Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Community Forums > Lounge

Notices


Reply
 
Thread Tools
Old 03-31-2013, 09:44 AM   #1
Jersey_TA
10 Second Club
 
Jersey_TA's Avatar
 
Join Date: Aug 2004
Location: Eastampton
Posts: 4,466
iTrader: (0)
Good news/bad news with the Trans Am

The 21k mile WS6 suspension I installed last night is working awesome. The stock Trans Am suspension from 99 was WAY bad.

And the bad news....

Noticed the rear end seals are leaking....no big deal...new seals. Also noticed fresh oil on my catalytic convertor that wasn't there when I did the oil change in december....no big deal...bad valve cover gasket. I check the oil level only to discover coolant on the dipstick....UGH bad head gasket(s).

Atleast my trip to the ER last night went well.
__________________
1999 MBM T/A - the new ride
2004 CE Corvette - 1.410 - 10.246 @ 133.39
2003 Silverado - Lifted 6 on 35s
2000 T/A WS6 - 11.190 @ 119.79...SOLD

Last edited by Jersey_TA; 03-31-2013 at 05:10 PM.
Jersey_TA is offline   Reply With Quote
Old 03-31-2013, 10:33 AM   #2
JL8Jeff
Hippy Mod, Bergermeister Meisterberger, Moderator
 
JL8Jeff's Avatar
 
Join Date: Aug 2004
Location: Ewing
Posts: 6,216
iTrader: (3)
Quote:
Originally Posted by Jersey_TA View Post
Atleast my trip to the ER last night went well.
I'm afraid to ask but someone needs to. Why were you at the ER last night?
__________________
69 Z28 JL8 4 wheel disc brakes - being restored
09 Silverado Z71
JL8Jeff is offline   Reply With Quote
Old 03-31-2013, 11:03 AM   #3
Jersey_TA
10 Second Club
 
Jersey_TA's Avatar
 
Join Date: Aug 2004
Location: Eastampton
Posts: 4,466
iTrader: (0)
Quote:
Originally Posted by JL8Jeff View Post
I'm afraid to ask but someone needs to. Why were you at the ER last night?
Nothing serious. I was swapping out the rear springs(171k miles lol) and upon lifting the rear spring off the seat the tension shot my wrist down onto the rusted spring seat on the rear end. I had the suspension unloaded, but it was just enough bite me pretty good. Not deep enough for stitches, but doc had to use liquid stitch to hold the cut closed. Doctor made a joke about it too..."now, you didn't try to harm yourself right" lol. He was cool. Minor cut was about 2 inches diagonally across my wrist but the deep part was almost half an inch by 1/8 wide and deep. My buddy saw me stop what I was doing under the car and slowly roll out. He asked me "what did you do", then showed him my wrist and blood dripping on the ground to which he said "nice". He's actually a good friend lol. Ofcourse after I left the hospital I went back to his house and finished the WS6 suspension swap on the rear
__________________
1999 MBM T/A - the new ride
2004 CE Corvette - 1.410 - 10.246 @ 133.39
2003 Silverado - Lifted 6 on 35s
2000 T/A WS6 - 11.190 @ 119.79...SOLD
Jersey_TA is offline   Reply With Quote
Old 03-31-2013, 11:08 AM   #4
deadtrend1
11 second club / Moderator
 
deadtrend1's Avatar
 
Join Date: Aug 2004
Location: West Berlin, NJ
Posts: 7,148
iTrader: (11)
At least you're ok..
__________________
2001 Trans Am WS6 •SLP Loudmouth II •UMI Suspension •12.857 @ 109.57

1996 Trans Am WS6 •Pacesetter Longtubes •Strange 12 Bolt •Spohn Suspension •11.152 @ 123.85
deadtrend1 is offline   Reply With Quote
Old 03-31-2013, 11:14 AM   #5
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,386
iTrader: (3)
Good thing you are Ok. Head gasket sounds fun.
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
'17 Sierra 2500HD Dmax
'17 Lex LS460
Blackbirdws6 is offline   Reply With Quote
Old 03-31-2013, 12:30 PM   #6
stealth355tpi
 
stealth355tpi's Avatar
 
Join Date: Jan 2013
Location: Washington Crossing, PA
Posts: 51
iTrader: (0)
I got a cut on my wrist over a year ago now at work, little bit bigger then what yours sounds like but they used that liquid stuff too. Burned like hell and the doc glued my arm to the table haha. Now it looks like I tried to kill myself by the nasty scar it left because the glue never pulled it together like stitches would have. I tried to talk them into stitching it but they kept saying this would be better and I wouldn't have a scar barely.
__________________
2000 Camaro SS M6 #6244 of 8913
Got BOOST?

stealth355tpi is offline   Reply With Quote
Old 03-31-2013, 01:10 PM   #7
Jersey Mike
Power Member/NJFBOA Bookie/Moderator
 
Jersey Mike's Avatar
 
Join Date: Jun 2009
Location: North Jersey = Best Jersey.
Posts: 4,435
iTrader: (12)
Social Networks:

This is the blue car? Still need to see this thing in person!
__________________

1995 Firebird... Stock-ish.
Quote:
Originally Posted by LS1ow View Post
Good. He microwaved my phone 6 years ago, i hope his intake erupts.
Jersey Mike is offline   Reply With Quote
Old 03-31-2013, 01:21 PM   #8
Featherburner
 
Join Date: Jun 2007
Location: Arm pit of the world... NJ
Posts: 2,677
iTrader: (1)
Quote:
Originally Posted by Jersey_TA View Post
Nothing serious. I was swapping out the rear springs(171k miles lol) and upon lifting the rear spring off the seat the tension shot my wrist down onto the rusted spring seat on the rear end. I had the suspension unloaded, but it was just enough bite me pretty good. Not deep enough for stitches, but doc had to use liquid stitch to hold the cut closed. Doctor made a joke about it too..."now, you didn't try to harm yourself right" lol. He was cool. Minor cut was about 2 inches diagonally across my wrist but the deep part was almost half an inch by 1/8 wide and deep. My buddy saw me stop what I was doing under the car and slowly roll out. He asked me "what did you do", then showed him my wrist and blood dripping on the ground to which he said "nice". He's actually a good friend lol. Ofcourse after I left the hospital I went back to his house and finished the WS6 suspension swap on the rear
You're taking the whole blood, sweat and tears a little too literally.
__________________
John
Featherburner is offline   Reply With Quote
Old 03-31-2013, 04:43 PM   #9
Tru2Chevy
Co-Founder / Site Admin
 
Tru2Chevy's Avatar
 
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,476
iTrader: (8)
Social Networks:

Glad you are ok Rob!

Quote:
Originally Posted by Jersey_TA View Post
I check the oil level oil to discover coolant on the dipstick....UGH bad head gasket(s).
Since the heads are coming off......what new heads/cam are you going with?

- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?

Tru2Chevy is offline   Reply With Quote
Old 03-31-2013, 05:17 PM   #10
Jersey_TA
10 Second Club
 
Jersey_TA's Avatar
 
Join Date: Aug 2004
Location: Eastampton
Posts: 4,466
iTrader: (0)
Quote:
Originally Posted by stealth355tpi View Post
I got a cut on my wrist over a year ago now at work, little bit bigger then what yours sounds like but they used that liquid stuff too. Burned like hell and the doc glued my arm to the table haha. Now it looks like I tried to kill myself by the nasty scar it left because the glue never pulled it together like stitches would have. I tried to talk them into stitching it but they kept saying this would be better and I wouldn't have a scar barely.
He did a pretty good job of holding it closed when he glued it so hopefully there won't be too big of a scar. Military will start asking me questions about trying to harm myself lol.
__________________
1999 MBM T/A - the new ride
2004 CE Corvette - 1.410 - 10.246 @ 133.39
2003 Silverado - Lifted 6 on 35s
2000 T/A WS6 - 11.190 @ 119.79...SOLD
Jersey_TA is offline   Reply With Quote
Old 03-31-2013, 05:20 PM   #11
Jersey_TA
10 Second Club
 
Jersey_TA's Avatar
 
Join Date: Aug 2004
Location: Eastampton
Posts: 4,466
iTrader: (0)
Quote:
Originally Posted by Jersey Mike View Post
This is the blue car? Still need to see this thing in person!
Yep the blue car. I had it at the south meet near deptford at the cool diner we went to. I'll make sure I bring it out more.



Quote:
Originally Posted by Featherburner View Post
You're taking the whole blood, sweat and tears a little too literally.
lol usually I get the normal scrapes and nothing too serious....unlike this one.
__________________
1999 MBM T/A - the new ride
2004 CE Corvette - 1.410 - 10.246 @ 133.39
2003 Silverado - Lifted 6 on 35s
2000 T/A WS6 - 11.190 @ 119.79...SOLD
Jersey_TA is offline   Reply With Quote
Old 03-31-2013, 05:26 PM   #12
Jersey_TA
10 Second Club
 
Jersey_TA's Avatar
 
Join Date: Aug 2004
Location: Eastampton
Posts: 4,466
iTrader: (0)
Quote:
Originally Posted by deadtrend1 View Post
At least you're ok..
"see good in bad, good pharosofee"

Quote:
Originally Posted by Blackbirdws6 View Post
Good thing you are Ok. Head gasket sounds fun.
Thanks Brian. You and me have way different meanings of fun lol.
__________________
1999 MBM T/A - the new ride
2004 CE Corvette - 1.410 - 10.246 @ 133.39
2003 Silverado - Lifted 6 on 35s
2000 T/A WS6 - 11.190 @ 119.79...SOLD
Jersey_TA is offline   Reply With Quote
Old 03-31-2013, 05:27 PM   #13
Jersey_TA
10 Second Club
 
Jersey_TA's Avatar
 
Join Date: Aug 2004
Location: Eastampton
Posts: 4,466
iTrader: (0)
Quote:
Originally Posted by Tru2Chevy View Post
Glad you are ok Rob!

Since the heads are coming off......what new heads/cam are you going with?

- Justin
Thanks Justin. Ya know, it would be a horrible shame to just put a stock cube LS1 back in the car
__________________
1999 MBM T/A - the new ride
2004 CE Corvette - 1.410 - 10.246 @ 133.39
2003 Silverado - Lifted 6 on 35s
2000 T/A WS6 - 11.190 @ 119.79...SOLD
Jersey_TA is offline   Reply With Quote
Old 03-31-2013, 06:19 PM   #14
deadtrend1
11 second club / Moderator
 
deadtrend1's Avatar
 
Join Date: Aug 2004
Location: West Berlin, NJ
Posts: 7,148
iTrader: (11)
Quote:
Originally Posted by Jersey_TA View Post
Thanks Justin. Ya know, it would be a horrible shame to just put a stock cube LS1 back in the car
This gonna be good!
__________________
2001 Trans Am WS6 •SLP Loudmouth II •UMI Suspension •12.857 @ 109.57

1996 Trans Am WS6 •Pacesetter Longtubes •Strange 12 Bolt •Spohn Suspension •11.152 @ 123.85
deadtrend1 is offline   Reply With Quote
Old 03-31-2013, 07:12 PM   #15
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,386
iTrader: (3)
Quote:
Originally Posted by Jersey_TA View Post
"see good in bad, good pharosofee"



Thanks Brian. You and me have way different meanings of fun lol.
I had a lot of sarcasm in that comment....
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
'17 Sierra 2500HD Dmax
'17 Lex LS460
Blackbirdws6 is offline   Reply With Quote
Old 03-31-2013, 08:28 PM   #16
Jersey_TA
10 Second Club
 
Jersey_TA's Avatar
 
Join Date: Aug 2004
Location: Eastampton
Posts: 4,466
iTrader: (0)
Quote:
Originally Posted by Blackbirdws6 View Post
I had a lot of sarcasm in that comment....
Yeah I know lol
__________________
1999 MBM T/A - the new ride
2004 CE Corvette - 1.410 - 10.246 @ 133.39
2003 Silverado - Lifted 6 on 35s
2000 T/A WS6 - 11.190 @ 119.79...SOLD
Jersey_TA is offline   Reply With Quote
Old 03-31-2013, 08:30 PM   #17
Jersey_TA
10 Second Club
 
Jersey_TA's Avatar
 
Join Date: Aug 2004
Location: Eastampton
Posts: 4,466
iTrader: (0)
Quote:
Originally Posted by deadtrend1 View Post
This gonna be good!
something "streetable"
__________________
1999 MBM T/A - the new ride
2004 CE Corvette - 1.410 - 10.246 @ 133.39
2003 Silverado - Lifted 6 on 35s
2000 T/A WS6 - 11.190 @ 119.79...SOLD
Jersey_TA is offline   Reply With Quote
Reply

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Community Forums > Lounge


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 12:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.