 |
|
10-24-2010, 10:29 PM
|
#1
|
Join Date: Nov 2005
Location: North Jersey
Posts: 563
|
basement garage sale
Gave up my storage units so i have everything in my cousins basement....can only keep this stuff there temporary...... will sell seperate or 2000 for everything per forum rules
Chevy/gm
LSx belt tensioners
3rd gen camaro/firebird blower motor
3rd gen ecm ecu camaro/firebird airbag computer...
3rd gen camaro ecm….350 tpi… has a jet chip in it.. 1989 and before…
4th gen camaro b4c taillights with police strobes, front strobes, and controller box...
350 bored .030 over 4 bolt main block....638 block with .030 forged trw pistons
gm heads.... 1.94 1.52 valved
1968 Camaro fender BRAND NEW
1968 camaro fender original (needs some work)
1970-1976 (1971) Camaro glove box door mint…
1968-1972 Chevelle stereo dash pad…
1968-72 a-body bumper jacks….
1968-72 Door glass…
1968-72 Radiator support MINTT
8.2 inch A body rear... 10 bolt... just the case and chrome cover nothing in it.... axle tubes and ends all welded up…..
Garrett 88mm 88 mm inducer 6 inch inlet 4 inch outlet
Garrett 91mm 91 mm inducer 6 inch inlet…. I will include a large rear housing but needs a smaller one for tight cars (150-200 bucks depending on what you need)
hypercoils
1814B0175
2.5" x 14" x 175 Pound Spring
LIKE turbonetics waste gate control valve
grand national champion racing products pushrods
grand national wire harness with provisionsfor F.A.S.T. standalone
grand national EGT probe for tailpipe
grand national alcohol/methanol injection kit
grand national electric fan with shroud….
edelbrock pn 8504 intake bolts
used flex fan spacer
crane cams graphite cam gear
electric brake controller and actuator
BBC original orange corvette valve covers
BBC front motorplates... 2 piece kit
BBC BDS blower systems aluminum cog system for vortec mondo or roots blower 5 piece kit with belt
BBC milodon deep oil pan #30950
BBC 4500 spacers and 4150 to 4500 adapter ported by brandywine performance
2 sets of glass Ttops for camaro firebird
Gta map pouch…
Holley Fuel Pressure Regulator 34R-6657B with mount
Harwood hood scoop
FORD stuff
PARTING OUT A 86 GT TTOP car…. Stick setup…. Etc… or sell as whole…
South Side Machine LCA’s
JE pistons for Yates heads…. Small bore…. 4.060 and 4.062 bores……
cobra finned valve covers for efi
kenne bell ram air scoop for under the front bumper….
BRAND NEW 2011 Ford grill in the plastic.... it is the blackout grill..... f150 f250
ford mustang 4 lug 5 star eagle alloy wheels 14x6 15x7
1987-1988 thunderbird turbocoupe low miles cluster...
Set of 8 19 lb injectors
Ansen BBF scattershield…. Vintage late 60s….
Autometer Gauges (some sold not sure which ones will check box and update asap)
Autometer Gauges and Smiths Vintage tach
SMITHS 3” 8k tach made in UK VINTAGE 60’s
2 5/8’s
Sport comp 60-240 degrees water temp #3532
Sport comp Oil Pressure 0-100 psi
Sport Comp Oil pressure 0-100 psi
Sport Comp Oil pressure 0-100 psi
Sport Comp Vacuum #3471
Sport Comp Vacuum / Boost 20 psi
Sport Comp Vacuum / Boost 20psi
Sport Comp #3411 fuel 0-15psi
Sport Comp #3431 Water Temp 140-280 degrees
Summit psi fuel gauge for fuel rail…..0-15 psi
Ultra Light Pro comp Water Temp 130-280 degrees
Brand New in boxes
-#5712 phantom fuel pressure 0-100psi 2 1/16
-#3312 Sport comp fuel pressure 0-100psi 2 1/16
-Sport comp 0-30 vacuum in Hg 2 1/16
Will trade for 2 5/8 Ultra light gauges….or anything else of interest that I might be able to use ….
TIRESSSSSS
Hoosier 29 x 12 x 15 D05 compound slicks
Hoosier Quick time pros 29 x 14.5 x 15 d.o.t (12 inch tread street tire)
MT 28x13.5x15 et street….
chrome gmc denali wheels and tires... 2 tires are in good shape... other 2 need rims need tires.....
MISC
Hood Scoop, Aero Mini II, 31 1/2 in. Long, 15 in. Wide, 7 in. Tall, Fiberglass, Product Code: HRD-3163
I have a BRAND NEW 2011 Ford grill in the plastic.... it is the blackout grill for f150 f250
Silverstar 9007 headlight bulbs brand new in box… like HIDS
Craftsman tool box…4 draw on top 3 on bottom with big cubby hole on bottom
Johhny Lightning collector coins… gold and silver series 1-7
AIR TOOLS - 3/8s air gun, air hammer, maybe 1 or 2 others need to check
2 pairs of brand new jensen 175 watt 6x9 speakers
About a dozen 24v 40 amp relays
I Have more stuff that I recently picked up…. And will update the list when I go through the rest of my storage unit….
BEST OFFERs or TRADE for other stuff that I might be able to use such as game room stuff and metal signs, tools, etc..... I am looking for chevelle fiberglass doors, chevelle race stuff, carbon fiber sheet... and some other stuff...let me know what you got.... Not looking to get rich, just don’t want to trip over this stuff anymore….
__________________
1990 IROC-z28 Convertible ... best et (15.9 @ 86.7)
1970 Chevelle ls5 ... best et (13.97 @ 101.3)
|
|
|
|
10-25-2010, 02:07 PM
|
#2
|
Join Date: Apr 2007
Posts: 326
|
grand national alcohol/methanol injection kit
brand and price?
__________________
92 TY 500RWHP 93oct. Safe Street Tune
87 GN Low Mile 10.4 @ 128
11 CTS V 12.0 @ 116 stock. mow modded
|
|
|
|
|
10-25-2010, 04:56 PM
|
#3
|
Join Date: Nov 2005
Location: North Jersey
Posts: 563
|
Quote:
Originally Posted by Raist103
grand national alcohol/methanol injection kit
brand and price?
|
its one of the first ones that they came out with its a pressure bottle and uses your wiper fluid resovoir.... 50 bucks
__________________
1990 IROC-z28 Convertible ... best et (15.9 @ 86.7)
1970 Chevelle ls5 ... best et (13.97 @ 101.3)
|
|
|
|
|
10-25-2010, 04:57 PM
|
#4
|
Join Date: Nov 2005
Location: North Jersey
Posts: 563
|
All must go.... 2000 bucks
Gave up my storage units so i have everything in my cousins basement....can only keep this stuff there temporary...... will sell seperate or 2000 for everything per forum rules
Chevy/gm
LSx belt tensioners
3rd gen camaro/firebird blower motor
3rd gen ecm ecu camaro/firebird airbag computer...
3rd gen camaro ecm….350 tpi… has a jet chip in it.. 1989 and before…
4th gen camaro b4c taillights with police strobes, front strobes, and controller box...
350 bored .030 over 4 bolt main block....638 block with .030 forged trw pistons
gm heads.... 1.94 1.52 valved
1968 Camaro fender BRAND NEW
1968 camaro fender original (needs some work)
1970-1976 (1971) Camaro glove box door mint…
1968-1972 Chevelle stereo dash pad…
1968-72 a-body bumper jacks….
1968-72 Door glass…
1968-72 Radiator support MINTT
8.2 inch A body rear... 10 bolt... just the case and chrome cover nothing in it.... axle tubes and ends all welded up…..
Garrett 88mm 88 mm inducer 6 inch inlet 4 inch outlet
Garrett 91mm 91 mm inducer 6 inch inlet…. I will include a large rear housing but needs a smaller one for tight cars (150-200 bucks depending on what you need)
hypercoils
1814B0175
2.5" x 14" x 175 Pound Spring
LIKE turbonetics waste gate control valve
grand national champion racing products pushrods
grand national wire harness with provisionsfor F.A.S.T. standalone
grand national EGT probe for tailpipe
grand national alcohol/methanol injection kit
grand national electric fan with shroud….
edelbrock pn 8504 intake bolts
used flex fan spacer
crane cams graphite cam gear
electric brake controller and actuator
BBC original orange corvette valve covers
BBC front motorplates... 2 piece kit
BBC BDS blower systems aluminum cog system for vortec mondo or roots blower 5 piece kit with belt
BBC milodon deep oil pan #30950
BBC 4500 spacers and 4150 to 4500 adapter ported by brandywine performance
2 sets of glass Ttops for camaro firebird
Gta map pouch…
Holley Fuel Pressure Regulator 34R-6657B with mount
Harwood hood scoop
FORD stuff
PARTING OUT A 86 GT TTOP car…. Stick setup…. Etc… or sell as whole…
South Side Machine LCA’s
JE pistons for Yates heads…. Small bore…. 4.060 and 4.062 bores……
cobra finned valve covers for efi
kenne bell ram air scoop for under the front bumper….
BRAND NEW 2011 Ford grill in the plastic.... it is the blackout grill..... f150 f250
ford mustang 4 lug 5 star eagle alloy wheels 14x6 15x7
1987-1988 thunderbird turbocoupe low miles cluster...
Set of 8 19 lb injectors
Ansen BBF scattershield…. Vintage late 60s….
Autometer Gauges (some sold not sure which ones will check box and update asap)
Autometer Gauges and Smiths Vintage tach
SMITHS 3” 8k tach made in UK VINTAGE 60’s
2 5/8’s
Sport comp 60-240 degrees water temp #3532
Sport comp Oil Pressure 0-100 psi
Sport Comp Oil pressure 0-100 psi
Sport Comp Oil pressure 0-100 psi
Sport Comp Vacuum #3471
Sport Comp Vacuum / Boost 20 psi
Sport Comp Vacuum / Boost 20psi
Sport Comp #3411 fuel 0-15psi
Sport Comp #3431 Water Temp 140-280 degrees
Summit psi fuel gauge for fuel rail…..0-15 psi
Ultra Light Pro comp Water Temp 130-280 degrees
Brand New in boxes
-#5712 phantom fuel pressure 0-100psi 2 1/16
-#3312 Sport comp fuel pressure 0-100psi 2 1/16
-Sport comp 0-30 vacuum in Hg 2 1/16
Will trade for 2 5/8 Ultra light gauges….or anything else of interest that I might be able to use ….
TIRESSSSSS
Hoosier 29 x 12 x 15 D05 compound slicks
Hoosier Quick time pros 29 x 14.5 x 15 d.o.t (12 inch tread street tire)
MT 28x13.5x15 et street….
chrome gmc denali wheels and tires... 2 tires are in good shape... other 2 need rims need tires.....
MISC
Hood Scoop, Aero Mini II, 31 1/2 in. Long, 15 in. Wide, 7 in. Tall, Fiberglass, Product Code: HRD-3163
I have a BRAND NEW 2011 Ford grill in the plastic.... it is the blackout grill for f150 f250
Silverstar 9007 headlight bulbs brand new in box… like HIDS
Craftsman tool box…4 draw on top 3 on bottom with big cubby hole on bottom
Johhny Lightning collector coins… gold and silver series 1-7
AIR TOOLS - 3/8s air gun, air hammer, maybe 1 or 2 others need to check
2 pairs of brand new jensen 175 watt 6x9 speakers
About a dozen 24v 40 amp relays
I Have more stuff that I recently picked up…. And will update the list when I go through the rest of my storage unit….
BEST OFFERs or TRADE for other stuff that I might be able to use such as game room stuff and metal signs, tools, etc..... I am looking for chevelle fiberglass doors, chevelle race stuff, carbon fiber sheet... and some other stuff...let me know what you got.... Not looking to get rich, just don’t want to trip over this stuff anymore….
__________________
1990 IROC-z28 Convertible ... best et (15.9 @ 86.7)
1970 Chevelle ls5 ... best et (13.97 @ 101.3)
|
|
|
|
|
10-25-2010, 09:34 PM
|
#5
|
Join Date: Apr 2007
Posts: 326
|
send some pics if it looks good ill take it.
raistlin103@gmail.com
__________________
92 TY 500RWHP 93oct. Safe Street Tune
87 GN Low Mile 10.4 @ 128
11 CTS V 12.0 @ 116 stock. mow modded
|
|
|
|
|
10-25-2010, 09:52 PM
|
#6
|
Join Date: Jul 2009
Location: barnegat nj
Posts: 1,340
|
88 & 91MM TURBOS. pm me details & $ please
__________________
Quote:
Originally Posted by SRGN
I never pulled into the staging beams at the track and saw a dyno in the other lane.
|
South Jersey Racecraft
|
|
|
|
|
10-31-2010, 11:57 AM
|
#7
|
Join Date: Nov 2005
Location: North Jersey
Posts: 563
|
it usues your washer fluid pump and resivoir.. this is just the pressure bottle... sort of looks like a metal overflow tank with nipples on it...ill get pictures next time i get over there
__________________
1990 IROC-z28 Convertible ... best et (15.9 @ 86.7)
1970 Chevelle ls5 ... best et (13.97 @ 101.3)
|
|
|
|
|
10-31-2010, 09:52 PM
|
#8
|
Join Date: Nov 2005
Location: North Jersey
Posts: 563
|
needs to go....
Gave up my storage units so i have everything in my cousins basement....can only keep this stuff there temporary...... will sell seperate or 2000 for everything per forum rules
Chevy/gm
LSx belt tensioners
3rd gen camaro/firebird blower motor
3rd gen ecm ecu camaro/firebird airbag computer...
3rd gen camaro ecm….350 tpi… has a jet chip in it.. 1989 and before…
4th gen camaro b4c taillights with police strobes, front strobes, and controller box...
350 bored .030 over 4 bolt main block....638 block with .030 forged trw pistons
gm heads.... 1.94 1.52 valved
1968 Camaro fender BRAND NEW
1968 camaro fender original (needs some work)
1970-1976 (1971) Camaro glove box door mint…
1968-1972 Chevelle stereo dash pad…
1968-72 a-body bumper jacks….
1968-72 Door glass…
1968-72 Radiator support MINTT
8.2 inch A body rear... 10 bolt... just the case and chrome cover nothing in it.... axle tubes and ends all welded up…..
Garrett 88mm 88 mm inducer 6 inch inlet 4 inch outlet
Garrett 91mm 91 mm inducer 6 inch inlet…. I will include a large rear housing but needs a smaller one for tight cars (150-200 bucks depending on what you need)
hypercoils
1814B0175
2.5" x 14" x 175 Pound Spring
LIKE turbonetics waste gate control valve
grand national champion racing products pushrods
grand national wire harness with provisionsfor F.A.S.T. standalone
grand national EGT probe for tailpipe
grand national alcohol/methanol injection kit
grand national electric fan with shroud….
edelbrock pn 8504 intake bolts
used flex fan spacer
crane cams graphite cam gear
electric brake controller and actuator
BBC original orange corvette valve covers
BBC front motorplates... 2 piece kit
BBC BDS blower systems aluminum cog system for vortec mondo or roots blower 5 piece kit with belt
BBC milodon deep oil pan #30950
BBC 4500 spacers and 4150 to 4500 adapter ported by brandywine performance
2 sets of glass Ttops for camaro firebird
Gta map pouch…
Holley Fuel Pressure Regulator 34R-6657B with mount
Harwood hood scoop
FORD stuff
PARTING OUT A 86 GT TTOP car…. Stick setup…. Etc… or sell as whole…
South Side Machine LCA’s
JE pistons for Yates heads…. Small bore…. 4.060 and 4.062 bores……
cobra finned valve covers for efi
kenne bell ram air scoop for under the front bumper….
BRAND NEW 2011 Ford grill in the plastic.... it is the blackout grill..... f150 f250
ford mustang 4 lug 5 star eagle alloy wheels 14x6 15x7
1987-1988 thunderbird turbocoupe low miles cluster...
Set of 8 19 lb injectors
Ansen BBF scattershield…. Vintage late 60s….
Autometer Gauges (some sold not sure which ones will check box and update asap)
Autometer Gauges and Smiths Vintage tach
SMITHS 3” 8k tach made in UK VINTAGE 60’s
2 5/8’s
Sport comp 60-240 degrees water temp #3532
Sport comp Oil Pressure 0-100 psi
Sport Comp Oil pressure 0-100 psi
Sport Comp Oil pressure 0-100 psi
Sport Comp Vacuum #3471
Sport Comp Vacuum / Boost 20 psi
Sport Comp Vacuum / Boost 20psi
Sport Comp #3411 fuel 0-15psi
Sport Comp #3431 Water Temp 140-280 degrees
Summit psi fuel gauge for fuel rail…..0-15 psi
Ultra Light Pro comp Water Temp 130-280 degrees
Brand New in boxes
-#5712 phantom fuel pressure 0-100psi 2 1/16
-#3312 Sport comp fuel pressure 0-100psi 2 1/16
-Sport comp 0-30 vacuum in Hg 2 1/16
Will trade for 2 5/8 Ultra light gauges….or anything else of interest that I might be able to use ….
TIRESSSSSS
Hoosier 29 x 12 x 15 D05 compound slicks
Hoosier Quick time pros 29 x 14.5 x 15 d.o.t (12 inch tread street tire)
MT 28x13.5x15 et street….
chrome gmc denali wheels and tires... 2 tires are in good shape... other 2 need rims need tires.....
MISC
Hood Scoop, Aero Mini II, 31 1/2 in. Long, 15 in. Wide, 7 in. Tall, Fiberglass, Product Code: HRD-3163
I have a BRAND NEW 2011 Ford grill in the plastic.... it is the blackout grill for f150 f250
Silverstar 9007 headlight bulbs brand new in box… like HIDS
Craftsman tool box…4 draw on top 3 on bottom with big cubby hole on bottom
Johhny Lightning collector coins… gold and silver series 1-7
AIR TOOLS - 3/8s air gun, air hammer, maybe 1 or 2 others need to check
2 pairs of brand new jensen 175 watt 6x9 speakers
About a dozen 24v 40 amp relays
I Have more stuff that I recently picked up…. And will update the list when I go through the rest of my storage unit….
BEST OFFERs or TRADE for other stuff that I might be able to use such as game room stuff and metal signs, tools, etc..... I am looking for chevelle fiberglass doors, chevelle race stuff, carbon fiber sheet... and some other stuff...let me know what you got.... Not looking to get rich, just don’t want to trip over this stuff anymore….
__________________
1990 IROC-z28 Convertible ... best et (15.9 @ 86.7)
1970 Chevelle ls5 ... best et (13.97 @ 101.3)
|
|
|
|
|
10-31-2010, 09:56 PM
|
#9
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,165
|
no need to repost the same list in new threads. recent threads merged.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
|
|
10-31-2010, 10:33 PM
|
#10
|
Join Date: Jul 2009
Location: barnegat nj
Posts: 1,340
|
I have asked about the turbos 2 or three times between this thread and others .............Guess you don't want to sell them.
__________________
Quote:
Originally Posted by SRGN
I never pulled into the staging beams at the track and saw a dyno in the other lane.
|
South Jersey Racecraft
|
|
|
|
|
11-01-2010, 05:17 PM
|
#11
|
Join Date: Nov 2005
Location: North Jersey
Posts: 563
|
somehow my thread got posted in the wanted.... im glad its in the regular area now....
__________________
1990 IROC-z28 Convertible ... best et (15.9 @ 86.7)
1970 Chevelle ls5 ... best et (13.97 @ 101.3)
|
|
|
|
|
11-01-2010, 05:18 PM
|
#12
|
Join Date: Nov 2005
Location: North Jersey
Posts: 563
|
Quote:
Originally Posted by S.J.SLEEPER
I have asked about the turbos 2 or three times between this thread and others .............Guess you don't want to sell them.
|
i told you about them 3 times.... pms.... etc.... come with cash
__________________
1990 IROC-z28 Convertible ... best et (15.9 @ 86.7)
1970 Chevelle ls5 ... best et (13.97 @ 101.3)
|
|
|
|
|
12-12-2010, 11:53 AM
|
#13
|
Join Date: Nov 2005
Location: North Jersey
Posts: 563
|
Christmas SALE.....
Chevy/gm
LSx belt tensioners
3rd gen camaro/firebird blower motor
3rd gen ecm ecu camaro/firebird airbag computer...
3rd gen camaro ecm….350 tpi… has a jet chip in it.. 1989 and before…
4th gen camaro b4c taillights with police strobes, front strobes, and controller box...
350 bored .030 over 4 bolt main block....638 block with .030 forged trw pistons
gm heads.... 1.94 1.52 valved
1968 Camaro fender BRAND NEW
1968 camaro fender original (needs some work)
1970-1976 (1971) Camaro glove box door mint…
1968-1972 Chevelle stereo dash pad…
1968-72 a-body bumper jacks….
1968-72 Door glass…
1968-72 Radiator support MINTT
8.2 inch A body rear... 10 bolt... just the case and chrome cover nothing in it.... axle tubes and ends all welded up…..
Garrett 88mm 88 mm inducer 6 inch inlet 4 inch outlet
Garrett 91mm 91 mm inducer 6 inch inlet…. I will include a large rear housing but needs a smaller one for tight cars (150-200 bucks depending on what you need)
hypercoils
1814B0175
2.5" x 14" x 175 Pound Spring
LIKE turbonetics waste gate control valve
grand national champion racing products pushrods
grand national wire harness with provisionsfor F.A.S.T. standalone
grand national EGT probe for tailpipe
grand national alcohol/methanol injection kit
grand national electric fan with shroud….
edelbrock pn 8504 intake bolts
used flex fan spacer
crane cams graphite cam gear
electric brake controller and actuator
BBC original orange corvette valve covers
BBC front motorplates... 2 piece kit
BBC BDS blower systems aluminum cog system for vortec mondo or roots blower 5 piece kit with belt
BBC milodon deep oil pan #30950
BBC 4500 spacers and 4150 to 4500 adapter ported by brandywine performance
2 sets of glass Ttops for camaro firebird
Gta map pouch…
Holley Fuel Pressure Regulator 34R-6657B with mount
Harwood hood scoop
FORD stuff
PARTING OUT A 86 GT TTOP car…. Stick setup…. Etc… or sell as whole…
South Side Machine LCA’s
JE pistons for Yates heads…. Small bore…. 4.060 and 4.062 bores……
cobra finned valve covers for efi
kenne bell ram air scoop for under the front bumper….
BRAND NEW 2011 Ford grill in the plastic.... it is the blackout grill..... f150 f250
ford mustang 4 lug 5 star eagle alloy wheels 14x6 15x7
1987-1988 thunderbird turbocoupe low miles cluster...
Set of 8 19 lb injectors
Ansen BBF scattershield…. Vintage late 60s….
Autometer Gauges (some sold not sure which ones will check box and update asap)
Autometer Gauges and Smiths Vintage tach
SMITHS 3” 8k tach made in UK VINTAGE 60’s
2 5/8’s
Sport comp 60-240 degrees water temp #3532
Sport comp Oil Pressure 0-100 psi
Sport Comp Oil pressure 0-100 psi
Sport Comp Oil pressure 0-100 psi
Sport Comp Vacuum #3471
Sport Comp Vacuum / Boost 20 psi
Sport Comp Vacuum / Boost 20psi
Sport Comp #3411 fuel 0-15psi
Sport Comp #3431 Water Temp 140-280 degrees
Summit psi fuel gauge for fuel rail…..0-15 psi
Ultra Light Pro comp Water Temp 130-280 degrees
Brand New in boxes
-#5712 phantom fuel pressure 0-100psi 2 1/16
-#3312 Sport comp fuel pressure 0-100psi 2 1/16
-Sport comp 0-30 vacuum in Hg 2 1/16
Will trade for 2 5/8 Ultra light gauges….or anything else of interest that I might be able to use ….
TIRESSSSSS
Hoosier 29 x 12 x 15 D05 compound slicks
Hoosier Quick time pros 29 x 14.5 x 15 d.o.t (12 inch tread street tire)
MT 28x13.5x15 et street….
chrome gmc denali wheels and tires... 2 tires are in good shape... other 2 need rims need tires.....
MISC
Hood Scoop, Aero Mini II, 31 1/2 in. Long, 15 in. Wide, 7 in. Tall, Fiberglass, Product Code: HRD-3163
I have a BRAND NEW 2011 Ford grill in the plastic.... it is the blackout grill for f150 f250
Silverstar 9007 headlight bulbs brand new in box… like HIDS
Craftsman tool box…4 draw on top 3 on bottom with big cubby hole on bottom
Johhny Lightning collector coins… gold and silver series 1-7
AIR TOOLS - 3/8s air gun, air hammer, maybe 1 or 2 others need to check
2 pairs of brand new jensen 175 watt 6x9 speakers
About a dozen 24v 40 amp relays
I Have more stuff that I recently picked up…. And will update the list when I go through the rest of my storage unit….
$$$$$2000 for everything per forum rules..... $$$$$$$$$$$
BEST OFFERs or TRADE for other stuff that I might be able to use such as game room stuff and tin metal signs, tools, etc..... I am looking for chevelle fiberglass doors, chevelle race stuff, carbon fiber sheet... and some other stuff...let me know what you got.... Not looking to get rich, just don’t want to trip over this stuff anymore….
__________________
1990 IROC-z28 Convertible ... best et (15.9 @ 86.7)
1970 Chevelle ls5 ... best et (13.97 @ 101.3)
|
|
|
|
|
04-20-2011, 04:22 PM
|
#14
|
Join Date: Nov 2005
Location: North Jersey
Posts: 563
|
Spring swap meet leftovers!!!!!
Chevy/gm
FELPRO #1885 1 piece oil pan gasket
Manley 11548-valves for a 455 oldsmobile..
LSx belt tensioners
3rd gen camaro gauge cluster bezels and plastic
3rd gen camaro/firebird blower motor
3rd gen ecm ecu camaro/firebird airbag computer...
3rd gen camaro ecm….350 tpi… has a jet chip in it.. 1989 and before…
4th gen camaro b4c taillights with police strobes, front strobes, and controller box...
350 bored .030 over 4 bolt main block....638 block with .030 forged trw pistons
gm heads.... 1.94 1.52 valved
Black leather camaro steering wheel out of a 1999 camaro with airbag
1998 camaro ecm….
1968 NOVA PARTS (driver side door handle and lock, Driver side mirror, red marker lights and plastic bezels)
1967-1969 Camaro door sill body by fisher plates (BRAND NEWW)
1968 Camaro fender BRAND NEW
1968 camaro fender original (needs some work)
1970-1976 (1971) Camaro glove box door mint…
1968-1972 Chevelle stereo dash pad…
1968-1972 Body by fisher door sill plates
1968-72 a-body bumper jacks….
1968-72 Door glass…
1968-72 Radiator support MINTT
8.2 inch A body rear... 10 bolt... just the case and chrome cover nothing in it.... axle tubes and ends all welded up…..
hypercoils
1814B0175
2.5" x 14" x 175 Pound Spring
grand national champion racing products pushrods
grand national EGT probe for tailpipe
grand national alcohol/methanol injection kit
grand national electric fan with shroud….
used flex fan spacer
crane cams graphite cam gear
electric brake controller and actuator
BBC BDS blower systems aluminum cog system for vortec mondo or roots blower 5 piece kit with belt
BBC milodon deep oil pan #30950
BBC brodix aluminum tall valve covers with billet fill screw cap and setup for vacuum pump with an fittings
BBC manley valves…11525-8
Jesel shaft mount rockers 1.80 ratio and 1.85 ratio (no stands)
Jesel shaft mount rockers 1.65 ratio and 1.70 ratio (no stands)
BBC 4150 to 4500 adapter ported by brandywine performance
2 sets of glass Ttops for camaro firebird
Gta map pouch…
Holley Fuel Pressure Regulator 34R-6657B with mount
FORD stuff
South Side Machine LCA’s
2 sets JE pistons for Yates heads…. Small bore and gas ported…. 4.060 and 4.062 bores……
Crower solid lifters for 18 degree motor
jesel shaft mount rockers… 1.72 ratio and 1.80 ratio
kenne bell ram air scoop for under the front bumper….
BRAND NEW 2011 Ford grill in the plastic.... it is the blackout grill..... f150 f250
ford mustang 4 lug 5 star eagle alloy wheels 14x6 15x7
1987-1988 thunderbird turbocoupe low miles cluster...
Ansen BBF scattershield…. Vintage late 60s…
Ansen Big block ford FE aluminum valve covers. (vintage)
CSI flexplate sfi 29.1 429 or 460 ford… NEW….
{{{{{{{{{{{{GAUGES}}}}}}}}}}}}}}}}}}}}
Autometer Gauges (some sold not sure which ones will check box and update asap)
Autometer Gauges and Smiths Vintage tach
COMPLETE SET OF VDO WHITE FACE GAUGES AND SPEEDO
(3 3/8 120 mph speedo with trip od, 2 1/16 Water temp, fuel level,oil pressure, and volts)
WHITE FACE GM bowtie Autometer gauges (3 3/8 120 speedo 0 miles brand new, 2 5/8 oil pressure and water temp)
SMITHS 3” 8k tach made in UK VINTAGE 60’s
2 5/8’s
Sport comp AMPS
Sport comp 60-240 degrees water temp #3532
Sport comp Oil Pressure 0-100 psi
Sport Comp Oil pressure 0-100 psi
Sport Comp Oil pressure 0-100 psi
Sport Comp Oil pressure 0-100psi
Sport Comp Vacuum #3471
Sport Comp Vacuum / Boost 20 psi
Sport Comp Vacuum / Boost 20psi
Sport Comp #3411 fuel 0-15psi
Sport Comp #3431 Water Temp 140-280 degrees
Summit psi fuel gauge for fuel rail…..0-15 psi
Ultra Light Pro comp Water Temp 130-280 degrees
Brand New in boxes
-#5712 phantom fuel pressure 0-100psi 2 1/16
-#3312 Sport comp fuel pressure 0-100psi 2 1/16
-#3337 Water Temp 100-250 degrees
-Sport comp 0-30 vacuum in Hg 2 1/16
US Gauge 2 1/16 0-200 psi
Will trade for 2 5/8 Ultra light gauges….or anything else of interest that I might be able to use ….
TIRESSSSSS
Hoosier 29 x 12 x 15 D05 compound slicks
Hoosier Quick time pros 29 x 14.5 x 15 d.o.t (12 inch tread street tire)
MISC
Garrett 88mm 88 mm inducer 6 inch inlet 4 inch outlet
Garrett 91mm 91 mm inducer 6 inch inlet…. I will include a large rear housing but needs a smaller one for tight cars (150-200 bucks depending on what you need)
1963-64 oldsmobile acqua blue convertible top boot
Tekonsha Voyager trailer brake controller
I have a BRAND NEW 2011 Ford grill in the plastic.... it is the blackout grill for f150 f250
Silverstar 9007 headlight bulbs brand new in box… like HIDS
Kennedy tool box…6 drawer… heavy duty…. Stainless steel top…
Johhny Lightning collector coins… gold and silver series 1-7
AIR TOOLS - 3/8s air gun, air hammer, maybe 1 or 2 others need to check
brand new jensen 175 watt 6x9 speakers
About a dozen 24v 40 amp relays
I Have more stuff that I recently picked up…. And will update the list when I go through the rest of my swap meet leftovers….
BEST OFFERs or TRADE for other stuff that I might be able to use such as game room stuff and metal signs, tools, etc..... I am looking for chevelle fiberglass doors, , carbon fiber sheet... and some other stuff...let me know what you got.... Not looking to get rich, just don’t want to trip over this stuff anymore….
AS PER FORUM RULES.... $$$3500 for everythinggggg....
$ 3500 or best offer for individual parts.... if stuff sells individual i will donate money to the site to help with operational costs....
thanks
__________________
1990 IROC-z28 Convertible ... best et (15.9 @ 86.7)
1970 Chevelle ls5 ... best et (13.97 @ 101.3)
|
|
|
|
|
04-20-2011, 05:40 PM
|
#15
|
Join Date: Aug 2009
Location: HowELL, NJ
Posts: 83
|
Please send pics of the tool box(s) and how much your looking to get for them
|
|
|
|
|
04-21-2011, 10:21 PM
|
#16
|
Join Date: Nov 2005
Location: North Jersey
Posts: 563
|
looking to get 250 firm for the kennedy... it was 900 new... email for pictures
__________________
1990 IROC-z28 Convertible ... best et (15.9 @ 86.7)
1970 Chevelle ls5 ... best et (13.97 @ 101.3)
|
|
|
|
|
04-22-2011, 02:03 AM
|
#17
|
Join Date: Oct 2008
Posts: 814
|
T top stang still for sale? If so, can I get pics?
__________________
Formerly known as njbadaSS
|
|
|
|
|
04-22-2011, 06:25 PM
|
#18
|
Join Date: Dec 2009
Location: south jersey
Posts: 0
|
You where at englishtown I was there on sat. morning didnt see many chevelle parts.Can you send me a pic of the rad support?Also I think 68-69 are different than 70-71-72 arent they?
What kind of shape is the glass in?
Thanks
waykustom@comcast.net
|
|
|
|
|
04-22-2011, 07:38 PM
|
#19
|
Join Date: Oct 2009
Location: Sicklerville, NJ (South Jersey)
Posts: 450
|
Just for the hell of it. How much for the 9007 Silverstars? Shipped to 08081 lol.
__________________
1994 Z28 M6
Cat Back
|
|
|
|
|
04-23-2011, 06:37 PM
|
#20
|
Join Date: Nov 2005
Location: North Jersey
Posts: 563
|
Quote:
Originally Posted by Jared1970Chevelle
looking to get 250 firm for the kennedy... it was 900 new... email for pictures
|
Quote:
Originally Posted by NjbadSS
T top stang still for sale? If so, can I get pics?
|
yes.....
Quote:
Originally Posted by kustom71
You where at englishtown I was there on sat. morning didnt see many chevelle parts.Can you send me a pic of the rad support?Also I think 68-69 are different than 70-71-72 arent they?
What kind of shape is the glass in?
Thanks
waykustom@comcast.net |
yea i didnt bring a lot of stuff this year due to bad economy and no one having money down there.... i dont think i have a picture of the rad support on this computer.. but its in great mint shape... not sure about the years but i think they are all different.. i know i have a 70 tho with the 2 teardrops... the glass is in nice driver shape... i wouldnt consider it 100 point showcar glass.... are you the guy that i was talking to about the lenco trans and setup?
Quote:
Originally Posted by Green_Phoenix_LT1
Just for the hell of it. How much for the 9007 Silverstars? Shipped to 08081 lol.
|
make an offer or trade///
__________________
1990 IROC-z28 Convertible ... best et (15.9 @ 86.7)
1970 Chevelle ls5 ... best et (13.97 @ 101.3)
|
|
|
|
|
04-24-2011, 05:47 PM
|
#21
|
Join Date: Dec 2009
Location: south jersey
Posts: 0
|
No I only talked to one guy about chevelle parts and the jerkoff tried to beat me!
Let me think about the glass and check on the rad support
Thanks
|
|
|
|
|
04-24-2011, 06:34 PM
|
#22
|
Join Date: Nov 2005
Location: North Jersey
Posts: 563
|
Quote:
Originally Posted by kustom71
No I only talked to one guy about chevelle parts and the jerkoff tried to beat me!
Let me think about the glass and check on the rad support
Thanks
|
no problem... ill get pics of the rad support asap.... the chevelle guy down on the 1/8 mile track? if so he was pricey....
__________________
1990 IROC-z28 Convertible ... best et (15.9 @ 86.7)
1970 Chevelle ls5 ... best et (13.97 @ 101.3)
|
|
|
|
|
04-25-2011, 09:51 PM
|
#23
|
Join Date: Jul 2008
Location: Bayonne, NJ
Posts: 69
|
Camaro fenders
what side is new
what is "some work" rot, dented?
68 camaro fenders
how much each? 
Last edited by Azmedian; 04-25-2011 at 09:51 PM.
|
|
|
|
|
04-25-2011, 09:55 PM
|
#24
|
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,531
|
jared got n e nitrous pressure and trans temp gauges? i need em asap
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
|
|
04-25-2011, 10:38 PM
|
#25
|
Join Date: Nov 2005
Location: North Jersey
Posts: 563
|
Quote:
Originally Posted by Azmedian
what side is new
what is "some work" rot, dented?
68 camaro fenders
how much each? |
1 is brand new nos...
1 is used and could use a lower patch panel or to be repaired... i guess you can say a little rusted...
200 for the nos
75 for the needing repair
__________________
1990 IROC-z28 Convertible ... best et (15.9 @ 86.7)
1970 Chevelle ls5 ... best et (13.97 @ 101.3)
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
