 |
10-17-2007, 11:52 PM
|
#1
|
Join Date: Oct 2004
Location: Hillsdale, NJ
Posts: 168
|
FS 1998 Trans am
I am selling the Trans am because I moved in with my gf and I have no where to keep it. the odometer reads around 102,000 miles. Tires have about 50% tread on them, brakes are BRAND new hawk hps and brembo rotors, they are full metallic and so they are a bit noisy but they stop on a dime.All the mods are in my sig. Overall the car runs well there are no operational issues.
-all the work has been done professionally and well.
-I recently had a moser 12 bolt installed and the sensor for the e-brake and abs didn't have fittings so the lights are on
-The car has less then 102,000 miles but with the new 3:73 gears the speedo is reading higher then it should be so It needs to be recalibrated, all you need is a plug in tuner.
-tear in the driver seat leather, easily fixed by a Pontiac dealership.
I am asking $7500 and I am firm on it
If you have any question please email me at EricR82@gmail.com or just reply in the thread
__________________
1998 Transam Chameleon -- SOLD
1981 Trans am Pontiac 400, TH350 -In progress
Bored .060 over, speed pro forged pistons, cat H braun rods, STOCK CRANK CUT .010 .010, ROLLER timing chain, melling 60lb oil pum, comp lifters, comp push rods .080 wall, speed pro molly rings, #62 heads fully ported, stainless valves 2.11X1.77,comp springs and retainers, clevitte bearings, Melling SPC-7 camshaft RAIII, QJ carb 700 cfm
|
|
|
|
10-18-2007, 08:40 AM
|
#2
|
|
Guest
|
1/4 time? good choice on the stall btw
|
|
|
|
|
10-18-2007, 06:49 PM
|
#3
|
Join Date: Feb 2005
Location: Orange County NY
Posts: 579
|
trade for a h/c fourmula?
__________________
2000 Camaro 25.5 Turbo car  X275
|
|
|
|
|
10-18-2007, 08:37 PM
|
#4
|
Join Date: Dec 2005
Location: Boston/North
Posts: 9,214
|
Quote:
Originally Posted by 1984camaroz28
trade for a h/c fourmula?
|
he just said he's selling b/c he's got no room to keep the car...
__________________
Quote:
Originally Posted by BonzoHansen
dumbass.
|
|
|
|
|
|
10-19-2007, 09:08 PM
|
#5
|
Join Date: Oct 2004
Location: Hillsdale, NJ
Posts: 168
|
Yea I need to sell it, sorry.
Also I forgot to mention that I installed a puch button start from a Honda S2000. I will try to get pictures up this weekend if the weather improves.
__________________
1998 Transam Chameleon -- SOLD
1981 Trans am Pontiac 400, TH350 -In progress
Bored .060 over, speed pro forged pistons, cat H braun rods, STOCK CRANK CUT .010 .010, ROLLER timing chain, melling 60lb oil pum, comp lifters, comp push rods .080 wall, speed pro molly rings, #62 heads fully ported, stainless valves 2.11X1.77,comp springs and retainers, clevitte bearings, Melling SPC-7 camshaft RAIII, QJ carb 700 cfm
|
|
|
|
|
10-19-2007, 11:22 PM
|
#6
|
|
14 Second Club
Join Date: Feb 2007
Location: New Milford
Posts: 650
|
where in clifton do you live?
__________________
FAA Airframe and Powerplant Mechanic - Republic Airlines
-1980 Trans Am ZZ383 stroker
-2012 Ford Focus 5spd
-1989 Harley Softail Custom
-2000 Trans Am, M6, WS6 *SOLD* *RIP*
|
|
|
|
|
10-21-2007, 02:44 PM
|
#7
|
Join Date: Oct 2004
Location: Hillsdale, NJ
Posts: 168
|
off of van houten, close to ttp performance, they are the ones who did the work on my car, all except the rear. Back when they were in old tappan and saddle brook.
__________________
1998 Transam Chameleon -- SOLD
1981 Trans am Pontiac 400, TH350 -In progress
Bored .060 over, speed pro forged pistons, cat H braun rods, STOCK CRANK CUT .010 .010, ROLLER timing chain, melling 60lb oil pum, comp lifters, comp push rods .080 wall, speed pro molly rings, #62 heads fully ported, stainless valves 2.11X1.77,comp springs and retainers, clevitte bearings, Melling SPC-7 camshaft RAIII, QJ carb 700 cfm
Last edited by transamws686; 10-21-2007 at 02:45 PM.
|
|
|
|
|
10-24-2007, 03:06 PM
|
#8
|
Join Date: Oct 2004
Location: Hillsdale, NJ
Posts: 168
|
Looking to sell it quickly,I just picked up a 2007 GP. I can go as low as $6500. pm or email me at Ericr82@gmail.com
__________________
1998 Transam Chameleon -- SOLD
1981 Trans am Pontiac 400, TH350 -In progress
Bored .060 over, speed pro forged pistons, cat H braun rods, STOCK CRANK CUT .010 .010, ROLLER timing chain, melling 60lb oil pum, comp lifters, comp push rods .080 wall, speed pro molly rings, #62 heads fully ported, stainless valves 2.11X1.77,comp springs and retainers, clevitte bearings, Melling SPC-7 camshaft RAIII, QJ carb 700 cfm
|
|
|
|
|
01-22-2008, 02:08 PM
|
#9
|
Join Date: Oct 2004
Location: Hillsdale, NJ
Posts: 168
|
Just going to bump it.
__________________
1998 Transam Chameleon -- SOLD
1981 Trans am Pontiac 400, TH350 -In progress
Bored .060 over, speed pro forged pistons, cat H braun rods, STOCK CRANK CUT .010 .010, ROLLER timing chain, melling 60lb oil pum, comp lifters, comp push rods .080 wall, speed pro molly rings, #62 heads fully ported, stainless valves 2.11X1.77,comp springs and retainers, clevitte bearings, Melling SPC-7 camshaft RAIII, QJ carb 700 cfm
|
|
|
|
|
01-22-2008, 05:34 PM
|
#10
|
Join Date: Mar 2005
Location: nj
Posts: 248
|
i'm going to guess its the same car in your sig? if it was a 6speed, i'd buy it right now. bump
__________________
2018 vw golf r m6
2005 subaru outback m5
1999 camaro ss heads/cam m6
Previous
1999,, 2001, 2002 Chevy camaro ss, 1998 camaro z28, 2013 camaro 1le twin turbo all m6
|
|
|
|
|
01-24-2008, 11:56 AM
|
#11
|
Join Date: Oct 2004
Location: Hillsdale, NJ
Posts: 168
|
Yes same car as in the sig.
__________________
1998 Transam Chameleon -- SOLD
1981 Trans am Pontiac 400, TH350 -In progress
Bored .060 over, speed pro forged pistons, cat H braun rods, STOCK CRANK CUT .010 .010, ROLLER timing chain, melling 60lb oil pum, comp lifters, comp push rods .080 wall, speed pro molly rings, #62 heads fully ported, stainless valves 2.11X1.77,comp springs and retainers, clevitte bearings, Melling SPC-7 camshaft RAIII, QJ carb 700 cfm
|
|
|
|
|
03-04-2008, 07:53 AM
|
#12
|
Join Date: Oct 2004
Location: Hillsdale, NJ
Posts: 168
|
asking $6500 for it.
__________________
1998 Transam Chameleon -- SOLD
1981 Trans am Pontiac 400, TH350 -In progress
Bored .060 over, speed pro forged pistons, cat H braun rods, STOCK CRANK CUT .010 .010, ROLLER timing chain, melling 60lb oil pum, comp lifters, comp push rods .080 wall, speed pro molly rings, #62 heads fully ported, stainless valves 2.11X1.77,comp springs and retainers, clevitte bearings, Melling SPC-7 camshaft RAIII, QJ carb 700 cfm
|
|
|
|
|
03-06-2008, 04:17 PM
|
#13
|
|
12 Second Club
Join Date: Nov 2004
Location: Haddon Twp NJ
Posts: 2,213
|
is the car sold yet if not can i get pics
________
GRANNY SEX
Last edited by 69BirdX; 04-02-2011 at 11:45 PM.
|
|
|
|
|
03-06-2008, 05:55 PM
|
#14
|
Join Date: Oct 2004
Location: Hillsdale, NJ
Posts: 168
|
Ty for the email. I sent you pictures.
__________________
1998 Transam Chameleon -- SOLD
1981 Trans am Pontiac 400, TH350 -In progress
Bored .060 over, speed pro forged pistons, cat H braun rods, STOCK CRANK CUT .010 .010, ROLLER timing chain, melling 60lb oil pum, comp lifters, comp push rods .080 wall, speed pro molly rings, #62 heads fully ported, stainless valves 2.11X1.77,comp springs and retainers, clevitte bearings, Melling SPC-7 camshaft RAIII, QJ carb 700 cfm
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
