Quote:
Originally Posted by Bandit
did you put on relocation brackets.
|
i figured that i would test it out before i committed to buying relocation brackets. i'm going to be upgrading to a 9 inch rear late spring/early summer and didn't want to have to buy brackets twice.
luckily, i haven't experienced any wheel hop yet, but then again, i only had the car out for a couple days after i put the shocks & springs on (the weather and salty roads chased it back into the garage).
Quote:
Originally Posted by ap2000z28
Also where did you take it to get installed or did you do it yourself? I have strano springs, waiting for the funds to get the revalves.
|
it took me an entire saturday afternoon and part of sunday afternoon to get everything done in my driveway. the only thing i didn't do myself was put the upper shock mount onto the front springs. i didn't want to chew up my springs by putting compressors on them so i took the assembly to my friend's garage and hit it up with an air ratchet (took the better part of 12 seconds each so if you have a compressor, use it otherwise find a friend who has one). i used the writeup on ls1howto.com
good call on saving up money to get properly valved shocks.
