 |
|
08-18-2006, 01:24 PM
|
#26
|
|
8 Second Club
Join Date: Jun 2006
Posts: 4,315
|
thanks for your help JR1 well let you know how we make out.
|
|
|
|
08-18-2006, 04:13 PM
|
#27
|
|
9 Second Club
Join Date: Jun 2006
Location: Brick, Nj
Posts: 23
|
Thanks JR1, we have moroso upper and lower motor mounts on it. I am thinking its an outter tie rod. I will likely replace them with edquay rod end tie rods to get rid of the toe in while the front end is up. Are your lca's chrmo or mild steel? I see that the lower mounts are mig welded on to it. I planned on doing it the same as you have it. How much droop should i look for when i weld the upper tabs up? Im going to do the limiters and try launching at a lower rpm around 3500 and see how it goes. After i get it straightened out ill pull the limiters and turn the launch rpm back up and let her fly again for some photos.
__________________
1/4-9.356@143.25 -- 1/8-5.94@115.7--60ft.-1.29 150 HP N20 off transbrake
Scott Shafiroff built 434 Motown block,Dart intake, Callies crank, JE pistons,Crower lifters, Comp cam solid roller, 12:1 comp AFR 227 heads, Lunati Pro Mod rods,1095 Race Demon,Stahl 2" stepped headers,PA tubular k-member and a-arms, ATI powerglide w/ati supercase,1.87 Straight cut gear set,ATI 5000 stall, moser 9" 4:11's w/spool 40 spline axles, Denny's DS
|
|
|
|
|
09-08-2006, 09:26 PM
|
#28
|
|
9 Second Club
Join Date: Jun 2006
Location: Brick, Nj
Posts: 23
|
JR1, front end limiters worked out great. 1.31 60' foot & 1/2 off almost to the 60' mark.
__________________
1/4-9.356@143.25 -- 1/8-5.94@115.7--60ft.-1.29 150 HP N20 off transbrake
Scott Shafiroff built 434 Motown block,Dart intake, Callies crank, JE pistons,Crower lifters, Comp cam solid roller, 12:1 comp AFR 227 heads, Lunati Pro Mod rods,1095 Race Demon,Stahl 2" stepped headers,PA tubular k-member and a-arms, ATI powerglide w/ati supercase,1.87 Straight cut gear set,ATI 5000 stall, moser 9" 4:11's w/spool 40 spline axles, Denny's DS
|
|
|
|
|
09-08-2006, 10:10 PM
|
#29
|
|
Keyboard Tough Guy
Join Date: Jul 2004
Location: Trenton, NJ
Posts: 6,341
|
to make this thread less sucky heres some vid of your car doing a wheelstand
http://www.thevettedoctors.com/video...wheelstand.wmv
oops nm thats the 7 second vette doing one hehe
|
|
|
|
|
09-08-2006, 11:44 PM
|
#30
|
|
8 Second Club
Join Date: Jun 2006
Posts: 4,315
|
bawaaaaaa i have been hoping that maybe someone there happened to get it on video and post it.
when i read the post i got wood  then limp in a sec, lol btw ours was better then that imo
|
|
|
|
|
09-09-2006, 03:23 PM
|
#31
|
Join Date: Jan 2005
Location: easton,pa
Posts: 535
|
Well,if i had a video of the wheelstand from last year, i had the car straight up bumper scraping till the end of the consession stand at Island Dragway, ask anyone there, its true. its sucks when everybody wants to watch me go instead of taping it.
Plus now i'm going to tape every run, now i got a video camera inside the car.
If anyone needs a video camera mount for inside your car, ( www.ioportraing.com). JR1.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
