Hmm...What should I do? - UPDATE - NJFBOA - Home of New Jersey's Camaros and Firebirds

Tru2Chevy · 02-01-2006, 12:09 PM

Story: Someone at work was selling Craftsman toolboxes that were new but damaged (just a few small dents). The one I picked out is here:

http://www.sears.com/sr/javasr/produ...s+%26+Cabinets

When I first went to look at it, she didn't have the model number, so we looked it up in the Sears catalog and we thought we found a match with one that cost $420. We agreed upon a price of $300 for the one she was selling.

I have already paid for this box and I picked it up last night. I looked it up again on the website this morning to show it to a co-worker, and I found out that I had original picked the wrong box out of the catalog. The original price wasn't $420, it was only $350.

I'm debating on sending her the following e-mail to see how she responds:

Hello,

I just wanted to let you know (not that it matters now) that I did manage to find the toolbox that I bought from you on their website:

http://www.sears.com/sr/javasr/produ...s+%26+Cabinets

It's the only 11-drawer box that they offer in that size.

Good luck selling the last one!

Do you guys think I should send it and see if she mentions the price, or just not bother?

- Justin

NJSPEEDER · 02-01-2006, 12:19 PM

send it, you still got a good deal. saving $50 because of a few minor dings is fair.
the worse thing she can do is say that you made the deal and stick to the price you already got, best thing she coudl do is offer a little bit more off to be "fair" about it.
either way you got a pretty good deal on it.

bad64chevelle · 02-01-2006, 12:29 PM

Im with Tim, whats the worst she can say. I mean you can probably even fix the dents if you really wanted to take the time to do it. Still a fair price. Put some Summit, Jegs or whatever stickers over the dents and youre as good as new.

SteveR · 02-01-2006, 12:29 PM

I say send it, why not. What part number are they? Do you think she'll sell me the rest for $250?

JL8Jeff · 02-01-2006, 12:38 PM

I would send an email saying that it wasn't the model that both of you thought it was. Then show her which one it ts and the price to see if she offers you a discount or to return your money. Just make sure you point out that both of you thought it was a different model. I just ran into a similar situation over a compressor. The people thought it was a more expensive model but I eventually found out what it was and they were bummed it was worth a lot less.

Tru2Chevy · 02-01-2006, 12:40 PM

Quote:

Originally Posted by JL8Jeff

I would send an email saying that it wasn't the model that both of you thought it was. Then show her which one it ts and the price to see if she offers you a discount or to return your money. Just make sure you point out that both of you thought it was a different model. I just ran into a similar situation over a compressor. The people thought it was a more expensive model but I eventually found out what it was and they were bummed it was worth a lot less.

I think this may be the best way to approach it. I'll just add a line in to the e-mail saying that we both thought it was the wrong one. If she offers a discount, great, if not, oh well - I still paid $50 under retail.

- Justin

Tru2Chevy · 02-01-2006, 01:13 PM

Oh well, she's acting like she doesn't want to budge on the price.

I guess it was worth a shot. Now I just have to get the key from Sears and start loading up all my tools

- Justin

79CamaroDiva · 02-01-2006, 01:56 PM

she didnt have the key?

Tru2Chevy · 02-01-2006, 02:06 PM

Quote:

Originally Posted by 79CamaroDiva

she didnt have the key?

Nope, I picked the only one that she didn't have the key for (she had four altogether).

Her son picked up a bunch of damaged Sears merchandise for one lump sum, and they are selling it all off. At least that's the story I got and it sounds good enough to me.

- Justin

Brando56894 · 02-01-2006, 02:59 PM

its a hard decision id say send it too, either way you still got a pretty good deal on it

Squirrel · 02-01-2006, 07:34 PM

the answer to any what should i do question:
....PIITB

for relevance, even if its stolen at least you got a good price

BigAls87Z28 · 02-01-2006, 07:50 PM

50 bucks off is close to what my discount would have been, so I say good deal.

Tru2Chevy · 02-01-2006, 11:59 PM

Quote:

Originally Posted by BigAls87Z28

50 bucks off is close to what my discount would have been, so I say good deal.

Hey Al, can I show up at the local sears and grab a key from them, or do I have to find time to call them in the middle of the day to order one? I have the code from the lock already....

- Justin

BigAls87Z28 · 02-02-2006, 12:51 AM

probably can call your local sears and they can have one either shipped too you or to the store for you to pick up. Im not sure how that works. They do have lock replacements in the store, they might just give you one of thoes.

Tru2Chevy · 02-02-2006, 10:00 AM

Quote:

Originally Posted by BigAls87Z28

probably can call your local sears and they can have one either shipped too you or to the store for you to pick up. Im not sure how that works. They do have lock replacements in the store, they might just give you one of thoes.

Ok, thanks. I'll try giving them a call today and see what they say.

- Justin

Untamed · 02-02-2006, 10:33 AM

I think you should fix your Camaro and get it running, then put the new tool box in the trunk for emergency tools.

JL8Jeff · 02-02-2006, 11:27 AM

Quote:

Originally Posted by Untamed

I think you should fix your Camaro and get it running, then put the new tool box in the trunk for emergency tools.

Yeah, but what if he locks the car keys in the toolbox in the trunk?

Tru2Chevy · 02-02-2006, 12:52 PM

Quote:

Originally Posted by Untamed

I think you should fix your Camaro and get it running

....and lose the best lawn ornament on the block? I don't think so mister.

The toolbox is just a way to actually put the several hundred dollars worth of tools that are boxed up in my basement to good use (like fixing the car).

- Justin

jims69camaro · 02-02-2006, 09:23 PM

does an eleven drawer fit in your hatch area?

WayFast84 · 02-02-2006, 09:26 PM

yeah a few stickers will do the trick!! Hell I have enough stickers here to get me into the 16's!(haha) you can have some if you like...most of them are jegs, summit and hedman...

Tru2Chevy · 02-03-2006, 10:17 AM

Quote:

Originally Posted by jims69camaro

does an eleven drawer fit in your hatch area?

I may fit in the car since the rear sets are out. It's 26.5" wide, 18" deep, and 41" tall.

- Justin

Tru2Chevy · 02-13-2006, 12:56 PM

Update:

I got the keys for the box in the mail on Saturday. I was all excited, so I ran straight out to the garage to open up the box and starting filling it with tools. Slide the key in, turn the lock, nothing.....WTF. After checking it, I realize that the lock cylinder is turning way to easily for the locking bar to be moving. This morning, another e-mail sent to the lady I bought it from:

Quote:

Hello Denise,

I have a problem. I finally received the keys for the toolbox from Sears in the mail on Saturday, however the lock is broken. I have the correct keys, and they turn the lock just fine, however the lock cylinder does not seem to be connected to the actual locking bars in the toolbox at all. I think it may have been damaged when it was dropped or hit to get those dents that it has.

I do realize this is not your fault, as you didn't have the keys to test the toolbox, however it was sold to me as a working toolbox that just had a few dents and was missing keys, which is not the case.

What do you think we can do about this matter?

Response:

Quote:

Do you know the model number? Is it the same model number that you sent me that time on the site?

I'm sorry about the chest. I can't believe the darn lock won't work. Did you get the chest opened at all or is it that broken that it doesn't open?

My reply:

Quote:

It is this box, but in black instead of red. I don't know if the black one is a different model number or not.

http://www.sears.com/sr/javasr/produ...s+%26+Cabinets

I haven't been able to get it opened at all. When you turn the lock with the key, you can feel that there is no resistance at all, so I would assume that the bars that slide to lock and unlock the drawers are not attached to the lock mechanism. I don't know of any other way of getting the box open.

And her most recent response:

Quote:

Ok, thanks. I want to check something out and I'll get back to you.

I'm not quite sure what she is checking on, but I am pretty much determined to either get my money back, or at the very least get her to replace the box.

- Justin

Savage_Messiah · 02-13-2006, 01:40 PM

good luck

WayFast84 · 02-13-2006, 05:28 PM

I say give the tool box to me JK find some one who bought the exzact same box and ask them to exchange it for you, or go to sears and ask for the box to be fixed and you are verry unhappy with the product but lost the receipt..

Tru2Chevy · 02-13-2006, 05:31 PM

There's no way I could take it back to sears the way it is. For now I'm gonna hold out hope that this lady is gonna make things right. If she doesn't come up with something by lunch time tomorrow then I'll start pestering her.

- Justin