 |
|
10-14-2019, 02:09 PM
|
#2301
|
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,534
|
Quote:
Originally Posted by Blackbirdws6
Congrats on not burning the car down. Did you get an x-ray on the welds?
|
i did, heres how they looked.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
|
10-15-2019, 08:23 PM
|
#2302
|
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,534
|
So 2 problems have been uncovered in the past 24 hours.
1. I must have messed up the nitrous wiring, nothing is getting power. Going to check over everything tommorow and if need be just start from scratch and build new harnesses.
2. Car has a coolant leak from the thermostat housing. Ended up draining coolant and pulling housing off. Chased threads to make sure everything was good. (Tiny aluminum bolts into aluminum housing) and reapplied a gasket and torqued down. Refilled coolant. Still leaking. Upon further inspection, housing has a crack in it. New billet unit has been overnighted from summit.
Didn’t want to dig into nitrous wiring tonight, want to do it all in 1
Shot so I don’t mess anything up. So instead I spent another hour or so redoing the carpet that was removed to do the cage. Doing Ozite again so it’s not terrible, driver side and passenger side seat and foot area done. Rear hatch and back seat area will be completed after nitrous problems are solved
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
|
|
10-16-2019, 09:15 AM
|
#2303
|
|
11 sec club
Join Date: Aug 2014
Location: Woodbridge
Posts: 834
|
Nitrous tuning at the track or on the dyno?
__________________
99 Z28 Trick Flow 215s milled to 61cc 228/232 Cam Fast 102 built 4l65e trans 4000 converter 12 bolt 410s Electric WP deleted PS/AC Dyno & Track tuned
2015 ATS Coupe. AWD 2.0 Turbo
2012 2500hd Silverado with LTZ 20s on 35x12.5x20
86 Buick GN Lesabre 1 of 117 (4-Sale)
|
|
|
|
|
10-16-2019, 09:25 AM
|
#2304
|
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,534
|
Quote:
Originally Posted by MDSheds_SS
Nitrous tuning at the track or on the dyno?
|
Dyno.
Maybe at the track to if the current dosage isnt enough to outrun ya 
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
|
|
10-16-2019, 12:06 PM
|
#2305
|
|
11 sec club
Join Date: Aug 2014
Location: Woodbridge
Posts: 834
|
Shouldn’t be a problem out running me. No new mods unfortunately
__________________
99 Z28 Trick Flow 215s milled to 61cc 228/232 Cam Fast 102 built 4l65e trans 4000 converter 12 bolt 410s Electric WP deleted PS/AC Dyno & Track tuned
2015 ATS Coupe. AWD 2.0 Turbo
2012 2500hd Silverado with LTZ 20s on 35x12.5x20
86 Buick GN Lesabre 1 of 117 (4-Sale)
|
|
|
|
|
10-21-2019, 08:53 AM
|
#2306
|
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,534
|
doot doot.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
|
|
10-21-2019, 08:56 AM
|
#2307
|
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,389
|
Looks expensive
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
'17 Sierra 2500HD Dmax
'17 Lex LS460
|
|
|
|
|
10-21-2019, 08:57 AM
|
#2308
|
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,534
|
Quote:
Originally Posted by Blackbirdws6
Looks expensive
|
expensive, not really. Going to be costly, you bet.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
|
|
10-21-2019, 10:38 AM
|
#2309
|
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,941
|
Yessssssss 
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
|
|
10-21-2019, 12:34 PM
|
#2310
|
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
Crop. Your. Pictures
|
|
|
|
|
10-21-2019, 03:21 PM
|
#2311
|
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,534
|
Quote:
Originally Posted by PolarBear
Crop. Your. Pictures
|
its a screenshot of a video my good sir.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
|
|
10-21-2019, 04:39 PM
|
#2312
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,668
|
Better?
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
|
|
|
|
|
10-21-2019, 07:31 PM
|
#2313
|
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,941
|
Post is wrong, like yo wiring
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
|
|
10-21-2019, 09:12 PM
|
#2314
|
|
10 Second Club / Meet Coordinator
Join Date: Dec 2004
Location: Roxbury, NJ
Posts: 2,144
|
TWO purge lines for a single stage kit ??!
__________________
1987 IROC-Z - modified
|
|
|
|
|
10-21-2019, 09:31 PM
|
#2315
|
Join Date: Jun 2007
Location: Arm pit of the world... NJ
Posts: 2,677
|
Quote:
Originally Posted by Blackbirdws6
Did you get an x-ray on the welds?
|
I think they need a cut and etch! 
__________________
John
|
|
|
|
|
10-21-2019, 10:11 PM
|
#2316
|
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,534
|
Quote:
Originally Posted by IROCZman15
TWO purge lines for a single stage kit ??!
|
Bro, everything is for the gram.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
|
|
10-21-2019, 10:13 PM
|
#2317
|
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,534
|
Also, having issues with the Efans. Tore into it today but didn’t have time to finish.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
|
|
10-22-2019, 06:21 PM
|
#2318
|
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
Quote:
Originally Posted by LS1ow
its a screenshot of a video my good sir.
|
A screenshot is still a picture. It takes seconds to be a decent poster 
|
|
|
|
|
10-22-2019, 07:05 PM
|
#2319
|
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,941
|
Quote:
Originally Posted by LS1ow
Also, having issues with the Efans. Tore into it today but didn’t have time to finish.
|
Did you check the tune yet?
Have someone with HPT manual cycle on fans in the interface to verify your pin choice was right.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
|
|
10-22-2019, 07:42 PM
|
#2320
|
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,534
|
Quote:
Originally Posted by LTb1ow
Did you check the tune yet?
Have someone with HPT manual cycle on fans in the interface to verify your pin choice was right.
|
Nah. I don’t have HPT myself so need to wait for Tooooner. Hopefully tmmr.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
|
|
10-24-2019, 10:00 AM
|
#2321
|
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,534
|
t'was the tune
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
|
|
10-24-2019, 10:19 AM
|
#2322
|
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,941
|
rOWDY BURNOUT TIME??
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
|
|
10-24-2019, 03:14 PM
|
#2323
|
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,534
|
Quote:
Originally Posted by LTb1ow
rOWDY BURNOUT TIME??
|
attempting to set sway bar first. which is turning out to be a pain.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
|
|
10-24-2019, 03:42 PM
|
#2324
|
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,941
|
Quote:
Originally Posted by LS1ow
attempting to set sway bar first. which is turning out to be a pain.
|
Yea no idea how to set that thing. Always let Kirk work magic on it. Although my car never had the gangster lean he had on his old car. 
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
|
|
10-24-2019, 09:10 PM
|
#2325
|
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,534
|
Quote:
Originally Posted by LTb1ow
Yea no idea how to set that thing. Always let Kirk work magic on it. Although my car never had the gangster lean he had on his old car. |
I listed to his instruction, it’s just a bitch Bc it’s a small space.
No room in there with the 315s and the drag set up isn’t much small. But I did just think of putting the front runners on be back. That’ll give me plenty of room to reach in there and adjust the link
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
