THE BIG LIST

[V]

this is just a quick beginning, i'll update it daily and add more... all prices are somewhat negotiable as well...

**EDIT**..some more added today, more to come tomorrow again...

Engines
91 305 longblock 7k miles $100
84 Ford 351w engine 8k miles, many new parts. $400

Transmissions
(2)TH350s $100 ea.
'89 700R4 $200
94 3.4l V6 auto trans $100
ford c6 4x4 trans $300
early 90s accord auto trans?, core or rebuild?, $20
88 ford bronco manual shift transfer case BW 1356? $50
95 ford bronco electric shift transfer case NP200 $50

rear ends
1995 camaro v6 10 bolt, non-posi, drum rear, complete $200
1989 camaro 9 bolt, 2.77 posi, complete $250(pending, i think?)
78-88 g body rear axle housing $50
(2)ford mustang 8.8 rear housings(94-98 ) $50 ea
ford 8.8 center, gears 3.73, posi, needs spider gears $100

Air/fuel
91 TBI system complete(intake TB, harness, ECM) $150
89 iroc 350 TPI system complete, intake, airbox, harness, ecm etc. $350
ford 351w 2bbl stock intake manifold
88 tpi lower intake manifold only $25
95 3.4 v6 upper intake manifold $25

engine compartment parts 82-92
serpentine belt drive with all acc. and brackets $125
89 v8 tpi radiator $50
89 a/c condensor $25
complete duals with brackets $50
dual fans, loose, $30 pr
single electric fan w/mounts $40
engine driven fan shroud $25
evap canisters $5 ea
vacuum balls $5 ea
washer fluid tanks $5 ea
overflow tanks $5 ea
wiper motors $10 ea
a/c heater box, 2 engine comp. peices, $20
wiper cowl w/washer squirters $5
hood hinges w/o shocks $10
88 iroc steering box $40

93-02 engine compartment parts
camaro wiper cowl $10
94/95 v6 electric cooling fans (2) $20
94 ecm V6 3.4 auto $10
95 ecm v6 3.4 auto $10
wiper motor and linkage 93-02 $25

93-02 interior parts
95 camaro console, button bad, hinge good $25


LS1 engine parts
'00 intake manifold $100
coil packs(8 ) w/brackets $75
'00 camshaft w/pushrods $75
'01 camshaft w/pushrods $100
'00 "853" heads, complete $200
'00 stock roller lifters $75
"00 stock rocker arms $50
valley cover $40
edelbrock shorty headers $60
ls1 "return-less" fuel rail $50
'01 stock exhaust manifolds $40
'01 stock y-pipe $50
'01-02 hi-flow y-pipe(no flat spot) $100

seats
95 camaro grey cloth, drivers worn, $75 pair
95 camaro grey cloth rear back only w/belts, $50
89 iroc red cloth front seats, faded, power drivers $100 pair
89 iroc red rear seats complete w/belts $50

Interior
95 camaro grey door panels manual windows, $40
94 firebird door panels, power $40
82-92 hardtop a pillar trim $20 pr
91 camaro steering column, auto, w/wheel and airbag $20
86 iroc steering column, 5spd, w/bird wheel


dashboards
91 camaro RS dash, complete $100
95 camaro v6 dash complete $100
89 iroc dash shell $50
89 iroc 145mph speedo cluster $110

Hatches
85 firebird hatch w/spoiler $25
88 iroc hatch no spoiler had 3rd brake light $20
94 firebird hatch low wing style $50
95 camaro hatch w/spoiler $75
88 iroc hatch piece w/3 pedestal LOW spoiler and NO glass $40
91 bird hatch no spoiler, has poor tint $10

Doors
94 firebird doors, w/glass $50 pair
95 camaro doors, w/glass $100 pair
93-02 firebird drivers door shell(2) $40 ea
91 firebird doors w/gfx $50 pair
86 iroc pass door $30
87 iroc doors $40 pair

Hoods
88 GTA maroon hood $50
88 GTA gunmetal gray hood $80

MONTE CARLO PARTS (or all for 400)
84 stock hood $10
88 fender $75
88 trunk lid, no spoiler $100
88 rear filler pan(in front of trunk) $20
88 pass mirror, manual $15
84 blue rear seat bottom $20
88 maroon fron bucket seats, no drivers seat track, $40 pr
87 monte ss long dash trim/bezel $20
87 maroon glove box $10
+more

FORD BRONCO PARTS (or all for 2200)
NEW fenders 92-96 $80 each
NEW hood 92-96 $100
NEW header panel 92-96 $25
NEW grille 92-96 $50
NEW headlights 92-96 $80 pr
NEW clear side corner lights 92-96 $20
NEW clear front directionals, 1 cracked, $10
NEW front valance(under grille) $20
92-96 used rad support $40
92-96 wiper cowl $20
92-96 chrome front bumper $75
92-96 doors rust free power complete $75 ea
95 hardtop fits 80?-96 $200
95 tailgate, some rust repair needed, no rot through yet, $40
95 spare tire carrier $25
92-96 dash shell, dyed tan, $75
95 center console $30
94-96 gauge cluster w/tach $40
eddie bauer leather seats, front, need cleaning $50 pr
eddier bauer rear leather seat $50
80-96 bronco windsheild, installed new, never driven with, $150
95 eddie bauer stock side steps $50
95 bronco taillights $20
95 bronco rear bumper $20
95 bronco oem rims w/tires $200
80-96 front quad shock mount brackets NEW, 4 pieces, $80
80-96 6" pro-comp lift rear leaf springs $200 pr
80-96 skyjacker 8" front axle drop brackets w.stabalizer bar $120
80-96 skyjacker radius arm 8" drop bracket, 1 side only, $40
80-96 swap bar drop bracket kit $25
80-96 drop pitman arm $25
80-96 extended stainless steel brake lines(3) new, skyjacker $50
95 bronco gas tank $75
95 bronco frame w/stock suspension and bare rot free body tub w/title $300
+more

95 S10 BLAZER 2 DOOR PARTS (or all for 450)
rear seats $40
headliner mint $75
full pass 1/4 panel $200
pass door shell $50
driveshafts, 4.3v6 auto 4wd, $40 pr
gas tank sheild $15
door panels, manual windows, $30 pr
power mirrors, $25 each
rear tailgate trim upper and lower $10 pr
rear top bumper trim $5
wiper fluid tank $5
radiator overflow tank $5
steering column w/wheel and airbag $75
sunvisors $20 pr
a pillar trim $15 pr
+more

Gen 1 DSM eclipse/laser/talon parts (or all for $150)
93 laser front bumper $20
93 laser front fenders, need some minor work, $25 pr
93 laser hood $50
93 laser doors $50 pr
fiberglass front bumper $50
rear low wing w/brake light, center section only, has few holes drilled $10
aluminum dual level import wing, like NEW, $10
gen 1 eclipse/DSM auto fwd non-turbo trans $75

[WayFast84]

you wouldnt happen to have a powerbuldge hood?

[V]

no, right now what you see is what I have, i'll be adding everyday probably so just keep checking back for new stuff.

I will not answer questions regarding parts not on that list. For anything else, PM me or something.

[maroman88]

paul, ill prob give u a call tomarrow if your around, i need the wiper cowl with the squirters and a spare tire and jeck setup

[LT!freak94]

hey can you send pics of the red irock seats front and back to my email at lt1freak94@yahoo.com i may be interested

[chrisfrom nj]

do you still have the fiberglass camaro hood

[V]

chris, yeah i still got it. and tomorrow ill get to the mowers and ill pm you in the evening to see if you wanna stop by sunday(but wait for my PM, lol)

LT1Freak, ill get you good pics tomorrow or sunday when i can pull the seats out and get full shots of them.

ill add more to the LIST later, but here are some shots of random piles in my garage, if you see something that intrests you, speak up... T56s, and some motors are not for sale.

[V]

[V]

[V]

[WayFast84]

was that a dual cat y pipe for thirdgen? or a 4th gen y pipe?

[V]

its a stock LS1 01-02 y pipe. the rare dual cat 3rd gen y pipes still had the cats in the stock location, but just had them side by side.

[chrisfrom nj]

ok paul

[Gio93z]

definatly could use the top large flat part of the dashboard for 93 camaro....has the defrost vent slits inthe center...im sure u know what i mean...let me know if you have one no cracked andin grey....THANKS!

Gio - yellow crashed camaro

[GP99GT]

Originally Posted by SmokingSS

aluminum dual level import wing, like NEW, $10

is this like a big ricer aluminum wing?

how much for just the TPI wiring harness?

???

[V]

as of right now, im still trying to sell the TPI motor/system complete . If i do decide to sell the harness seperate it would be around 175, since it is specific to only 89 systems(maf, no 9th injector).

[z28c4maro82z]

Sent PM's, but didn't get a reply. You still there bud lol. They were more pertaining to the bronco you have

[V]

yea i'm still here, i check this board and email very sparaticlly so soemtimes i may respond within seconds, or soemtiems days. i still ahve all the bronco parts except fort eh front lift kit parts which sold on ebay. i'll PM you tomorrow about the parts you asked about

gio, sorry i dont have that,
matt, yup
chris, sorry i havent got aroudn to the mowers yet, i didnt forget, everythings been hectic and weather last week didnt help, ive been out doing side work for old customers removing trees and branches. but hopefully ill get to it tomorrow.

[BonzoHansen]

Man, you have too much ****.

[WayFast84]

CRAP! Im sorry, I forgot all about the motor!!!

Do you have pics of it? shape of it? How much with out the heads? It can have a lt1 cam installed in it right?

[BLACKZ28]

hey whats up interested in the 305 long block

[2MCHPWR]

hi,
got an ls1 power steering pump?

[LT!freak94]

that fiberglass bumber for the eclipse is that stock look or is it after market