 |
05-16-2010, 04:13 PM
|
#1
|
Join Date: Nov 2008
Location: Marlton
Posts: 578
|
New Fender
How difficult would it be for one with limited knowledge about a car's body to replace a dented front fender by ones self?
|
|
|
|
05-16-2010, 06:42 PM
|
#2
|
Join Date: Apr 2008
Location: Delran
Posts: 6,785
|
very easy to do. theres bolts under the hood, to the bumper, the splash cover in the wheel well and the bolts inside the door/rocker area. once you get it lined up and the bolts snugged, but not tight you can check to make sure the door doesnt catch on it and adjust it accordingly.
|
|
|
|
|
05-16-2010, 06:46 PM
|
#3
|
Join Date: Jan 2008
Location: Aberdeen,nc/columbus,nj
Posts: 1,449
|
ditto ^ . ive ran into problems with reproduction parts where they dont match up the same as oem so just keep that in mind.
__________________
Eric
07 Silverado 1500 5.3
01 Z28 6 speed
|
|
|
|
|
05-16-2010, 06:48 PM
|
#4
|
Join Date: Apr 2008
Location: Delran
Posts: 6,785
|
oh yeah i forgot there might be a few bolts on the underside of the rocker too
|
|
|
|
|
05-16-2010, 08:11 PM
|
#5
|
Join Date: Nov 2008
Location: Marlton
Posts: 578
|
What about the stuff that is behind the sheet metal? If I take it apart and whatever needs to be replaced behind it, is that stuff just as straightforward? I don't think there should be anything too badly damaged since my headlights, bumper, and hood are all completely in tact. Also, would it be better to get the parts painted before or after installing them? (on the truck or off)
|
|
|
|
|
05-16-2010, 11:21 PM
|
#6
|
Join Date: Apr 2008
Location: Delran
Posts: 6,785
|
theres a big gap between the actual inner fender and the outer fender covering. take off the fender, its most likely if nothing else got dented then its just the outer fender.
|
|
|
|
|
05-18-2010, 04:21 PM
|
#7
|
|
Stalker
Join Date: Aug 2004
Posts: 12,080
|
yea, its very straight forward, it helps when you remove a bolt put it in a certain place or order to remember where it came from
|
|
|
|
|
05-21-2010, 11:39 AM
|
#8
|
|
10 Second Club
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
|
Quote:
Originally Posted by miketa95
What about the stuff that is behind the sheet metal? If I take it apart and whatever needs to be replaced behind it, is that stuff just as straightforward? I don't think there should be anything too badly damaged since my headlights, bumper, and hood are all completely in tact. Also, would it be better to get the parts painted before or after installing them? (on the truck or off)
|
The plastic fender actually has sheet metal riveted to it for support and brackets for bolting it to the car. it all comes off as one piece. I actually had the fender off 2 days ago to fix the alignment. It took about a half hour to remove and re-align it.
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
|
|
|
|
|
05-23-2010, 06:30 PM
|
#9
|
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,476
|
It's pretty easy for someone with basic mechanical skills to swap a fender if you take your time.
I'm pretty sure he's talking about his truck ( http://www.njfboa.org/forums/showthread.php?t=51310), not an F-Body, for those of you giving specific advice.
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
