WANTED SLP WRENCH FOR INTAKE RUNNERS! - NJFBOA - Home of New Jersey's Camaros and Firebirds

edpontiac91 · 02-23-2008, 05:04 PM

Does anyone have a SLP wrench for the Intake Runners

It was part number 20034. It is about 6" long and it has a special ball nut on the end to allow it go in at a slight angle and still engage the torx head on the bolts.

trashman01 · 02-23-2008, 06:00 PM

a "wobble" extension wont work?

The Fixer · 02-23-2008, 06:11 PM

I bought a set of wrenches like that at Sears Hardware a few years back; you can check your local one to find out. Here's what they look like - http://www.sears.com/shc/s/p_10153_1...rench+ball+end

TheBandit · 02-23-2008, 06:25 PM

i have them, my dad brought them home from our napa.

edpontiac91 · 02-23-2008, 07:01 PM

Quote:

Originally Posted by TPI Monte SS

I bought a set of wrenches like that at Sears Hardware a few years back; you can check your local one to find out. Here's what they look like - http://www.sears.com/shc/s/p_10153_1...rench+ball+end

The SLP piece is straight. That's so you can use a 3/8" socket wrench on the END to loosen or reinstall the bolts. Also they need to be torqued down. The piece is only $7.00, but handling is $4.95+ONLY $25.00 for a minimum order requirement!

IROCdan330 · 02-23-2008, 08:01 PM

ok so why not go to sears and get a long 3/8" allen wrench socket in the appropriate size with a ball end?

edpontiac91 · 02-23-2008, 08:07 PM

Quote:

Originally Posted by IROCdan330

ok so why not go to sears and get a long 3/8" allen wrench socket in the appropriate size with a ball end?

Didn't know Sears had this kind of stuff. I'll look it up, thanks ED

IROCdan330 · 02-23-2008, 08:08 PM

http://www.sears.com/shc/s/p_10153_1...nd%7CCraftsman

something along those lines, maybe longer if you want, and you probably dont need the entire set...

deadtrend1 · 02-23-2008, 08:32 PM

i think i seen something like them at harbor freight when i was there earlier today

edpontiac91 · 02-23-2008, 10:21 PM

I was able to add a thumbnail in my #5 post. Check it out and see if you think you might buy it at some place like Sears?

Tru2Chevy · 02-23-2008, 10:27 PM

Quote:

Originally Posted by edpontiac91

I was able to add a thumbnail in my #5 post. Check it out and see if you think you might buy it at some place like Sears?

It would prolly be cheaper to just drive down to SLP and pick it up rather than buy more stuff to fill out the minimum order....

- Justin

trashman01 · 02-24-2008, 07:18 AM

u need a hex not a torx, two different bolts, but u can go to sears and get just the one u need. just need to kno the size and also, the ball allens are deff worth having a set of

edit: like this
http://www.sears.com/shc/s/p_10153_1...ball+end+allen

BigAls87Z28 · 02-24-2008, 11:56 AM

TPI uses Torx, not hex.
I can go look at what we have...give me a second.

IROCdan330 · 02-24-2008, 03:47 PM

Quote:

Originally Posted by BigAls87Z28

TPI uses Torx, not hex.
I can go look at what we have...give me a second.

True, but if he has SLP runners and got their bolts to go with them, they are hex.

BigAls87Z28 · 02-25-2008, 12:47 PM

ah well thats a horse of a different color.

SteveR · 02-25-2008, 02:52 PM

Quote:

Originally Posted by Tru2Chevy

It would prolly be cheaper to just drive down to SLP and pick it up rather than buy more stuff to fill out the minimum order....

- Justin

Good idea. The last time I was there they were really cool. If you go, ask them to give you the tour, its worth it

The Fixer · 02-25-2008, 03:40 PM

Quote:

Originally Posted by SteveR

Good idea. The last time I was there they were really cool. If you go, ask them to give you the tour, its worth it

I picked up the rims for the Monte down there to save the shipping, and they were very nice. Do it!