LT1 turbo parts. NEW and used. trickflow 195cc heads, 65# injectors, MORE

[Tagz]

Turbo - Precision T76 - $900
T76 GTS. 3500 miles on it.

http://www.angelfire.com/biz4/tagz/turbo1.JPG
[B]http://www.angelfire.com/biz4/tagz/turbo2.JPG
http://www.angelfire.com/biz4/tagz/turbo3.JPG
http://www.angelfire.com/biz4/tagz/turbo4.JPG



Wastegate - $250 - Tial 44mm Wastegate. Like new. Black. was on the car for 5 minutes. I used the flanges that get welded onto the pipe.. Comes with the v-clamps though.

http://www.angelfire.com/biz4/tagz/wastegate.JPG



Blow off Valve - $150 -Tial 50mm. Black. i used the flange that gets welded to the pipe but it does come with the v-band clamp.

http://www.angelfire.com/biz4/tagz/bov.JPG
(sorry for the bad pic, let me know if you want another)



Injectors - $400 - Precision 65 pound injectors. Brand new, ran on the car for 5 minutes tops.

http://www.angelfire.com/biz4/tagz/injectors.JPG



Silicone Couplings - Make me an offer -
There are 5 3" couplings, and one 3 - 3.5" reducer. have stainless T-bolt clamps for all ends.

http://www.angelfire.com/biz4/tagz/coupling.JPG



Intercooler. - $125 -
3 inch in, 3 inch out. Will post pics of that as soon as i take them... i think its a 24 x 14 x 3. can't remember off hand.


I also have 355 Shortblock LT1 built for boost for sale. I was a brand new rebuild with all new parts. I am going to have it looked over by my engine shop to make sure everything is okay on it. It ran for 5 mintues and i had a head gasket leak (cometic gaskets.. go figure). Its been sitting for a few months now so i'm going to have them tear it down, check the bearings, torque everything and reassemble it so i can be sure i'm selling a quality motor. Heres what is in it:

Scat Forged crank.
Scat Forged H-Beam rods
JE Extreme duty forged pistons. -22cc dish
Program 4 bolt 22* splayed main caps.
ARP main studs.
keyed crank hub.

Parts alone are worth 2500... Plus over 2000 in machining and assembly. I'm gunna be asking 2500 for everything. Keep in mind i'm haivng it checked out before selling it by my local machine shop.



Please contact me at Rathershort@gmail.com , PM me, or post here. thanks. Feel free to hit me up on Aim ar RatherShort

[sweetbmxrider]

for some reason the links don't work for me, at least the one's i tried

[Tru2Chevy]

Originally Posted by sweetbmxrider

for some reason the links don't work for me, at least the one's i tried

Copy the links and paste them in a new window......you just can't hotlink them.

- Justin

[Tagz]

I had this posted on another form. They didn't work. then they magically started to work. lol, like tru2chevy said, copy and paste.

[Tagz]

Updated, heads have been sold. everything else is still here and reallllly has to go