If they are painted or polished this is hands down the best stuff made ....
You will need the gel cleaner not the regular stuff. Get the wheels a little wet soak in the gel let it sit in a cool shady place for 1-2hrs making sure the gel does not dry on the wheel. Brush off with a regular wheel brush and rinse.
There is a point though where brake dust sits so long it perm. stains the wheels and there is nothing you can do except strip and repaint them which is also pretty easily done. The hardest part is masking them up. This was the case with the wheels i bought for my third gen project and they came out looking pretty good.
http://www.njfboa.org/forums/showthread.php?t=36018
__________________
www.JerseyDevilDetails.com
2002 Trans am ws6.. black on black bolt ons with a JS built trans, 3200 stall,TTM's w/315's, full umi adj rear suspension, strano springs/sways, and koni 4/4's
2015 Forester XT touring... STI Sway bars
Last edited by Rich189; 10-01-2008 at 08:11 AM.
|
