Selling my Direct Port setup in an lt1 intake with stand alone fuel system.
Nitro Dave's very own lt1 intake so you know it was done right.
Intake is opened up for a 58mm throttle body and is powder coated black. Runners are tapped and lightly ported for the 8 NX nozzles. Has 3 Ice-man Pure flow nitrous solenoids for the injection rails and purge. Fuel noids are large NX brand fuel solenoids. Custom mounted atop the Lt1 intake through stock fuel rails with an adjustable fuel pressure regulator. Fuel system is a 1 gallon plastic fuel cell with an inline filter, a holley fuel pump, and holley adjustable fuel pressure regulator. Fuel pressure gauge and fuel pressure safety switch mounted in system. Includes all braided lines to go from bottle to noids, rails to nozzles, noids to purge, fuel pump to regulator, regulator to noids, and tank to regulator. Includes all jets needed for a 200 and a 300 shot. Also has micro wot switch and two toggle switches. This couldn't be a more complete direct port setup for an lt1. Add a bottle, bolt it up, wire it together, and drop a
few seconds at the track!!
Price is $1450 as it sits. If buyer is interested, I can include a coil of 3/16 stainless steel line and the necessary an fittings to switch out the braided injection rail lines for an addition $125.
Taking a good hit on this setup so my loss is a huge gain!
Begin intake porn
http://nitrousoutlet.com/installs/install.asp?id=14
my plans with the stainless line
