Y-pipe, Pypes Performance Exhaust, Moser 12-bolt w/ 33 spline axles,Truetrac & 3:73's., Spohn.
Cartek Tuned...
|
|
|
|
|
04-09-2006, 08:03 PM
|
#5
|
|
10 Second Club; Has fan club
Join Date: Dec 2005
Location: Delmont nj
Posts: 4,369
|
I heard the stock shifters have rubber isolators or something, and the better ones have metal, to get rid of all that slop. and thats what causes the noise
Mine is the same way, Im not worried about it.
__________________
01' Z06 62k miles. Vararam, Longtubes, off road xpipe, tuned by me. Times TBA
2001 Corvette, Bolt ons , tuned 10.75@124.56 mph 1.38 60' Sold
1997 Saturn Sc1 5spd DOHC swapped
Bolt ons, decked head, stock intake cam on exhaust side, lotsa weight redux
13.22@102.32 mph 1.93 60'
12's on moda? One day
|
|
|
|
|
04-10-2006, 10:13 AM
|
#6
|
|
Sliderule / Moderator
Join Date: Oct 2004
Location: Catawissa PA
Posts: 2,294
|
When in gear if the shifter has no play then it is just the Hurst shift design and is actually common. Mine did it badly at cruising speed and drove me nuts so I swapped to the B+M ripper which doesn't buzz.
There isn't anything you can do about it. A factory shifter has a dampner that prevents vibration, but does cause the shifts to be less crisp.
If the shifter feel loose when in gear then the problem could be the Isolator that TADriver is refering too. There is a small plastic "cup" that fits between the slider ( Offset cup) in the trans and the ball at the end of the shifter. Over time or hard abuse they can become worn and damaged.
Oddly, the T56 service manual states to inspect the Isolator and Offset Cut and replace if worn, BUT no one ( GM, Ford or MOPAR ) sells just the isolator any longer, if it's damaged you need to buy an entire factory shifter assembly to get the $3 part! I know of no aftermarket replacement.
__________________
93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada
1) Build it
2) Race it
3) Break it
4) Repeat!!!
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
