If you know roughly what length you will need, NAPA now carries an amazing assortment of pre-flared straight hardlines in various sizes that you can bend up yourself. They might be the brake line flare angle though, I never looked close enough other than how many different pieces they had.
yeah i've used those before but they won't work in this application. thanks for the suggestion though!
Here's a pic of the difference in the dies 45deg on the left 37 deg on the right. The stem used for double flaring is interchangable. But whether doing a single or double flare you need the correct die and cone.
Chris
__________________
1999 Formula 6spd (The driver)
1997 2500 Ext. Cab Dodge 4x4 CTD 5spd (The Earth Mover)
1970 Nova 5spd (The toy)
thanks a ton chris and fml! i thought the 37 was shallower but it also seems that the taper in the die is different. dang nabbit! hopefully i can switch the order around before it ships....
__________________
Last edited by sweetbmxrider; 02-16-2010 at 06:55 PM.
